• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2338-2356
• /
• 2013

In cognitive radio networks, acquiring the position information of the primary user is critical to the communication of the secondary user. Localization of primary users can help improve the efficiency with which the spectrum is reused, because the information can be used to avoid harmful interference to the network while simultaneity is exploited to improve the spectrum utilization. Despite its inherent inaccuracy, received signal strength based on range has been used as the standard tool for distance measurements in the location detection process. Most previous works have employed the path-loss propagation model with a fixed value of the path loss exponent. However, in actual environments, the path loss exponent for each channel is different. Moreover, due to the complexity of the radio channel, when the number of channel increases, a larger number of RSS measurements are needed, and this results in additional energy consumption. In this paper, to overcome this problem, we propose using the Bayesian compressive sensing method with a calibrated path loss exponent to improve the performance of the PU localization method.

• KIEAE Journal
• /
• v.10 no.3
• /
• pp.51-56
• /
• 2010

The sound insulation performance is one of the important factor that determined the amenity of housing life in residential building. Especially, Apartment house represents a korea habitation. So the importance of privacy and noise problems between habitable rooms are emphasized in these habitation. This study investigates and find a problem of sound insulation performance of partition wall of the apartment house in current state. The measurements were carried out in apartment house with and without a stair hall. And the measurements also carried out in current state and installing a sound absorbing material in receiving room and changing a front door and installing a inner door. In spite of the same partition wall, difference results were showed according to the stair hall. It is appeared that sound insulation performance without stair hall is 6-7dB(Dw) higher than that with stair hall. In case of without stair hall, sound insulation performance is Dw 49 for single number quantity for airbone sound. And In case of changing a front door and installing a inner door sound insulation performance is Dw 57 for single number quantity for airbone sound. The Results of measuring on the changes a front door and installed a inner door indicated that the flanking sound through front door influenced the sound insulation performance.

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.629-640
• /
• 2008

A new algorithm is proposed to determine optimal accelerometer locations (OAL) when a structure is identified by frequency domain system identification (SI) method. As a result, a guideline is presented for selecting OAL which can reflect modal response of a structure properly. The guideline is to provide a minimum number of necessary accelerometers with the variation in the number of measurable target modes. To determine OAL for SI applications effectively, the modal sensitivity effective independence distribution vector (MS-EIDV) is developed with the likelihood function of measurements. By maximizing the likelihood of the occurrence of the measurements relative to the predictions, Fisher Information Matrix (FIM) is derived as a function of mode shape sensitivity. This paper also proposes a statistical approach in determining the structural parameters with a presumed parameter error which reflects the epistemic paradox between the determination of OAL and the application of a SI scheme. Numerical simulations have been carried out to examine the proposed OAL algorithm. A two-span multi-girder bridge and a two-span truss bridge were used for the simulation studies. To overcome a rank deficiency frequently occurred in inverting a FIM, the singular value decomposition scheme has been applied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.382-389
• /
• 2000

The instantaneous and ensemble averaged flow characteristics of a round jet issuing normally into a crossflow was studied using a flow visualization technique and Particle Image Velocimetry measurements. Experiments were performed at a jet-to-crossflow velocity ratio, 3.3, and two Reynolds numbers, 1050 and 2100, based on crossflow velocity and jet diameter. Instantaneous laser tomographic images of the vertical center plane of the crossflow jet showed that there exist very different natures in the flow structures of the near field jet even though the velocity ratio is the same. It was found that the shear layer becomes much thicker when the Reynolds number is 2100 due to the strong entrainment of the inviscid fluid by turbulent interaction between the jet and crossflow. The mean and second order statistics were calculated by ensemble averaging over 1000 realizations of instantaneous velocity fields. The detail characteristics of mean flow field, stream wise and vertical r.m.s. velocity fluctuations, and Reynolds shear stress distributions were presented. The new PlV results were compared with those from previous experimental and LES studies.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.76-85
• /
• 2017

Wall pressure measurements and flow visualization were conducted for a 90 degree elbow with an axis curvature radius the same as its inner diameter (125 mm). Reynolds numbers 320,000 and 500,000, based on the inner diameter and bulk velocity, were examined. A deflected inflow, having an almost constant velocity slope and a faster velocity at the inside, was introduced. Ensemble averaged pressure distributions showed that no difference of normalized pressure could be found in both the Reynolds number cases. Power spectral density functions of pressures exhibited that the fluctuation having the Strouhal number (based on the inner diameter and bulk velocity) of 0.6 existed in the downstream region of the elbow, which was 0.1 larger than that of the uniform inflow case [1]. Results of numerical calculations qualitatively coincided with the experimental ones.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.1
• /
• pp.80-89
• /
• 2021

