• 제목/요약/키워드: oil repellent

검색결과 57건 처리시간 0.039초

졸-겔법을 이용한 PET섬유의 발수.방오.발유 특성 (Water repellent, Antisoil, Oil repellent Properties of PET fabric Using Sol-Gel Method)

  • 권일준;박성민;김지연;김창남;염정현
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2008년도 제39차 학술발표회
    • /
    • pp.123-124
    • /
    • 2008
  • 본 연구는 $TiO_2$ 졸을 제조한 후 폴리에스테르 표준백포에 1차로 패딩한 후 불소고분자의 탄소수가 6개인 플르오르 실란계 발수제(UNIDYNE TG-5521, DAIKIN)를 2차로 패딩하여 그에 따른 발수성과 방오성, 발유성 향상에 관한 연구이다.

  • PDF

발수 처리한 ALC 분말이 유화처리 정제유지류(ERCO) 혼입 모르타르의 품질특성에 미치는 영향 (Effects of Water Repellency Treated ALC Powder on the Properties of Mortar Mixed with ERCO)

  • 이명호;박준희;김상섭;박재용;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.112-113
    • /
    • 2014
  • This study was done to resolve the air reduction in mortar when mixed with ERCO. Effects of the water repellent ALC powder due to its particle size and substitution ratio on the cement mortar with ERCO was analyzed. Results showed more water repellent ALC powder ensured more air but did not affect the size of particles. It was determined the compression was caused by more air and water added to achieve the flow. Therefore, substituting with water repellent ALC powder may compensate for the air reduction in mortar with ERCO. Other measures and approaches are needed in order to resolve the reduced strength.

  • PDF

담배가루이에 대한 Wild Mint 오일의 기피효과 (Repellent Effect of Wild Mint Oil Against Sweetpotato Whitefly, Bemisia tabaci)

  • 정진원;문상래;조선란;신윤호;김길하
    • 농약과학회지
    • /
    • 제14권4호
    • /
    • pp.433-439
    • /
    • 2010
  • 담배가루이 성충에 대한 식물정유의 기피효과를 조사하기 위하여, 20종의 식물정유를 대상으로 담배가루이 성충의 기피반응을 검정한 결과, mint 오일만이 $5{\mu}{\ell}$의 약량처리에서 90% 이상의 높은 기피효과를 나타내었다. 2, 1, 0.5, $0.1{\mu}{\ell}$ 약량처리에서는 77.8~65.7%로 농도의존적으로 유의성이 나타났다. Wild mint 오일을 분석하고 생물검정을 수행한 결과, GC/MS 분석으로 wild mint oil의 주요 구성성분이 menthol(56.5%), menthone(29.0%), menthyl acetate(14.5%)로 밝혀졌으며, 기피활성을 보인 주요구성성분은 원래 오일에 함유되어 있는 비율로 $10{\mu}{\ell}$ 오일을 처리하였을 때 menthol과 menthone이 각각 77.8과 75.8%의 기피효과를 나타내었으며, menthyl acctate는 유의성이 없었다. 주요 구성성분을 혼합하여 잠정한 결과, 단독검정시와 비교하여 기피효과가 더 높게 나타났다.

Attraction and Repellent Behaviors of Culicoides Biting Midges toward Cow Dung, Carbon Dioxide, and Essential Oils

  • Yang, Daram;Yang, Myeon-Sik;Kim, Bumseok
    • Parasites, Hosts and Diseases
    • /
    • 제59권5호
    • /
    • pp.465-471
    • /
    • 2021
  • Culicoides biting midges (Diptera: Ceratopogonidae) are hematophagous arthropod vectors that transmit epizootic arthropod-borne viruses (arboviruses). Arboviruses are recognized as causes of pregnancy loss, encephalomyelitis, and congenital malformations in ruminants. Therefore, continuous monitoring and control of Culicoides, which causes significant damage to industrial animals are necessary. We performed attraction and repellent tests in Culicoides using various essential oils, cow dung, and carbon dioxide (CO2). Culicoides tended to move more to cow dung (60.8%, P<0.0001) and CO2 (63.8%, P<0.01). To the essential oils as repellents, 26.1% (P<0.0001), 18.7% (P<0.001), and 25.5% (P<0.01) of the Culicoides moved to the lavender, lemongrass, and eucalyptus chamber, respectively. The Culicoides that moved to the 3 essential oils chambers showed markedly low activity. Collectively, it was showed that Culicoides tended to be attractive to cow dung and CO2, and repellent from the 3 essential oils.

