• 제목/요약/키워드: normal matrix

검색결과 781건 처리시간 0.031초

NEW RESULT CONCERNING MEAN SQUARE EXPONENTIAL STABILITY OF UNCERTAIN STOCHASTIC DELAYED HOPFIELD NEURAL NETWORKS

  • Bai, Chuanzhi
    • 대한수학회보
    • /
    • 제48권4호
    • /
    • pp.725-736
    • /
    • 2011
  • By using the Lyapunov functional method, stochastic analysis, and LMI (linear matrix inequality) approach, the mean square exponential stability of an equilibrium solution of uncertain stochastic Hopfield neural networks with delayed is presented. The proposed result generalizes and improves previous work. An illustrative example is also given to demonstrate the effectiveness of the proposed result.

Fabrication and Characterization of Alumina Matrix Composites Reinforced with SiC whiskers

  • Han, Byung-Dong;Park, Dong-Soo
    • The Korean Journal of Ceramics
    • /
    • 제5권1호
    • /
    • pp.12-18
    • /
    • 1999
  • Alumina matrix composites reinforced with up to 20vol% of aligned SiC whiskers were fabricated by tape casting and hot pressing. Alumina composited with randomly distribution SiC whiskers were also fabricated in order to investigate the effect of whisker alignment on properties of the composites. XRD and optical microscopy were used to examine the whisker orientation. The fracture toughness increased with increasing whisker content, and it was higher in the direction normal to the tape casting direction.

  • PDF

최적제어 기법을 이용한 위성의 자세제어 (Satellite Attitude Control Using Optimal Control Law)

  • 양재윤;박수홍;조겸래
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.395-400
    • /
    • 1991
  • In spinning satellite, a gyrotorquer generates a control torquer along two orthogonal axes normal to the spin axis of the vehicle. Matrix Fraction Description(MFD) are used to obtain minimal realization of the transfer matrix relating the attitude angles and the rate of rotation of the gimbals of gyrotorquer. In this paper, the Linear Quadratic Gaussian with Loop Transfer Recovery and H.meihodologies are used to design controller for spinning satellite.

  • PDF

STRONGLY NIL CLEAN MATRICES OVER R[x]/(x2-1)

  • Chen, Huanyin
    • 대한수학회보
    • /
    • 제49권3호
    • /
    • pp.589-599
    • /
    • 2012
  • An element of a ring is called strongly nil clean provided that it can be written as the sum of an idempotent and a nilpotent element that commute. We characterize, in this article, the strongly nil cleanness of $2{\times}2$ and $3{\times}3$ matrices over $R[x]/(x^2-1)$ where $R$ is a commutative local ring with characteristic 2. Matrix decompositions over fields are derived as special cases.

SOLVATOCHROMIC BEHAVIOUR OF DONOR-ACCEPTOR SUBSTITUTED 1,2-DIPHENYLETHENES IN ORGANIC SOLVENTS, REVERSE MICELLES AND POLYMER MATRIX

  • Singh, A.K.;Mahalaxmi, G.R.;Malimath, G.H.
    • Journal of Photoscience
    • /
    • 제4권2호
    • /
    • pp.53-59
    • /
    • 1997
  • Absorption and fluorescence studies of E-1-(p-methoxyphenyl)-2-(p-nitrophenyl) ethene in homogeneous solvents, polymer matrix and normal and reverse micelles showing strong solvatochromic fluorescent emission properties with quasi-planar intramolecular charge transfer characteristics in the electronically excited singlet state are discussed.

  • PDF

Mechanical Properties and Microstructures in WC-12%Co/Low Carbon Steel Metal Matrix Composites(MMC) Welding Overlay

