• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.899-902
• /
• 1993

A neural model predictive control strategy combining a neural network for plant identification and a nonlinear programming algorithm for solving nonlinear control problems is proposed. A constrained nonlinear optimization approach using successive quadratic programming combined with neural identification network is used to generate the optimum control law for complex continuous chemical reactor systems that have inherent nonlinear dynamics. The neural model predictive controller (MNPC) shows good performances and robustness. To whom all correspondence should be addressed.

• Structural Engineering and Mechanics
• /
• v.30 no.5
• /
• pp.593-602
• /
• 2008

This paper presents a new linearization algorithm to find the periodic solutions of the Duffing equation, under harmonic loads. Since the Duffing equation models a single degree of freedom system with a cubic nonlinear term in the restoring force, finding its periodic solutions using classical harmonic balance (HB) approach requires numerical integration. The algorithm developed in this paper replaces the integrals appearing in the classical HB method with triangular matrices that are evaluated algebraically. The computational cost of using increased number of frequency components in the matrixbased linearization approach is much smaller than its integration-based counterpart. The algorithm is computationally efficient; it only takes a few iterations within the region of convergence. An example comparing the results of the linearization algorithm with the "exact" solutions from a 4th order Runge- Kutta method are presented. The accuracy and speed of the algorithm is compared to the classical HB method, and the limitations of the algorithm are discussed.

• Journal of applied mathematics & informatics
• /
• v.39 no.5_6
• /
• pp.859-882
• /
• 2021

In the proposed paper, a new algorithm based on Nonlinear Feedback Shift Register (NLFSR) and modified RC4A (Rivest Cipher 4A) cipher is introduced. NLFSR is used for image pixel scrambling while modified RC4A algorithm is used for pixel substitution. NLFSR used in this algorithm is of order 27 with maximum period 2^27-1 which was found using Field Programmable Gate Arrays (FPGA), a searching method. Modified RC4A algorithm is the modification of RC4A and is modified by introducing non-linear rotation operator in the Key Scheduling Algorithm (KSA) of RC4A cipher. Analysis of occlusion attack (up to 62.5% pixels), noise (salt and pepper, Poisson) attack and key sensitivity are performed to assess the concreteness of the proposed method. Also, some statistical and security analyses are evaluated on various images of different size to empirically assess the robustness of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.232-233
• /
• 2008

There are various large shocks in optical disc drive system like human touch and speak sound. In this paper, a nonlinear controller and a detection method are proposed. First, a relay nonlinear controller with dead zone is introduced. The structure of this nonlinear controller is simple and has a small amount of calculation. However, this controller has chattering problem when it is working. We suggest a disturbance detection algorithm using Kalman filter in this paper and it shows effective reduction of chattering. The proposed nonlinear controller using this detection algorithm had good performance for the shock.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1473-1476
• /
• 1997

This paper presents a scheme for continuous-time fuzzy modelling of nonlinear systems, based on the adjustment technique and the genetic algorithm technque. The fuzzy model is characterized by fuzzy "If-then" rules whcih represent locally linear input-output relations whose consequence part is defined as subsystem of a nonlinear system. To compute the final output and deal with the initialization and unmeasurable signal problems in on-line estimatio of the fuzzy model, a discrete-time model is obtaned. Then the parameters of both the premis and consequence of the fuzzy model are adjusted on-line by a genetic algorithm. A simulation work is carried out to demonstrate the effectiveness of the proposed method.ed method.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.1
• /
• pp.1-20
• /
• 2016

The general number field sieve (GNFS) is asymptotically the fastest known factoring algorithm. One of the most important steps of GNFS is to select a good polynomial pair. A standard way of polynomial selection (being used in factoring RSA challenge numbers) is to select a nonlinear polynomial for algebraic sieving and a linear polynomial for rational sieving. There is another method called a nonlinear method which selects two polynomials of the same degree greater than one. In this paper, we generalize Montgomery's method [12] using geometric progression (GP) (mod N) to construct a pair of nonlinear polynomials. We also introduce GP of length d + k with $1{\leq}k{\leq}d-1$ and show that we can construct polynomials of degree d having common root (mod N), where the number of such polynomials and the size of the coefficients can be precisely determined.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2013

In this thesis, we have designed the indirect adaptive controller using Dynamic Neural Units(DNU) for unknown nonlinear systems. Proposed indirect adaptive controller using Dynamic Neural Unit based upon the topology of a reverberating circuit in a neuronal pool of the central nervous system. In this thesis, we present a genetic DNU-control scheme for unknown nonlinear systems. Our method is different from those using supervised learning algorithms, such as the backpropagation (BP) algorithm, that needs training information in each step. The contributions of this thesis are the new approach to constructing neural network architecture and its training.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.3
• /
• pp.189-195
• /
• 2000

The mathematical solutions of the stability convergence are important problems in system control. In this paper such problems are analyzed and resolved for system control using multilayer neural networks. We describe an algorithm to control an unknown nonlinear system with a disturbance, using a multilayer neural network. We include a disturbance among the modeling error, and the weight update rules of multilayer neural network are derived to satisfy Lyapunov stability. The overall control system is based upon the feedback linearization method. The weights of the neural network used to approximate a nonlinear function are updated by rules derived in this paper . The proposed control algorithm is verified through computer simulation. That is as the weights of neural network are updated at every sampling time, we show that the output error become finite within a relatively short time.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.600-604
• /
• 2010

A method of width adaptation in the radial basis function network (RBFN) using stochastic gradient (SG) algorithm is introduced. Using Taylor's expansion of error signal and differentiating the error with respect to the step-size, the optimal time-varying step-size of the width in RBFN is derived. The proposed approach to adjusting widths in RBFN achieves superior learning speed and the steady-state mean square error (MSE) performance in nonlinear channel environment. The proposed method has shown enhanced steady-state MSE performance by more than 3 dB in both nonlinear channel environments. The results confirm that controlling over step-size of the width in RBFN by the proposed algorithm can be an effective approach to enhancement of convergence speed and the steady-state value of MSE.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.12
• /
• pp.827-833
• /
• 2004

In active noise control (ANC) systems, the error-reduction performance of the conventional Filtered-X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortions in the secondary path such as in the power amplifiers, loudspeakers and transducers. In this paper, a nonlinear FXLMS algorithm with high error-reduction performance is proposed to compensate for undesirable nonlinearities in the secondary-path of ANC systems by employing the inverse Volterra filtering approach. In particular, the proposed approach is based on the utilization of the conventional P-th order inverse approach to nonlinearity compensation in the secondary path of ANC systems. Finally, the simulation results showed that the proposed approach yields a better nonlinearity compensation performance for the ANC systems with a nonlinear secondary path than the conventional FXLMS.