In Korea, marine fish landed at ports are randomly sampled on a periodic basis (e.g., daily or weekly), and body sizes (e.g., lengths and weights) of those sampled fish are measured. The motivation for our study is whether or not such measurements reflect the size distribution, especially the length distribution of fish landed (= a population), because such length measurements are key data for a length-based assessment model. The current sampling method is to sample fish landed at ports by body size group (e.g., very small, small, medium, large, very large), using the sampling weights as the number of boxes by body size group. In this study, we showed that length composition data about fish sampled by the current method did not represent the length frequency distribution of the fish landed, and suggested that an alternative sampling method should be applied of using the sampling weights as the number of fish landed by body size group. We also introduced a method for determining an appropriate sample size.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.11-16
• /
• 2008

Confocal scanning microscopy is a widely used technique for three dimensional measurements because it is characterized by high resolution, high SNR and depth discrimination. Generally an image is generated by moving one optical probe that satisfies the confocal condition on the specimen. Measurement speed is limited by movement speed of the optical probe; scanning speed. To improve measurement speed we increase the number of optical probes. Specimen region to scan is divided by optical probes. Multi-point information each optical probe points to can be obtained simultaneously. Therefore image acquisition speed is increased in proportion to the number of optical probes. And multiple optical probes from red, green and blue laser sources can be used for color imaging and image quality, i.e., contrast, is improved by adding color information by this way. To conclude, this technique contributes to the improvement of measurement speed and image quality.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1629-1634
• /
• 2020

It is essential to convert the Digital Number (DN) measured from Earth observing satellites into the physical parameter of radiance when deriving the geophysical parameter such as surface temperature in the satellite data processing. The purpose of this study is to update the DN·Radiance equation established from lab measurements, using the KOMPSAT-3A mid-wave infrared data and the MODTRAN radiative transfer model. Results of this study show that the improved DN·Radiance equation allows us to produce the realistic values of radiance. We expect in the forthcoming study that the radiances calculated as such should be more quantitatively validated with the use of relevant in-situ measurements and a radiative transfer model.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.4
• /
• pp.450-459
• /
• 2007

This study was performed to assess the relationships between bone mineral density(BMD), anthropometric measurements, and maternal factors in postmenopausal women. The anthropometric measurements were taken by a trained practitioner, and the maternal factors of the 85 subjects in Chungnam were acquired by an interview questionaire. The BMDs of the lumbar $spines(L_2-L_4)$, femoral necks(FN), ward's triangles(WT), and trochanters(TR) were measured by dual energy X-ray absorptiometry(DEXA). The BMDs(T-score) for $L_2-L_4$, FN, and WT were 0.996 $g/cm^2$(-1.601), 0.697 $g/cm^2(-1.657)$, and 0.793 $g/cm^2(-1.512)$ respectively, which were assessed as osteopenia by the T-score ; TR was noma1 at 0.718 $g/cm^2(-0.675)$. The 85 subjects in Chungnam were divided into three groups according to their BMD measurements for $L_2-L_4$ and FN, assessed by the T-score. The percentages in the osteoporosis, osteopenia, and normal groups were 32.9%, 42.4, and 24.7%, respectively. The average age was significantly the highest in the osteoporosis group than in the other two osteopenia and normal group(p<0.001). The subjects' BMDs were positively correlated with weight, height, BMI, waist, WHR, OBR and hip circumference, and negatively correlated with the age, duration time after menopause, lactation, the age of last delivery, menarche age, and number of children. The average age at menopause was 48.8. The osteoporosis group's average age at menopause was lower than those of the other groups. However, the BMD of the lumbar spine positively correlated with duration time after menopause and the BMD of the femoral neck with lactation, last delivery, menarch age, number of children. Therefore, researches are needed to find out the effective way to minimize the effect of age and other physiological conditions on the decrease of bone mass density.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.526-534
• /
• 2019

Localization methods using radio signals should obtain range measurements from three or more anchors. However, a typical building consists of narrow, long hallways and corners, making it difficult to secure more than three light of sight anchors. The result is a multi-modal solution that makes it difficult to estimate the user's location. In order to overcome this problem, this paper proposes a method for estimating the location using artificial neural networks. Using the artificial neural network, even if a multi-modal solution occurs, the position can be estimated by acquiring user movement pattern information based on accumulated range measurements. The method does not require any additional equipment or sensors, and only anchor-based range measurements can estimate the user's location. In order to verify the proposed method, location estimation tests were performed in situations where the multi-modal solution occurred by installing an insufficient number of anchors in a building. As a result, it was confirmed that the location can be estimated even when the number of anchors is insufficient.