• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.8
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• Journal of Information Technology Services
• /
• v.5 no.2
• /
• pp.155-168
• /
• 2006

Software product line is a software product or a set of software system, which has common functions. We can develop a specific software product, which satisfies requirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed software architecture through the software product line. Software development methodology based on the software product line can develop a software more easily and fast by reusing the developed software core asset. Developed countries of software technology select software product line as a core field of software production technology, and support technology development. In case of USA, CMU/SEI(Carnegie Mellon University/Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Department of Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. However, industries in our country understand the necessity of software production technology based on product line concept for the purpose of increasing productivity, it is not sufficient to invest for this technology development. In this paper, we aim to construct the common architecture of software product line for production of the software product line.

• Child Health Nursing Research
• /
• v.11 no.3
• /
• pp.263-272
• /
• 2005

Purpose: This study was done to identify the scope of internet addiction in school age children in early grades of elementary school in Korea, and to identify factors affecting internet addiction fur these children. Method: The participants were 408 children from in grades 1 to 4 in four urban elementary schools. Data were collected through self-report questionnaires which were constructed to include a parent-child internet addiction test, a self-control rating scale, and a scale of parent control of on-line use. The data were analyzed using the SPSS program. Results: Of the children, $71.6\%$ reported being average on-line users, $27.9\%$, heavy on-line users, and $0.5\%$, internet addicted. Self control and parent control of on-line use for average on-line users were different from that of heavy on-line users. Significant predictors influencing internet addiction were time spent on-line, self control, gender, father's occupation, on-line games, on-line use alone, and conversation with parents. These predictors accounted for $42\%$ of variance in internet addiction. Conclusion: The prevalence of heavy on-line use in children was higher than expected, and internet addiction was influenced by self control, time spent on-line, and related factors. Therefore nursing interventions for prevention and management of internet addiction need to be developed and provided to these children.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.550-553
• /
• 1993

Methods of Alternating Noise Canceling were previously developed for the optical instrumentation;one using a dual photo sensor and another using a single photo sensor that could cancel normal mode noise on a transmission line, even if the noise was of equal status noise. But the methods could not remove noise on sensor line. This paper discusses a new method of using a photo sensor with a resistance sensordummy, effectively canceling equal status normal mode noise not only on a sensor line but also on a transmission line of an optical instrumentation. The accuracy of this method has been verified by experiments using sinusoidal wave as an equal status noise on a sensor line and/or rectangular wave as an equal status wide band noise on a transmission line respectively.

• Journal of the Korean Home Economics Association
• /
• v.37 no.1
• /
• pp.157-167
• /
• 1999

This study was designed to identify the recent status of the catalog and on-line apparel shopping in Korea and compare to those in the U.S.. Data were gathered from 308 respondents in Korea and 112 in the U.S. by the on-line survey. The results are as follows; 1) The U.S. consumers had more apparel shopping experience and higher level of satisfaction than Korean consumers about the catalog and on line apparel shopping, 2) Although the residents in Taejon area had less apparel shopping experience using catalog and on-line facilities than those in Seoul area, they showed higher level of interests about on-line shopping in Korea. 3) Male respondents had more shopping experience using pc-net and internet than female respondents, and the interests about on-line shopping of the younger group were higher than those of the older age group.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.176-180
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers is designed, which has been installed inside the oil tank of transformer in a substation by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.1
• /
• pp.75-94
• /
• 2002

The development of Information technologies huts contributed on-line training as one of important education methods. On-line training In firms, which is similar to e-learning or virtual education, provides trainees with more education opportunities in diverse ways. It has developed a range of innovative services with an one-stop solution of education within the electronic sector. Also under the on-line training environment, trainees can undertake customized training packages at anytime and any places. Moreover, information technology allows both the trainers and other trainees to be decoupled in any of the elements of time, place, and space. Two research questions are investigated : what are the determinants affecting the on-line training effectiveness and how those variables effect the two aspects of training effectiveness: learning performance and transfer performance. Based on the previous literature conducted on the traditional training environment, the determinants of training effectiveness are derived. light hypotheses are developed based on literature reviews and tested by questionnaires survey data. The collected data have been analyzed by LISREL. It is found that the relationship between individual, organizational and on-line sloe design variables and training effectiveness (learning and transfer) are significant. The contribution and limitations of this research are also discussed tilth future studies.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.2
• /
• pp.79-87
• /
• 2023

On-line learning has been adopted as a major educational method due to the COVID-19 pandemic. Students and faculties got accustomed to on-line educational environment as they experienced it during the COVID-19 pandemic. Development of various technologies and social requirement for educational renovation lay groundwork for on-line learning as well. Therefore, on-line learning or blended learning will be likely to go on after the end of COVID-19 pandemic and it is necessary to prepare the guidelines for effective utilizing on-line learning. The primary purpose of this study is to examine the learning behaviors and the learning effects by using LMS data. Learning behaviors were measured in terms of learning time and access frequency for pre-recorded video lectures targeting computer-practice classes. The results of empirical analysis reveal that frequency was the significant predictor of course achievements but learning time was not. The findings of empirical analysis will provide insights that the effective planning and designing on-line classes based on learning behaviors are key to enhancing learning effects and learner's satisfaction.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.563-572
• /
• 2002

A performance monitor is indispensable to trace and evaluate performance of a program under distributed processing environment. A performance monitor il classified as off-line and on-line according to its output method. An off-line performance monitor analyzes its performance after a program terminates, and an on-line performance monitor analyzes its one while a program runs. Therefore, the on-line function is essential to analyzing and debugging the program fast. JaNeC, distributed processing environment that is implemented in Java, contains an off-line performance monitor for this. However, this performance monitor may not analyze the program running on JaNeC efficiently. Consequently, this paper explains that an on-line performance monitor is designed and implemented for fast analysis and debugging of the program running on JaNeC. This on-line performance monitor is designed to minimize effects on a program to analyze, and provides various forms of graphic output, to analyze the program effectively. In addition, even after a program terminates, it provides interface with the off-line performance monitor, to analyze again.