  • 임희식;김태형;박경채
    • Journal of Welding and Joining
    • /
    • 제21권2호
    • /
    • pp.50-56
    • /
    • 2003
  • Metal matrix composites(MMC) consist of metal matrix into which is distributed a second solid phase. The normal intension is to develop a material with superior mechanical properties (for example increased toughness, stiffness and wear resistance) compared to those inherent in the matrix component. In this study, WC-12%Co/low carbon steel MMC overlays have been prepared by Gas Metal Arc Welding(GMAW) according to feeding rate of WC-12%Co grit. The macro and microstructures were examined using optical microscopy (OM) and scanning electron microscopy(SEM) each other. The characteristics of hardness and wear resistance have been investigated. WC-12%Co/low carbon steel MMC overlays which have been taken good beads without porosity and cracks were manufactured by method of GMAW. Matrix of overlayed surface was seen as fish bone and faceted dendrite structures. It was known that structures were iron tungsten carbides, Fe$_{6}$W$_{6}$C which have been occurred by melting of WC-12%Co grits. After MMC had been tested by block-roll wear test it was known that WC-12%Co/low carbon steel MMC has a excellent wear resistance by exiting Fe6w6c and WC-12%Co grit. The consequence was that region of overlay with Fe$_{6}$W$_{6}$C phase has been showed a model of adhesive wear, but region of overlay with WC-12%Co grit was restrained as a result of mechanism that wear of WC-12%Co grit is not adhesive but fracture.racture.

유방 초음파 영상에서 질감 특성을 이용한 악성종양 분석 (Analysis of Malignant Tumor Using Texture Characteristics in Breast Ultrasonography)

  • 조진영;예수영
    • 융합신호처리학회논문지
    • /
    • 제20권2호
    • /
    • pp.70-77
    • /
    • 2019
  • 조기 유방암을 진단하기 위해서는 유방초음파 판독이 매우 중요하다. 초음파 검사는 초음파장비에 따라 화질의 차이가 심하게 나타날 뿐만 아니라 검사자의 경험과 숙련 정도에 따라 진단의 차이가 크게 나타난다. 따라서 정확한 진단과 치료를 위하여 객관적인 판단기준이 필요하다. 이에 본 연구에서는 GLCM(Gray Level Co-occurrence Matrix) 알고리듬을 적용하여 질감 특성을 분석하고 특징파라미터들을 추출하여 신경망분류기를 이용하여 유방암을 진단하였다. 유방초음파 영상은 정상 조직과 양성, 악성 종양으로 분류하여 질감 특성 파라미터 6가지를 추출하였다. 유방초음파검사로 진단된 정상 영상, 악성 및 양성종양 영상 각각 14증례를 대상으로 추출된 6개의 파라미터들을 적용하여 다층 퍼셉트론 신경망구조 역전파 학습방법으로 학습을 시켰다. 학습된 모델에 정상 유방 영상 51증례, 양성종양 영상 62증례, 악성종양 영상 74증례의 영상을 사용하여 분류한 결과 95.2%의 분류율을 나타내었다.

절리거동의 탄소성해석에서 소성유동법칙의 역할 (The Role of the Plastic Flow Rules in the Elasto-Plastic Formulation of Joint behaviour)

  • 이연규
    • 터널과지하공간
    • /
    • 제10권2호
    • /
    • pp.173-179
    • /
    • 2000
  • 절리면의 전단거동에서 나타나는 응력 및 변위의 비선형 특성을 탄소성해석에 의해 모사하는 경우 소성유동법칙이 해석결과에 미치는 영향을 검토하였다. Plesha의 절리구성모델을 적용하여 일정수직응력조건과 일정수직변위조건에서 수치직접전단시험을 실시하였다. 연상유동법칙을 적용하면 과도한 수직팽창이 예측되는 반면에 비연상유동법칙을 적용한 해석은 실제 절리거동을 잘 모사하고 있음을 보였다. 비연상유동법칙의 적용으로 강성행렬이 비대칭이 피는 단점을 보완하기 위해 비연상유동법칙을 적용하는 경우라도 요소의 접선강성행렬을 대칭화시키는 수치해석 기법이 제안되었다. 본래의 절리면과 동일한 소성변형을 일으키지만 연상유동법칙을 따르는 등가의 절리면을 가정함으로써 대칭인 탄소성행렬을 유도하였다. 일정수직음력조건에서 수티 직접전단시험을 실시하여 제안된 강성행렬 대칭화 기법의 유효성을 검증하였다.

