• Journal of the military operations research society of Korea
• /
• v.13 no.1
• /
• pp.91-100
• /
• 1987

This paper deals with an algorithm for solving nonlinear programming problems with equality constraints. Nonlinear programming problems are transformed into a square sums of nonlinear functions by the Lagrangian multiplier method. And an iteration method minimizing this square sums is suggested and then an algorithm is proposed. Also theoretical basis of the algorithm is presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.795-805
• /
• 2016

Nonlinear normal modes(NNMs) is a branch of periodic solution of nonlinear dynamic systems. Determination of stable periodic solution is very important in many engineering applications since the stable periodic solution can be an attractor of such nonlinear systems. Periodic solutions of nonlinear system are usually calculated by perturbation methods and numerical methods. In this study, numerical method is used in order to calculate the NNMs. Iteration of the solution is presented by multiple shooting method and continuation of solution is presented by pseudo-arclength continuation method. The stability of the NNMs is analyzed using Floquet multipliers, and bifurcation points are calculated using indirect method. Proposed analyses are applied to two nonlinear numerical models. In the first numerical model nonlinear spring-mass system is analyzed. In the second numerical model Jeffcott rotor system which has unstable equilibria is analyzed. Numerical simulation results show that the multiple shooting method can be applied to self excited system as well as the typical nonlinear system with stable equilibria.

• Journal of applied mathematics & informatics
• /
• v.29 no.3_4
• /
• pp.909-920
• /
• 2011

A regularized Newton method for nonlinear ill-posed problems is considered. In each Newton step an implicit iterative method with an appropriate stopping rule is proposed and analyzed. Under certain assumptions on the nonlinear operator, the convergence of the algorithm is proved and the algorithm is stable if the discrepancy principle is used to terminate the outer iteration. Numerical experiment shows the effectiveness of the method.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.81-86
• /
• 2002

This paper presents the full wave analysis of microwave circuits with nonlinear device using the finite difference time domain method. The equivalent current source is used to model nonlinear device and all the electric field components at the nonlinear device are updated by FDTD algorithm. The currents and voltages of nonlinear device are calculated by the state equations and iteration method. To validate the proposed method, the S-parameters of NEC NE72089 MESFET in various conditions are analyzed and the results are compared with those of the ADS. The proposed method is applied to the analysis of a microwave amplifier, which includes NEC NE72089 MESFET. The analysis results obtained by the present method show good agreement with those of the ADS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.327-332
• /
• 2003

A new discretization method for nonlinear system with time-delay is proposed. It is based on the well-known Taylor series expansion and the zero-order hold (ZOH) assumption. We know that a discretization of linear system can be obtained with the ZOH assumption and within the sampling interval. A similar line of thinking is available in nonlinear case. The mathematical structure of the new discretization method is explored and under the structure, the sampled-data representation of nonlinear system including time-delay is computed. Provided that the discrete form of the single input nonlinear system with time-delay is derived, this result is easily extended to nonlinear system with multi-input time-delay. For simplicity two inputs are considered in this study. It is enough to generalize that of multiple inputs. Finally, the time-discretization of non-affine nonlinear system with time-delay is investigated for apply all nonlinear system

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.675-677
• /
• 2004

This paper presents a nonlinear controller design for optical disk drive systems to improve anti-shock performance. The nonlinear anti-shock controller is added parallel to the original linear servo control loop. In the previous work, dead-zone nonlinear element is used for nonlinear controller and PID control method is used for linear controller. Although this strategy improves anti-shock performance, it has a narrow stability bound. In this paper, we propose dead-zone with saturation nonlinear element for the nonlinear controller. Since this nonlinear element improves stability margin, we can use higher gain of dead-zone than the controller with dead-zone only. In the linear controller design, we show that lead-lag control has improved stability margin over PID control. Numerical simulation results show that the proposed method can get better performance to the external shock than previously proposed method.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.406-418
• /
• 2020

In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

• Steel and Composite Structures
• /
• v.44 no.4
• /
• pp.557-567
• /
• 2022

Nonlinear free vibration analysis of a functionally graded beam resting on the nonlinear viscoelastic foundation is studied with uniform temperature rising. The non-linear strain-displacement relationship is considered in the finite strain theory. The governing nonlinear dynamic equation is derived based on the finite strain theory with using of Hamilton's principle. The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then is solved by using of multiple time scale method. The influences of temperature rising, material distribution parameter, nonlinear viscoelastic foundation parameters on the nonlinear free response and phase trajectory are investigated. In this paper, it is aimed that a contribution to the literature for nonlinear thermal vibration solutions of a functionally graded beam resting on the nonlinear viscoelastic foundation by using of multiple time scale method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.149-152
• /
• 1996

In this paper, the authors propose a new method for linearizing a nonlinear dynamical system by use of Volterra kernel of the nonlinear system. The authors have recently obtained a new method for measuring Volterra kernels of nonlinear control systems by use of a pseudo-random M-sequence and correlation technique. In this method, an M-sequence is applied to the nonlinear system and the crosscorrelation function between the input and the output gives us every crosssection of Volterra kernels up to 3rd order. Once we can get Volterra kernels of nonlinear system, we can construct a linearization method of the nonlinear system. Simulation results show good agreement between the observed results and the theoretical considerations.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.63-68
• /
• 2016

PURPOSES : The nonlinear model of fatigue cracking is typically used for determining the maintenance period. However, this requires that the model parameters be known. In this study, the particle filter (PF) method was used to determine various statistical parameters such as the mean and standard deviation values for the nonlinear model of fatigue cracking. METHODS : The PF method was used to determine various statistical parameters for the nonlinear model of fatigue cracking, such as the mean and standard deviation. RESULTS : On comparing the values obtained using the PF method and the least square (LS) method, it was found that PF method was suitable for determining the statistical parameters to be used in the nonlinear model of fatigue cracking. CONCLUSIONS : The values obtained using the PF method were as accurate as those obtained using the LS method. Furthermore, reliability design can be applied because the statistical parameters of mean and standard deviation can be obtained through the PF method.