• 제목/요약/키워드: observed deviation

검색결과 764건 처리시간 0.031초

열가압성형도재의 사용이 금속도재관 치경부 변연적합도에 미치는 영향 (The effect of heat and press-on-metal technique on marginal fit of metal-ceramic crown)

  • 김지은;김세연;이청희
    • 대한치과보철학회지
    • /
    • 제52권2호
    • /
    • pp.90-96
    • /
    • 2014
  • 연구 목적: 이 연구의 목적은 열가압성형기법이 금속도재관의 치경부 변연적합도에 미치는 영향을 확인하는 것이다. 연구 재료 및 방법: 실험에 앞서, 4개의 금속 주모형을 형성하였다. 각 모형은 각각chamfer, heavy chamfer, shoulder with bevel, shoulder (collarless)변연을 형성하였다. 각 변연당 10개씩의 금관을 제작하여, 총 40개를 제작하였다. Coping 단계에서, 그리고 금속도재관 완성 단계에서 주모형과 금관 사이의 변연간극은 100배율의 광학현미경 관찰을 통하여 측정되었다. Data분석은 paired t-test along with one-way ANOVA와 Duncan multiple comparison test를 이용하여 이루어졌다. 결과: 변연간극의 평균과 표준편차를 분석한 결과, 금속 코핑과 그 후 완성된 금속도재관, 모든 경우에서 변연부 간격은 임상적 허용범위 안에 있었다. Chamfer 변연 실험군의 경우 Heavy chamfer 변연 실험군에 비하여 금속도재관 완성 후 변연부 간격의 유의한 증가가 있었다. 그리고Shoulder 변연 실험군에서 도재로 처리된 변연이 Chamfer와 Shoulder변연 실험군의 금속변연에 비하여 변연부 간격이 유의하게 작게 나타났다. 결론: 열가압성형기법을 통하여 제작한 금속도재수복물의 변연적합도는 전통적인 방법으로 제작한 금속도재수복물의 변연적합도와 유의한 차이점이 없었다. 제작과정의 효율성으로, 열가압성형기법은 임상에서의 효과적인 사용법으로 고려될 수 있다.

부가중합형 실리콘 교합인기재의 탄성 특성 (Elastic properties of addition silicone interocclusal recording materials)

  • 이영옥;김경남
    • 한국치위생학회지
    • /
    • 제12권3호
    • /
    • pp.513-520
    • /
    • 2012
  • Objectives : In this study, contact angle and shore D hardness were measured, and a shark fin test was conducted after selecting five addition silicon(Blu-Mousse, BM; EXABITE II, EX; PERFECT, PF; Regisil$^{(R)}$ Rigid, RE; Silagum$^{(R)}$, SI) in order to figure out the properties of elastomeric interocclusal recording materials and reduce errors at interocclusal recording. 8) Methods : A contact angle was measured using a contact angle analyzer. After placing a drop of liquid on the surface of the specimens of interocclusal recording materials, a contact angle was photographed with a CCD camera on the equipment. In terms of a shark fin test, interocclusal recording materials were mixed for the time proposed by the manufacturer and inserted into the split ring of the Shark fin device. Twenty (20) seconds exactly, a metal rod was removed to make the materials slowly absorbed. Once they hardened, fin height was measured with a caliper after separating molds and trimming the specimens. The shore D hardness was measured with a shore D hardness tester(Model HPDSD, Hans Schmidt & Co. Gmbh, Germany) in sixty (60) minutes after fabricating specimens. In each experiment, five specimens, mean and standard deviation were calculated. A one-way ANOVA test was performed at the p>0.05 level of significance. In terms of correlation among the tests, Pearson correlation coefficient was estimated. For multiple comparison, Scheffe's test was carried out. Results : A contact angle was the highest in EX with $99.23^{\circ}$ (p<0.05) while the result of the shark fin test was the longest in RE with 5.45mm. SI was the lowest (0.27mm) with statistical significance. Among the interocclusal recording materials, significant difference was observed in terms of means (p<0.05). The shore D hardness was the highest in SI with 31.0 while RE was significantly low with 16.4 (p<0.05). Among the materials, statistically significant difference was observed in terms of means when compared to the rest materials (RE), BM, RE and SI (PF and EX) and the remaining materials (BM and SI) (p<0.05). In terms of correlations among the tests, a negative correlation occurred between shore D hardness and shark fin test(r=-0.823, p=0.000). Conclusions : According to the study above, it is necessary to understand the properties of interocclusal recording materials and consider contact angle, shark fin test and properties of shore D hardness to select appropriate materials.