  • PDF

18F-FDG Brain PET/CT 검사를 위한 데이터 비교 방법의 평가 (Evaluation of Database Comparison Methods for 18F-FDG Brain PET/CT)

  • 도용호;이홍재;김진의
    • 핵의학기술
    • /
    • 제19권1호
    • /
    • pp.62-66
    • /
    • 2015
  • Brain PET/CT 검사는 뇌의 정신활동 뿐만 아니라 혈액의 관류상태, 에너지원의 대사상태, 생리적 활성물질의 섭취 정도를 관찰할 수 있으며 이를 통계적으로 분석하기 위한 다양한 데이터 비교 방법들이 적용되고 있다. 본 논문에서는 다양한 데이터 비교 방법들 중 SPM과 scenium의 유용성을 비교 평가 하였다. 2014년 3월부터 7월까지 서울대학교병원에서 18F-FDG PET/CT 검사를 시행 받은 15명(평균연령 $62.02{\pm}15.03$세, abnormal 10명, normal 5명)의 데이터를 분석하였다. 사용된 장비는 Siemens사의 Biograph Truepoint40 with TrueV이며 데이터 분석을 위하여 SPM99, syngo.via version VA30A, scenium version 4.0이 사용되었다. 검사는 $^{18}F-FDG$를 kg당 3.7MBq 주사하여 30분 후 brain emission 영상을 10분 획득하였다. 획득된 영상을 이용하여 영상 판독과 SPM, scenium 결과의 일치성을 5명의 핵의학과 판독의가 평가하였다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화를 평가하기 위하여 환자 data 재구성시 iteration 4, 6, 8, gaussian filter 2mm, 4mm, 8mm, matrix size 168, 256, 336의 변화를 주어 재구성후 증감을 평가하였다. 마지막으로 3명의 방사선사가 두 software를 이용하여 평균 결과 분석 시간을 평가하였다. 영상 판독과 SPM 결과의 일치성은 normal 89.5%, abnormal 73.2%로 normal 환자에서 보다 높은 일치성을 보였으며 total 84.1%의 일치하는 것으로 나타났다. Scenium에서는 normal 92.1%, abnormal 93.0% 그리고 total 92.4%로 나타났다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화 평가에서 iteration 횟수와 matrix size가 감소할수록 SUV와 SD 값은 iteration 변화에서 최대 0.59%, 8.73% 그리고 matrix size 변화에서 최대 0.88%, 8.25% 감소하였다. Gaussian filter변화에서는 FWHM이 증가할수록 SUV와 SD값은 최대 4.69%, 20.38% 감소하였다. 두 software를 이용한 평균 결과 분석 시간은 SPM 282초, scenium 116초로 scenium으로 결과 분석 시 SPM 사용 시 보다 58.% 시간이 감소되었다. 데이터 비교 평가 software들의 장단점을 충분히 이해하고 각 병원의 장비 환경과 실정에 맞는 software를 적용한다면 brain PET/CT 검사 시 보다 많은 정보를 제공할 수 있을 것으로 사료된다.

  • PDF

뇨중 연 분석의 정확성 및 정밀성에 미치는 최적 전처리법 (Accuracy and Precision according to Optimal Preparation by Analysis of Urine Lead)

  • 장봉기;정은희;박종안;손부순;이종화
    • 환경위생공학
    • /
    • 제16권1호
    • /
    • pp.91-101
    • /
    • 2001
  • In order to propose a optimum method increasing accuracy and reproducibility in analysis of urine lead levels, we compared matrix modifier addition method and microwave digestion method. The results were as follows ; 1. Where the concentration of $Pd(NO_3)_2$(matrix modifier) was $50mg/{\ell}$, and ashing temperature was $900^{\circ}C$, the results were optimum. In case of matrix modifier addition method, the average coefficient of variation (CV) of normal man was 24.1%, and lead worker was 7.9%. The average urine lead levels of standard were $10.42\mu{g}/{\ell}$ and $19.89\mu{g}/{\ell}$ , the accuracies compared to reference values were 97.0% and 92.6%, respectively. 2. Microwave digestion temperature($160~180^{\circ}C$), time(15~25min) and the ratio of urine/ashing acid(1:1~4:1) did not significantly affect lead absorbance and background absorbance. Therefore we set up a optimum analytical conditions as follows: temperature, $160^{\circ}C$; time, 15min; the ratio of urine/ashing acid, 4:1. after samples were digested by the above analytical conditions, lead absorbance and background absorbance was measured at $450^{\circ}C$ as ashing temperature. The average coefficient of variation (CV) of normal man was 12.4%, and lead worker was 6.2%. The average urine lead levels of standard urine were $10.66\mu{g}/{\ell}$ and $23.31\mu{g}/{\ell}$, the accuracies compared to reference values were 99.3% and 103.9%, respectively. From the results, we suggest that microwave digestion method is a more favorable method than matrix modifier addition method because of easiness to reduce organic matter, possibility to analysis at low temperature and accuracy.

  • PDF