Wool 직물의 나노 발수 발유가공 (Water and Oil Repellency of Wool Fabric Treated with Nano-type Finishing Agent)

  • 최보련;한삼숙;이문철
    • 한국염색가공학회지
    • /
    • 제20권6호
    • /
    • pp.26-34
    • /
    • 2008
  • Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

화랑곡나방 유충 방제를 위한 회향오일 기반 방충향낭 개발 (Development of a Fennel (Foeniculum vulgare) Oil-based Anti-insect Sachet to Prevent the Indian Meal Moth (Plodia interpunctella))

  • 이수현;조헌주;이윤정;한재준
    • 한국포장학회지
    • /
    • 제19권2호
    • /
    • pp.81-85
    • /
    • 2013
  • 본 연구의 목적은 식품 포장재를 뚫고 침입하여 식품에 큰 피해를 입히는 화랑곡나방 유충의 유입을 방지하기 위한 방충향낭을 개발하는 것이다. 방충 물질로는 해충에 대해 살충 및 기피력을 가지는 것으로 알려진 회향의 에센셜오일인 회향오일(FO)을 선정하였다. 훈증테스트를 통하여 화랑곡나방 유충에 대해 FO의 훈증사멸 효과를 관찰하였고 120시간 후 FO은 약 56%의 사멸률을 보였다. 이 후 포장기법 중 하나인 향낭 기법을 사용하여 FO 향낭을 제조하여 기피효과를 측정하였다. 그 결과, FO 향낭은 무처리구와 비교하여 유의적인 기피효과를 보였다. 하지만 휘발성이 강한 에센셜오일의 특성으로 인해 48시간에서의 기피력이 24시간이 지난 향낭의 기피력보다 낮은 것을 볼 수 있었다. Gas chromatography를 이용한 FO 향낭의 방출 경향 분석에 따르면 오일의 총 방출량 및 trans-aenthole의 함량이 일정 시간 이후 점차 방출량이 줄어드는 경향을 보였다. 따라서 FO 향낭은 방충력을 가지는 것으로 분석되지만 높은 휘발성으로 인해 기피력은 시간이 지날수록 감소할 것으로 보인다.

  • PDF

폴리에스테르 직물의 발수발유 가공처리가 유성오구의 부착 및 제거에 미치는 영향 (The Effects of Water-and Oil-Repellent Finishes on the Deposition and Removal of Oily Soils from Polyester Fabrics)

  • 이정숙
    • 대한가정학회지
    • /
    • 제35권4호
    • /
    • pp.257-268
    • /
    • 1997
  • The effects of water-and oil-repellent finishes on the deposition and removal of oily soils from polyseter fabrics were investigated in this study. The polyester fabrics treated with three kinds of fluoropolymers(TG-410H, TG-990) were soiled with mixed oily soils and washed by using Terg-O-Tometer at various conditions. It was found that TG-410H and TG-527 treated polyester fabrics reduced significantly the deposition of oily soils than untreated and TG-990 treated polyester fabrics. The removal of oily soils from polyester fabrics was increased in porportion to increasing of surfactant concentration up to a certain point(0.2% owb) but it levelled off above the point. The removal effect was high in the order of TG-990 treated polyester fabrics > untreated polyester fabrics > TG-527 treated polyester fabrics > TBG-410H treasted polyester fabrics. Especially the removal of oily soils from polyester fabrics was more effectively removed in triton X-100 solution. In general the removal of oily soils from polyester fabrics treated with fluoropolymers was increased up to a miximum near 6$0^{\circ}C$ and than decreased above 6$0^{\circ}C$. And efficient removal could be achieved within relatively short time (30min) The removal of oily soils from polyester fabrics was increased in proportion to increasing of pH range up to a certain point(9.5 or 11.0) but it began to decrease above the point. Furthermore the removal of oily soils was increased with th increase of mechanical agitation, but it began to decrease above 160 rpm.

  • PDF

연꽃잎을 모사한 초소수성 표면 제작 (Fabrication of the Superhydrophobic Surface Inspired from Lotus-Effect)

  • 정대환;임현의;노정현;김완두
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.409-414
    • /
    • 2007
  • Wettability of solid surfaces with liquids is governed by the chemical properties and the microstructure of the surfaces. We report on the preparation of liquid-repellent surfaces using surface-attached monolayers of perfluorinated polymer molecules on porous silica substrates. A covalent attachment of the polymer molecules to the substrate is achieved by generation of the polymer chains through starting a surface-initiated radical-chain polymerization of a fluorinated monomer. To this, self-assembled monolayers of azo initiators are attached to silica substrates, which are used to kick off the polymerization reaction in situ. The growth of the fluorinated polymer films and the characterization of the obtained surfaces by surface plasmon spectroscopy, XPS, and contact angle measurements is described. It is shown that perfluorinated polymer films can be grown with controlled thicknesses on flat and even on porous silica surfaces, essentially without changing the surface roughness. The combination of the low surface energy coating and the surface porosity allows generation of materials which are both water and oil repellent.

  • PDF