수자원에 대한 기후변화 영향평가를 위한 고해상도 시나리오 생산(I): 유역별 기후시나리오 구축 (Generation of High Resolution Scenarios for Climate Change Impacts on Water Resources (I): Climate Scenarios on Each Sub-basins)

  • 배덕효;정일원;권원태
    • 한국수자원학회논문집
    • /
    • 제40권3호
    • /
    • pp.191-204
    • /
    • 2007
  • 본 연구에서는 기후변화가 국내 수자원에 미치는 영향을 평가하기 위해 고해상도($27km\;{\times}\;27km$)의 SRES A2 시나리오와 LARS-WG를 이용하여 국내 139개 소유역별 기후시나리오를 생산하였다. 본 연구에서 사용된 고해상도 시나리오는 약 350km 수평해상도의 ECHO-G 자료를 NCAR/PSU MM5를 이용하여 27km 수평해상도로 상세화한 것이다. A2 시나리오는 우리나라의 공간적 강수특성을 비교적 잘 모사하였으나, 한강과 금강유역의 강수량이 적게 모의되는 문제점을 보였다. 이러한 기후모형의 한계를 극복하고 유역스케일의 신뢰성 높은 기후시나리오를 생산하기 위해 일기상발생기인 LARS-WG를 선정하고 국내 기후모의에 대한 적요성을 평가하였다. LARS-WG를 이용한 기후모의 결과 월평균최대.최소기온과 월평균강수량은 관측치에 평균에서는 ${\pm}20%$, 표준편차에서는 ${\pm}50%$ 이내로 기후변화에 따른 수자원 영향평가의 목적으로 적용성이 높다고 판단되었다. 또한 LARS-WG를 이용하여 유역별 시나리오를 생산하고 관측치와 비교한 결과 기후모형에서 모의하지 못하는 지역적인 기후특성을 잘 반영하는 것으로 분석되었다.

진도견(珍島犬)의 혈액상(血液像) 및 혈액화학치(血液化學値)에 관(關)한 연구(硏究) 제삼보(第三報) 진도견(珍島犬)의 혈청전해질치(血淸電解質値) (Studies on Hematologic Values and Blood Chemistry Values of Normal Jindo Dogs 3. Serum Electrolyte Values for Adult Jindo Dogs)

