• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.7-15
• /
• 1989

Gauss-Jacobi relaxation 方法으로부터 非線形 마이크로波 回路解析 알고리듬을 薄出하고, Harmonic Balance 技法을 應用하여 갈륨비소 쇼트키 障壁 다이오드를 이용한 混合器의 非線形 및 線形 回路解析 方法을 提示하였다. 本 硏究에서의 解析方法으로부터 마이크로波 混合器의 變換損失을 正確히 豫測하고, 컴퓨터 시뮬레이션으로부터 MMIC設計에 有用함을 보였다. 寬察로 Ku-밴드用 混合器를 MIC로 設計, 製作하여 시뮬레이션 結果의 妥當性을 立證하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.865-868
• /
• 1993

This paper describes a simple random signal generator employing by CMOS analog technology in current mode. The system is a nonlinear dynamical system described by a difference equation, such as x(t＋1) = f(x(t)) , t = 0,1,2, ... , where f($.$) is a nonlinear function of x(f). The tent map is used as a nonlinear function to produce the random signals with the uniform distribution. The prototype is implemented by using transistor array devices fabricated in a mass product line. It can be easily realized on a chip. Uniform randomness of the signal is examined by the serial correlation test and the $\chi$2 test.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1884-1893
• /
• 2016

The ride-through control of a doubly-fed induction generator (DFIG) for the voltage sags on wind farms utilizing crowbar circuits by which the rotor side converter (RSC) is disabled has being reported in many literatures. An analysis and calculation of the transient current when the RSC is switched off are of significance for carrying out the low voltage ride through (LVRT) of a DFIG. The mathematical derivation is highlighted in this paper. The zero-state and zero-input responses of the transient current in the frequency domain through a Laplace transformation are investigated, and the transient components in the time domain are achieved. With the characteristics worked out from the linear resolving without modeling simplification, the selection of the resistance in the linear crowbar circuit and the value conversion from a linear circuit to a nonlinear one is proposed to setup the attenuation rate. In terms of grid code requirements, the theoretical analysis for the time constant of the transient components attenuation insures the controllability when the excitation of the RSC is resumed and it guarantees the reserved time for the response of the reactive power compensation. Simulations are executed in MATLAB/SIMPOWER and experiments are carried out to validate the theoretical analysis. They indicate that the calculation method is effective for selection of the resistance in a crowbar circuit for LVRT operations.

• 대한전자공학회논문지SP
• /
• 제38권2호
• /
• pp.191-198
• /
• 2001

HD ProjectionTV에서 CRT의 전자총 및 투영되는 스크린 상에서의 빔 프로파일에 의한 화질의 열화를 개선시키기 위한 방법으로는 영상신호의 진폭 변화량에 따라 수평 편향 속도를 선형적으로 변조시키는 SVM(Scan Velocity Modulation)방식이 있다. 그런데, 선형 SVM방식에서의 화질 개선은 입력 영상신호의 진폭변화에 대해 균일하지 않다. 본 논문에서는 HD Projection TV에서의 빔 프로파일의 특성을 분석하여 모델링하고, 고역의 HD 신호가 입력될 때 SVM효과를 모의실험을 통해 해석하였다. 그리고, 이를 근거로 영상신호에 따라 SVM량을 비선형적으로 조절하는 비선형 SVM방식이 HD Projection TV에서도 필요함을 이론적으로 제시하였다. 이를 바탕으로 SVM 회로를 직접 하드웨어로 제작하여 실제 TV에 장착하여 실험하였다. 실험 결과 영상 신호의 진폭이 작은 영역과 큰 영역의 경계부분에서 발생하는 화질의 열화를 거의 일정하게 개선시킬 수 있음을 확인 하였다.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1131-1150
• /
• 2014

One of the issues in extending the range of applicable problems of real-time hybrid simulation is the computation speed of the simulator when large-scale computational models with a large number of DOF are used. In this study, functionality of real-time dynamic simulation of MDOF systems is achieved by creating a logic circuit that performs the step-by-step numerical time integration of the equations of motion of the system. The designed logic circuit can be implemented to an FPGA-based system; FPGA (Field Programmable Gate Array) allows large-scale parallel computing by implementing a number of arithmetic operators within the device. The operator splitting method is used as the numerical time integration scheme. The logic circuit consists of blocks of circuits that perform numerical arithmetic operations that appear in the integration scheme, including addition and multiplication of floating-point numbers, registers to store the intermediate data, and data busses connecting these elements to transmit various information including the floating-point numerical data among them. Case study on several types of linear and nonlinear MDOF system models shows that use of resource sharing in logic synthesis is crucial for effective application of FPGA to real-time dynamic simulation of structural response with time step interval of 1 ms.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.300-304
• /
• 2012

본 논문은 리튬 폴리머 배터리 셀의 잔존충전용량을 추정하기 위한 비선형 관측기의 설계방법을 제시한다. 배터리 셀의 동적방정식은 비선형 전압원을 갖는 간단한 RC 전기회로로 모델하고 파라메터는 비선형 최적화기법을 이용하여 구한다. 관측기 이득은 제곱합 분해기법을 사용하여 오차의 동적방정식이 점근적으로 안정하고 추정오차 감소율이 설계자가 지정한 값 이하가 되도록 설계한다. 관측기의 성능을 입증하기 위하여 UDDS 전류 프로파일을 사용한 실험 데이터를 이용하여 모의실험을 수행하였다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.99-106
• /
• 2005

In this study, the electromagnetic characteristics of a flat-type two-dimensional proportional solenoid were analyzed by the magnetic reluctance method. The equivalent magnetic circuit equation for the solenoid was derived by modeling the reluctance of air gaps and magnetic structural components such as pole core, armature and yoke. It was solved iteratively because of the nonlinear magnetization properties of the iron parts. The solutions showed good agreement with experimental data. Based on the equivalent magnetic circuit equation, the influence of design parameters on the force-to-armature displacement curves was mathematically derived and experimentally verified. In this way, dominant design parameters could be analytically determined.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권6호
• /
• pp.292-298
• /
• 2006

Because of the high cost for the active power filter, passive filters have been widly used to eliminate harmonic currents of nonlinear load and can also improve the power factor. They are not often optimal filters because the passive filters are designed under the fixed load conditions. In this paper we proposed the method which only the necessary harmonic filters are operated by detecting the various harmonic current components. We presents the new control method of passive filter selection type with the relay control circuit which is consist of analog GIC, comparater, flip-flop and etc. By the experimental results using the proposed system for the rectifier load, we concluded that the researched method is cost effective and the performance is better than the passive filter.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.18-23
• /
• 1991

Recently SLAMECKA suggested the mathematical dynamic arc model of the SF6 gas circuit breaker [1]. The author applied the above dynamic arc model to the E.H.V. transmission line and investigated the interrupting capability of the SF6 gas circuit breaker. In particular the Runge-Kutta-England numerical method suitable for the use in systems that involve nonlinear dynamic arc and traveling wave was used by converting the current source into the voltage source in the DOMMEL's method [2]. The successful computer resultls were obtained and it was found that the arc time constant and the second derivative of the arc conductance are closely related to the interrupting capability of the SF6 gas circuit breaker.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.227-230
• /
• 2000

Chuas circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chuas circuits are proposed and synchronizations of a equivalent wire and wireless power line are investigated. Since the synchronization of the equivalent wire and wireless system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the equivalent wire and wireless transmission system caused by the line parameters L and C.