• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.685-689
• /
• 2004

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of HVAC(Heating, Ventilating and Air-Conditioning) for double' deck train. The HVAC system is installed under the roof of carbody. In the lay-out of HVAC system, air duct must be installed to supply air to 1st and 2nd floor respectively. The standard k-$\epsilon$ and LES models for turbulence and SIMPLE algorithm for pressure equation hased on finite volume method are used to solve the physic a] HVAC model. To assure convergence, QUICK scheme for momentum equation and the 2nd order upwind scheme for turbulent equations arc used. From the results of simulation, the temperature and velocity magnitude are also distributed uniformly in the interior of double-deck passenger car.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.373-379
• /
• 2001

There is a big issue to generate 3D hexahedral finite element (FE) model, since a process to divide the whole domain into several simple-shaped sub-domains is required before generating a continuous mesh with mapped mesh generators. In general, it is nearly impossible to set up proper division numbers interactively to keep mesh connectivity between sub-domains on a complicated arbitrary-shaped domain. If mesh continuity between sub-domains is not required in an analysis, this complicated process can be omitted. Element-free Galerkin method (EFGM) can accept discontinuous meshes, which only requires nodal information. However it is difficult to choose a reasonable influenced domain in moving least squares scheme with non-uniformly distributed nodes in discontinuous FE models. A new FE scheme fur discontinuous mesh is proposed in this paper by applying improved EFGM with some modification to derive FE approximated function in discontinuous parts. Its validity is evaluated on linear elastic problems.

• 소음진동
• /
• 제8권1호
• /
• pp.122-131
• /
• 1998

Internal and external acoustic fields of the engine inlet are calculated by using a finite element method. The far fields non reflecting boundary condition is enforced by using a wave envelope element, which is a kind of infinite element. The geometry is assumed an axisymetric duct. Sources of the fan are modeled by the Tyler and Sofrin's theory. Effects of uniformly moving medium are considered. A pulsating sphere and an oscillating piston problem are calculated to verify the external problems, and compared with exact solutions. When the wave envelope element is applied at the far boundary, the calculated finite element solutions show good agreements with the exact solutions. The engine inlet is solved with the combined internal and external grid. The cut-off phenomena on engine inlet duct are observed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.114-117
• /
• 2005

In the reactive concentric resonator, perforated inner tubes are widely used for various purposes related to noise reduction, flow guiding, and structural aspects. Perforation distribution patterns influence both the acoustic performance and mechanical performance. In this study, the influence of distribution patterns on acoustic performance are explained by adopting the concept of extended inlet/outlet length. Predicted transmission with varying extended inlet/outlet length is compared with prediction by varying distribution patterns. The transmission loss difference due to perforation distribution patterns can be explained by changing the extended inlet/outlet length of the uniformly perforated resonator.

• 한국음향학회지
• /
• 제17권2호
• /
• pp.32-42
• /
• 1998

본 논문은 비균일 분포 수동형 견인 배열 센서를 사용하여 입사각 추정은 물론, 도 플러 주파수를 동시에 추정해내기 위한 기법을 제안한다. 균일 선형 센서 배열을 사용하는 전통적인 수동형 견인 센서 배열 처리기법은 센서간의 등 간격 구조 및 단순한 표본 과정에 기인하여 활용 분야의 한계성을 가지며, 주된 응용 분야가 방사된 음향신호의 입사각을 추 정하는데만 국한되어 사용될 수 있다는 문제점을 내포하고 있다. 이러한 사실 때문에, 수중 천해 환경 하에서 견인함의 등속 이동에 의해 발생하는 도플러 주파수들에 대한 정보는 목 표물에 대한 식별이나 음향신호 전달 경로의 모델링에 중요한 매개변수로 작용하며, 일반적 인 수동형 견인 센서 배열의 사용에 의한 처리 방식으로는 이러한 매개변수의 추출이 불가 능하게 된다. 본 논문은 이러한 제한성을 극복하고 방사 신호들의 개별적인 입사각 및 도플 러 주파수의 동시 추정을 가능케하도록 비균일 분포의 선형 센서 배열과 Sample Skipping 기법(Sample Skipping Technique;SST)을 적용한 새로운 형태의 수동형 견인 배열 센서 처 리 기법을 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.13-16
• /
• 1999

An active contour model, Snake, was developed as a useful segmenting and tracking tool lot rigid or non-rigid (i.e. deformable) objects by Kass in 1987 In this research, Snake is newly designed to cover this large moving case. Image flow energy is proposed to give Snake the motion information of the target object. By this image flow energy Snake's nodes can move uniformly along the direction of the target motion in spite of the existences of local minima. Furthermore, when the motion is too large to apply image flow energy to tracking, a jump mode is proposed for solving the problem. The vector used to make Snake's nodes jump to the new location can be obtained by processing the image flow. The effectiveness of the proposed Snake is confirmed by some simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.329-334
• /
• 1992

It has been shown that the application of hydrostatic pressure during superplastic forming of 8090A1 can prevent the cavitaiton normally encountered at atmospheric pressure and cavity growth rate factor .eta. in the plane strain state is greater than that in the equibiaxial stress state. .eta. value shows some difference compared to the theoretical value, which seems to be due to the continuous nucletion and coalescence of voids during superplastic deformation. Scatter of measured data of cavity volume fraction seems to be on preferential nucleation of viods on non-uniformly distributed second phase particles in the deforming matrix.

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.151-160
• /
• 1996

The fatigue test under the constant amplitude repeated loading is performed to investigate the fatigue behavior of the Torque Shear type high tension bolted joint which is able to manage the axial force uniformly. From the test results, it's known that the reduction of the axial force of T/S bolt followed by the elasped time is similar to that of the high tension bolts. The difference of relaxation is not occurred according to the position of bolts, the size of the introduced axial force but the effect of the variation of temperature is large. In the reduction of the axial force followed by the cumulation of the fatigue load, the outer bolt is larger than the inner bolt. This result depends on the difference in the distribution of the non-slip zone. The variation of the surface roughness affects the slip and the reduction of the anal force.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.17-23
• /
• 2020

Cryogenic insulation systems, with proper materials selection and execution, can offer the highest levels of thermal performance. Insulations are listed in order of increasing performance and, generally, in order of increasing cost. The specific insulation to be used for a particular application is determined through a compromise between cost, ease of application and the effectiveness of the insulation. Consequently, materials, representative test conditions, and engineering approach for the particular application are crucial to achieve the optimum result. The present work is based on energy cost balance for optimizing the thickness of insulated chambers, using foamed or multi layered cryogenic shell. The considered insulation is a uniformly applied outer layer whose thickness varies with the initial and boundary conditions of the studied vessel under steady-state radial heat transfer. An expression of the optimal insulation thickness derived from the total cost function and depending on the geometrical parameters of the container is presented.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.87-102
• /
• 2011

The purpose of this paper is to prove strong convergence theorems for finding a common element of the set of fixed points of a weak relatively nonexpansive mapping and the set of solutions of the variational inequality for an inverse-strongly-monotone mapping by a new hybrid method in a Banach space. We shall give an example which is weak relatively nonexpansive mapping but not relatively nonexpansive mapping in Banach space $l^2$. Our results improve and extend the corresponding results announced by Ying Liu[Ying Liu, Strong convergence theorem for relatively nonexpansive mapping and inverse-strongly-monotone mapping in a Banach space, Appl. Math. Mech. -Engl. Ed. 30(7)(2009), 925-932] and some others.