  • 박남용;임봉호;조성만
    • 대한수의학회지
    • /
    • 제20권2호
    • /
    • pp.175-178
    • /
    • 1980
  • Normal values of serum electrolytes were determined for adult 36 females and 18 males, 1 to 6 years old, of Jindo dogs. The mean values, standard deviation and rangEs of sodium, potassium, chloride, calcium and inorganic phosphorus were studied and data analyzed to determine whether differences existed between the values of female and those of male dogs. The results obtained in this study were as follows: 1. The mean value of serum sodium was $143{\pm}1.5mEq/liter$, ranged from 138mEq/liter to 152 mEq/liter. The mean values for the females and males were $144{\pm}2.0mEq/liter$ and $142{\pm}1.7mEq/liter$, respectively. They showed that the female dogs had a tendency toward higher values than the male dogs, but no significant sex-related differences were observed. 2. The mean value of serum potassium was $4.6{\pm}0.2mEq/liter$, ranged frem 3.5mEq/liter to 6.0mEq/liter. The mean values for the females and males were $4.7{\pm}0.4mEq/liter$ and $4.5{\pm}0.3mEq/liter$. They showed that the female dogs had a tendency toward higher values than the male dogs, but sex differences were not found to be significant. 3. The mean value of serum chloride was $103{\pm}3.0mEq/liter$ ranged from 95mEq/liter to 117mEq/liter. The mean values for the females and males were $103{\pm}3.2mEq/liter$ and $103{\pm}3.3mEq/liter$, no sex differences showed. 4. The mean value of serum calcium was $5.2{\pm}0.1mEq/liter$ ranged from 4.7mEq/liter to 5.8mEq/liter. The mean values for the females and males were $5.4{\pm}0.1mEq/liter$ and $5.2{\pm}0.09mEq/liter$ respectively, no significant sexd iffere-nces were observed. 5. The mean value of serum inorganic phosphorus was $4.3{\pm}0.7mg/100ml$, ranged from 2.5mg/100ml to 5.8mg/100ml. The mean values for the females and males were $4.3{\pm}0.9mg/100ml$ and $4.1{\pm}0.8mg/100ml$, respectively, no sex differences showed.

  • PDF

Traveling heater method에 의해 성장된 Bi2Te2.7Se0.3의 열전특성 (Thermoelectric properties of Bi2Te2.7Se0.3 grown by traveling heater method)

  • 노임준;현도빈;김진상
    • 한국결정성장학회지
    • /
    • 제25권4호
    • /
    • pp.135-139
    • /
    • 2015
  • 단결정 ingot 성장기술 중 하나인 traveling heater method(THM) 기술을 이용하여 n형 열전소재인 $Bi_2Te_3-Bi_2Se_3$ 고용체화합물을 성장하였다. 고용체 화합물내 $CdCl_2$$SbI_3$을 첨가하여 dopant의 영향을 확인하였고 각각의 dopant의 최적의 첨가량[$CdCl_2$ 0.1 wt%(Z: $2.73{\times}10^{-3}/K$), $SbI_3$ 0.05 wt%(Z: $2.29{\times}10^{-3}/K$)]을 확인하였다. THM 기술을 통해 성장된 ingot의 각 부위별 열전특성을 확인해 본 결과 주요 인자들의 표준편차가 낮은 매우 균질화된 특성을 보였다. 또한 $Bi_2Te_3-Bi_2Se_3$ 고용체화합물의 비등방성 지수와 dopant와의 관계를 확인하기 위하여 $90(Bi_2Te_3)10(Bi_2Se_3)$ 조성의 고용체화합물에 donor dopant로서 $CdCl_2$(0.05~0.1 wt%)을 첨가하여 dopant의 증가에 따른 비등방성 지수의 변화를 확인해본 결과 dopant가 증가함에 따라 비등방성 지수가 변하는 것을 확인하였고 이러한 비등방성 지수의 변화가 실제 열전성능에 크게 영향을 미치는 것을 확인하였다.

세관을 사용한 응축기에서 R-22의 대체냉매인 R-410A의 응축 열전달 특성 (Condensation Heat Transfer Characteristics of R-410A as an Alternative R-22 in the Condenser with Small Diameter Tubes)

