• 한국통신학회논문지
• /
• 제31권6C호
• /
• pp.623-628
• /
• 2006

본 논문에서는 직교 주파수 분할 다중 (orthogonal frequency division multiplexing: OFDM) 방식의 무선 전송 시스템에서 시간 오차가 (timing error) 존재할 때 주파수 옵셋을 (frequency offset) 추정하는 기법에 대해 다루었다. 시간 오차가 존재하면, 주파수 옵셋 추정식의 상관값이 (correlation value) 감소하게 되어 추정 성능의 감소를 가져온다. 이를 해결하기 위하여, 동기 위상 범위와 문턱값 기반의 주파수 옵셋 추정 기법을 제안하였다. 더불어 이를 기반으로 한 시간 오차 추정기법을 제안하였다. 제안한 기법의 성능을 평가하기 위해서 모의실험을 수행하였고, 제안한 기법이 기존 기법보다 연산 복잡도가 낮으며 시간 오차에 강인함을 확인하였다. 제안한 시간 오차 추정기법은 주파수 옵셋 재 추정에 사용될 수 있으며, 신뢰성 있는 추정값을 제공함을 보였다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1593-1600
• /
• 2015

This paper proposes a novel compensation algorithm of current offset error for single-phase linear compressor in home appliances. In a half-bridge inverter, current offset error may cause unbalanced DC-link voltage when the DC-link is comprised of two serially connected capacitors. To compensate the current measurement error, the synchronous reference frame transformation is used for detecting the measurement error. When an offset error occurs in the output current of the half-bridge inverter, the d-axis current has a ripple with frequency equal to the fundamental frequency. With the use of a proportional-resonant controller, the ripple component can be removed, and offset error can be compensated. The proposed compensation method can easily be implemented without much computation and additional hardware circuit. The validity of the proposed algorithm is verified through experimental results.

• 대한전자공학회논문지SD
• /
• 제45권5호
• /
• pp.26-32
• /
• 2008

아날로그 WTA 회로의 성능은 코너 오차와 옵셋 오차에 영향을 받는다. 코너 오차는 큰 트랜스컨덕턴스를 가진 트랜지스터가 그 해결방안으로 제시되고 있지만, 소자 부정합에 의한 옵셋 오차 제거 방법에 대한 연구는 아직 미진한 상태이다. 본 논문은 WTA에서의 옵셋 오차를 분석하고, 옵셋을 줄이는 설계 가이드라인과 발생한 옵셋의 영향을 제거하는 회로를 제안한다. 실험 결과는 이론적 분석의 타당함과 옵셋 오차가 현저하게 개선되었음을 보여준다.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.402-409
• /
• 2022

In vector-controlled drive systems, the current measurement offset error causes unwanted torque ripple, resulting in speed and torque control performance degradation. The current measurement offset error is caused by various factors, including thermal drift. This study proposes a simple DC offset error compensation method for a surface permanent magnet motor based on a disturbance observer. The disturbance observer is designed in the stationary reference frame. The proposed method uses only the measured current and machine parameters without additional hardware. The effect of parameter variations is analyzed, and the performance of the current measurement offset error compensation method is validated using simulation and experimental results.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.72-79
• /
• 2019

Despite the development of electronic components and microprocessors, hydraulic actuators are still being applied in various applications. In some applications, there is a desire to apply a hydraulic actuator with a relatively small position error to the system. Various studies have been conducted to reduce the position error of hydraulic actuators. In this paper, the position error of the hydraulic actuator when the hydraulic oil pressure is supplied is defined as the offset generated by the servo valve, and the method for correcting the servo valve offset has been studied. A method for compensating the servo valve offset was proposed and it was verified through experiments that the position error of the hydraulic actuator was reduced. We also compared the servo valve offset correction method and controller using the PID control and disturbance observer used to reduce the position error of the hydraulic actuator. No-load test and load test were performed to confirm the performance of the servo valve offset correction method. The results of the study were compared with those obtained by using the disturbance observer and PID control.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.68-76
• /
• 2014

This paper presents an offset error compensation algorithm for the accurate phase angle of the grid voltage in single-phase grid-connected inverters. The offset error generated from the grid voltage measurement process cause the fundamental harmonic component with grid frequency in the synchronous reference frame phase lock loop (PLL). As a result, the grid angle is distorted and the power quality in power systems is degraded. In addition, the dq-axis currents in the synchronous reference frame and phase current have the dc component, first and second order ripples compared with the grid frequency under the distorted grid angle. In this paper, the effects of the offset and scaling errors are analyzed based on the synchronous reference frame PLL. Particularly, the offset error can be estimated from the integrator output of the synchronous reference frame PLL and compensated by using proportional-integral controller. Moreover, the RMS (Root Mean Square) function is proposed to detect the offset error component. The effectiveness of the proposed algorithm is verified through simulation and experiment results.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 2004

In this study, the inspection path which is considered to free collision is generated by offset surface. When the inspection is executed, the consideration of machine dynamic error increases a precision. Dynamic error is measured on CNC machine bed changing of weight work price. Offset surface is safety space about collision. Because the danger of probe-collision is excluded in Offset surface, it is possible to rapid feed of probe and reduced inspection time. The Program which is possible to simulate using CAIP and is confirmed through actual experiment.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.19-27
• /
• 2004

The characteristic evaluation of A/D converter is to measure the linearity of the converter. The evaluation of the linearity is to measure the DNL, INL, gain error and offset error in the various test parameters of A/D converter. Generally, DNL and INL are to be measured by the Histogram Test Algorithm in the DSP-based ATE environment. And gain error and offset error are to be measured by the calculation equation of the measuring algorithm. It is to propose the new Concurrent Histogram Test Algorithm for the test of the housekeeping A/D converter used in the CDMA cellular phone. Using the proposed method, it is to measure the DNL, INL, gain error and offset error concurrently and to show the measured results.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.140-146
• /
• 2005

본 논문에서는 HDR-WPAN 시스템에 적합한 주파수 옵셋 보상과 누적 위상오차를 개선할 수 있는 트래킹 알고리즘을 제안하고 이에 대해 분석하였다. 주파수 옵셋 보상 알고리즘은 CAZAC sequence의 자기상관 특성을 이용하여 각 심벌 내 샘플 간 위상오차를 통해 coarse 주파수 옵셋과 fine 주파수 옵셋을 추정하게 된다. 그러나 HDR-WPAN 시스템은 payload에 pilot 심벌이 없기 때문에 payload 길이가 길어질수록 샘플 간 미소 위상오차가 누적되어 수신단의 성상도가 회전하게 된다. 따라서 트래킹 알고리즘을 통해 틀어진 누적 위상오차를 보상해야 한다. 트래킹은 성상도내 들어온 신호가 일정 영역을 벗어나게 되면, 벗어난 만큼의 크기 ${\theta}$을 곱해 누적된 미소 위상오차를 보상하게 된다.