• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.1-6
• /
• 2010

Short-range wireless communication systems are expanding at rapid rate, finding application in offices and homes. Development of wireless local network is accompanied by steady increase in the demand for ever higher data rates. This in turn entails the necessity to develop communication systems which operate at higher frequencies. It can be expected that short-rage wireless communication networks will soon push towards the THz frequency range. We use a 3D ray-launching for analysis of propagation environments at the indoor fixtures. We extended the approach from the modeling of the reflectivity of optically thick, smooth building materials at THz frequencies to materials with a rough surface. The simulation result of propagation environment is similar to average received power of reference paper. The RMS delay spread was calculated to be 9.11 ns in a room size of $6m(L){\times}5m(W){\times}2.5m(H)$ for the concrete plaster.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.9-16
• /
• 2011

Most of the current mobility management protocols such as MIPv4/6 and its variants standardized by the IETF do not support global seamless handover. This is because they require comprehensive changes of the existing network infrastructure. In this article, we propose a simple mobility management protocol (SMMP) which can support global seamless handover between homogeneous or heterogeneous wireless networks. The idea is that the SMMP employs separate location management function as done in SIP to support global user and service mobility. In addition, the bidirectional tunnels are dynamically constructed to support seamless IP mobility by extending the IEEE 802.21 MIH standards. The detailed architecture and functions of the SMMP have been designed. Finally, the simulation results, using NS-2, show that the proposed SMMP outperforms the existing MIPv6 and HMIPv6 in terms of handover latency, packet loss, pear signal noise ratio (PSNR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.858-870
• /
• 2007

TCP is popular protocol for reliable data delivery in the Internet. In recent years, wireless environments with transmission errors are becoming more common. Therefore, there is significant interest in using TCP over wireless links. Previous works have shown that, unless the protocol is modified, TCP may perform poorly on paths that include a wireless link subject to transmission errors. The reason for this is the implicit assumption in TCP that all packet losses are due to congestion which causes unnecessary reduction of transmission rate when the cause of packet losses are wireless transmission errors. In this paper, we propose a new LDA that monitors the network congestion level using ROTT. And we evaluate the performance of our scheme and compare with TCP Veno, Spike scheme with NS2(Network Simulator 2). In the result of our experiment, our scheme reduces the packet loss misclassification to maximum 55% of other schemes. And the results of another simulation show that our scheme raise its transmission rate with the fairness preserved.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.1-6
• /
• 2005

This paper proposes a high performance multiplier using CMOS multiple-valued logic circuits. The multiplier based on the Modified Baugh-Wooley algorithm is designed with current-mode CMOS quaternary logic circuits. The multiplier is functionally partitioned into the following major sections: partial product generator block(binary-quaternary logic conversion block), current-mode quaternary logic full-adder block, and quaternary-binary logic conversion block. The proposed multiplier has 4.5ns of propagation delay and 6.1mW of power consumption. This multiplier can easily adapted to the binary system by the encoder and the decoder. This circuit is designed with 0.35um standard CMOS process at 3.3V supply voltage and 5uA unit current. The validity and effectiveness are verified through the HSPICE simulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.55-60
• /
• 2011

Most of neural network chips use an analog-type maximum selector circuit (MS). As the increase of integration level, the analog MS has difficulties in achieving sufficient resolution. Contrary, the digital-type MS is easy to get high resolution but slower than its analog counterparts. A new high-speed digital MS circuit called MSIT (Maximum Selector with Internal Trigger-signal) is presented in this paper. The MSIT has been designed to achieves both the high reliability by using trigger-signals and high speed by removing the unnecessary waiting times. The response time of MSIT is 3.4ns for 32 data with 10-bit resolution in the simulation with 1.2V, $0.13{\mu}m$-process model parameters, which is much faster than its analog counterparts. It shows that digital MS circuits like MSIT can achieve higher speed as well as higher resolution than analog MS circuits.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.236-244
• /
• 2017

In this study, the high-velocity impact penetration behavior of $[45/0/-45/90]_{ns}$ carbon/epoxy composite laminates was studied. The considered configuration includes a spherical steel ball impacting clamped circular laminates with various thicknesses and diameters. First, the impact experiment was performed to measure residual velocity and extent of damage. Next, the impact experiment was numerically simulated through finite element analysis using LS-dyna. Three-dimensional solid elements were used to model each ply of the laminates discretely, and progressive material failure was modeled using MAT162. The result indicated that the finite element simulation yielded residual velocities and damage modes well-matched with those obtained from the experiment. It was found that fiber damage was localized near the impactor penetration path, while matrix and delamination damage were much more spread out with the damage mode showing a dependency on the orientation angles and ply locations. The ballistic-limit velocities obtained by fitting the residual velocities increased almost linearly versus the laminate diameter, but the amount of increase was small, showing that the impact energy was absorbed mostly by the localized impact damage and that the influence of the laminate size was not significant at high-velocity impact.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.48-55
• /
• 2008

We have simulated the performance of a simple engine model with a gas turbine engine simulation program based on CFD. 2-dimensional Navier-Stokes code for the viscous flow was applied to simulate a compressor and a turbine, and the chemical equilibrium code with the lumped method was applied to simulate the combustor. Unsteady-flow phenomenon between rotor and stator of the compressor and the turbine was analyzed by steady mixing-plane method. In this way, the influence of the turbine blade pitch on the engine was investigated. It was shown that the compressor is operated at more higher pressure conditions as narrower the pitch distance of the turbine.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.216-226
• /
• 2008

This paper proposes a novel transport network architecture for the next generation network (NGN) based on the optical burst switching technology. The proposed architecture aims to provide efficient delivery of various types of network traffic by satisfying their quality-of-service constraints. To this end, we have developed a soft-state bandwidth reservation mechanism, which enables NGN transport nodes to dynamically reserve bandwidth needed for active data burst flows. The performance of the proposed mechanism is evaluated by means of numerical analysis and NS2 simulation. Our results show that the packet delay is kept within the constraint for each traffic flow and the burst loss rate is remarkably improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.208-213
• /
• 2003

Recently, a variety of new routing protocols targeted specifically wireless mobile nodes environment have been developed. This paper presents the results of a detailed packet level simulation comparing two multi-hop wireless ad-hoc network routing protocols that cover a range of design choices between DSDV and DSR. And we suggest a performance comparison of network routing protocols through NS-2 simulator.

• IE interfaces
• /
• v.23 no.2
• /
• pp.193-202
• /
• 2010

The quality of service(QoS) model should be presented with the optimal network design to effectively provide the multimedia data services between users and converged services with mobile or TV in the next-generation Internet. In specific, the method to provide differentiated services for each user is needed in the given Internet node to offer the previously negotiated QoS with the user. In this paper, the performance of the QoS enabling technologies in the differentiated services(DiffServ) network domain is analyzed. The QoS offering model and QoS metrics are presented to analyze the performance of the major scheduling algorithms. Under the real network topology and virtual service scenarios in the university, the NS-2 network simulation based on the discrete-event is performed. The results show that the ratio-based scheduling method is more effective rather than the bandwidth-assignment method.