  • 손창효
    • 청정기술
    • /
    • 제13권2호
    • /
    • pp.151-158
    • /
    • 2007
  • 프레온계 냉매의 지구온난화와 오존층파괴 문제로 인해 대체냉매로서 R-410A가 주목을 받고 있다. 이러한 대체냉매를 세관에 적용시킬 경우 효율을 향상시킬 뿐만 아니라 지구환경에 미치는 영향을 감소시키고, 대기를 청정하게 만드는 기술 및 방안으로 각광 받고 있다. 따라서 본 연구에서는 R-22의 대체냉매로 각광받고 있는 R-410A의 세관응축기 내에서의 응축열전달 특성에 대해 실험적으로 고찰하고자 하였다. 실험장치는 유동양식, 열전달, 압력강하 특성을 파악할 수 있도록 제작되었고, 주요 구성품은 냉매펌프, 증발기, 응축기(시험부), 사이트 글라스(가시화부), 압력탭, 측정장치 등이다. 시험부의 내관은 내경 3.36 mm와 5.35 mm인 수평평활 동관이다. 실험변수들의 범위로서 질량유속 $200{\sim}500\;kg/m^2s$이고, 열유속은 $1.0{\sim}2.4\;kW$이다. R-410A의 응축열전달 계수가 R-22에 비해 최대 5% 정도 높은 것을 알 수 있었다. 세관 내 R-410A와 R-22의 유동양식은 환상류 영역이 지배적으로 나타남을 관찰하였고, 건도가 0.2 이하인 영역에서는 성층류가 나타남을 확인할 수 있었다. 내경 3.36 mm의 압력강하가 내경 5.35 mm에 비해 $30{\sim}50%$정도 높았다. 종래의 응축 열전달 상관식과 실험데이터를 비교한 결과, Fujii의 상관식과 최대 40%이내에서 일치하였다.

  • PDF

오대산지진(M=4.8, '07. 1. 20)의 단층파열방향성 (Fault rupture directivity of Odaesan Earthquake (M=4.8, '07. 1. 20))

  • 연관희
    • 지구물리와물리탐사
    • /
    • 제11권2호
    • /
    • pp.137-147
    • /
    • 2008
  • 2007년 1월 20일 발생한 '오대산지진(M = 4.8)'의 특징적인 점은 근거리 지역 관측소인 DGY(기상청 대관령, 진앙거리 = 7 km)에서 기록된 비정상적으로 높은 PGA(최대지반가속도) 관측값(< 0.1 g)이다. 한편 DGY 관측소는 진앙지인근에 위치한 매우 양호한 지진관측소(연관희와 서정희, 2007)로 분류되므로 지진파전달이나 부지증폭특성으로는 설명될 수 없으며, 고주파지진동에 큰 영향을 주는 지진원 특성인 단층파열방향성(rupture directivity)에 의한 것으로 예비 해석될 수 있다. 이 연구에서는 Boatwright (2007)의 방법을 이용하여 단층파열속도(v)의 전단파속도(c)에 대한 상대적 비(= v/c) 및 파열진행방향과의 이격각(${\theta}$, deviation angle)에 대한 함수로 주어지는 일방향 단층파열방향성(unilateral rupture directivity)을 추정하였다. 이러한 단층파열방향성을 평가하기 위해 진앙지 인근 지역의 지진관측소에 대한 점지진원 스펙트럼 모델(Boore, 2003)에 대한 예측오차를 오대산지진의 전 여진 관측자료을 이용하여 계산한 후, 본진 관측자료를 이용한 예측오차와 상대적으로 비교하였다. 본진의 전 여진에 대한 상대적인 스펙트럼 예측오차로부터 관측소별 PGA의 상대적인 크기를 추정하고 이 결과를 이용하여 오대산지진의 단층파열 방향성을 평가한 결과, 오대산지진 인근에서의 높은 PGA 관측값은 NWW-SEE 방향의 북측으로 고각을 갖는 단층면상에서 SE 방향을 따라 거의 수직하게 지표면으로 빠르게 진행된 단층파열의 영향으로 해석되었다.

여름철 제주 남부해역에서 내부 조석에 의한 음파 전달손실의 시간적 변화 모의실험 (Simulation of Temporal Variation of Acoustic Transmission Loss by Internal Tide in the Southern Sea of Jeju Island in Summer)

  • 김주호;김한수;팽동국;방익찬
    • 한국음향학회지
    • /
    • 제34권1호
    • /
    • pp.12-19
    • /
    • 2015
  • 여름철 제주 남부해역에서 내부조석에 의한 음향특성 변화를 실측 자료와 모의실험을 통해 연구하였다. 이를위해 서귀포 인근 해역의 수심 80 m 내외인 두 정점에서 2009년 7월 27일과 28일에 걸쳐 25시간동안 한 시간 간격으로 수심별 수온을 측정하였다. 그 결과 조석에 의해 해수 상층부의 등수온선이 약 10 m이상 반일주기로 변하는 현상이 관측되었다. 이로 인한 음파전달손실의 시간적 변화를 확인하기 위해 음원을 수심 10 m에 두고 거리 3.8 km 떨어진 두 관측 정점 사이에서 음파전달을 모의하였다. 중심주파수 100 Hz인 1/3 옥타브 밴드의 경우 특정 수심 및 거리에서 반일주기가 지배적 이었으나 1 kHz의 경우는 반일주기 성분이 거의 나타나지 않고 복잡한 변화를 보였다. 음원에서 거리 2.8 km떨어진 지점에서 시간에 따른 전달손실 변화의 표준편차는 중심주파수 100 Hz의 경우 수심에 따라 최대 4.2 dB 였으며, 1 kHz의 경우 최대 3.7 dB인 것으로 나타났다. 탐지성능 60 dB를 고려한 탐지거리를 분석한 결과 두 중심주파수 경우 모두 반일주기 변화가 나타났으며 최대 1.0 km 미만의 변화를 나타냈다. 이러한 결과는 차후 제주 남부해역의 음향 특성 실험 및 연구 수행 시 전달손실의 시변동성에 대해 고려할 필요가 있음을 시사한다.

시뮬레이션을 이용한 외부 베네시안 블라인드의 약식 SHGC 계산법 개발 (The Development of the Simple SHGC Calculation Method in Case of a Exterior Venetian Blind Using the Simulation)

  • 엄재용;이충국;장월상;최원기
    • 한국태양에너지학회 논문집
    • /
    • 제35권2호
    • /
    • pp.73-83
    • /
    • 2015
  • When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.

공간통계기법을 이용한 전국 일 최고/최저기온 공간변이의 추정 (Estimation of Daily Maximum/Minimum Temperature Distribution over the Korean Peninsula by Using Spatial Statistical Technique)

  • 신만용;윤일진;서애숙
    • 대한원격탐사학회지
    • /
    • 제15권1호
    • /
    • pp.9-20
    • /
    • 1999
  • 농업을 비롯한 산업활동을 효율적으로 수행하기 위해서는 전문 기상정보의 활용이 필수적이다. 영농활동에 있어서 의사지원시스템의 핵심으로 떠오르고 있는 작물 생장모형은 부단히 변화하는 대기환경에 대한 공간정보를 요구하기 때문에, 모형의 실용화를 위해서는 기상 관측밀도가 낮은 광범위한 작물 생육지역을 대상으로 일별 기상요소에 대한 공간분포를 추정해야 한다. 이러한 취지에서 본 연구는 미관측 지점을 포함하는 우리 나라 전국을 대상으로 작물모형의 구동에 필요한 최소 기상요소들 중에서 일 최고 및 일 최저기온의 공간적인 분포를 추정하고 그 추정 정도를 검증하고자 하였다. 이를 이해 먼저 58개 지점의 23년간 실측 기온자료로부터 지형기후학적 방법에 의하여 격자단위의 월별 기온평년값을 추정하고, 조화해석법에 의하여 일별값으로 변환하였다. 66개 기상청 관측소에서 수집된 임의 날짜의 최고/최저기온값과 관측소 해당 격자점의 평년값간 편차를 구한 다음, 미관측 격자점을 포함하는 한반도 전역의 기온편차를 거리역산가중법에 의하여 내삽.추정하였다. 각 격자점의 최종적인 기온 추정값은 기온 평년값에 이 편차를 더함으로써 얻었다. 얻어진 온도 분포는 위성자료로부터 추정한 지표온도분포 양상과 크게 다르지 않았다. 300여개의 자동기상관측 장비들로부터 수집된 자료와 비교한 결과, 추정오차는 $1.5^{\circ}C$~2.5$^{\circ}C$였다.