• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.143-151
• /
• 2017

PURPOSE. The design of the attachment must provide an optimum stress distribution around the implant. In this study, for implant overdentures with a bar/clip attachment or a locator attachment, the stress transmitted to the implant in accordance with the change in the denture base length and the vertical pressure was measured and analyzed. MATERIALS AND METHODS. Test model was created with epoxy resin. The strain gauges made a tight contact with implant surfaces. A universal testing machine was used to exert a vertical pressure on the mandibular implant overdenture and the strain rate of the implants was measured. RESULTS. Means and standard deviations of the maximum micro-deformation rates were determined. 1) Locator attachment: The implants on the working side generally showed higher strain than those on the non-working side. Tensile force was observed on the mesial surface of the implant on the working side, and the compressive force was applied to the buccal surface and on the surfaces of the implant on the non-working side. 2) Bar/clip attachment: The implants on the both non-working and working sides showed high strain; all surfaces except the mesial surface of the implant on the non-working side showed a compressive force. CONCLUSION. To minimize the strain on implants in mandibular implant overdentures, the attachment of the implant should be carefully selected and the denture base should be extended as much as possible.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.118-123
• /
• 2017

PURPOSE. To investigate the effect of non-thermal atmospheric pressure plasma (NTAPP) treatment on shear bond strength (SBS) between resin cement and colored zirconia made with metal chlorides. MATERIALS AND METHODS. 60 zirconia specimens were divided into 3 groups using coloring liquid. Each group was divided again into 2 sub-groups using plasma treatment; the experimental group was treated with plasma, and the control group was untreated. The sub-groups were: N (non-colored), C (0.1 wt% aqueous chromium chloride solution), M (0.1 wt% aqueous molybdenum chloride solution), NP (non-colored with plasma), CP (0.1 wt% aqueous chromium chloride solution with plasma), and MP (0.1 wt% aqueous molybdenum chloride solution with plasma). Composite resin cylinders were bonded to zirconia specimens with MDP-based resin cement, and SBS was measured using a universal testing machine. All data was analyzed statistically using a 2-way ANOVA test and a Tukey test. RESULTS. SBS significantly increased when specimens were treated with NTAPP regardless of coloring (P<.001). Colored zirconia containing molybdenum showed the highest value of SBS, regardless of NTAPP. The molybdenum group showed the highest SBS, whereas the chromium group showed the lowest. CONCLUSION. NTAPP may increase the SBS of colored zirconia and resin cement. The NTAPP effect on SBS is not influenced by the presence of zirconia coloring.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2017

PURPOSES : This study is primarily focused on evaluating the effects of the non-linear stress-strain behavior of RAP concrete on structural response characteristics as is applicable to concrete pavement. METHODS : A 3D FE model was developed by incorporating the actual stress-strain behavior of RAP concrete obtained via flexural strength testing as a material property model to evaluate the effects of the non-linear stress-strain behavior to failure on the maximum stresses in the concrete slab and potential performance prediction results. In addition, a typical linear elastic model was employed to analyze the structural responses for comparison purposes. The analytical results from the FE model incorporating the actual stress-strain behavior of RAP concrete were compared to the corresponding results from the linear elastic FE model. RESULTS : The results indicate that the linear elastic model tends to yield higher predicted maximum stresses in the concrete as compared to those obtained via the actual stress-strain model. Consequently, these higher predicted stresses lead to a difference in potential performance of the concrete pavement containing RAP. CONCLUSIONS : Analysis of the concrete pavement containing RAP demonstrated that an appropriate analytical model using the actual stress-strain characteristics should be employed to calculate the structural responses of RAP concrete pavement instead of simply assuming the concrete to be a linear elastic material.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2879-2883
• /
• 2013

Objective: To investigate differences in mutations of epidermal growth factor receptor (EGFR) gene and relationships with clinicopathological features in patients with non-small cell lung cancer (NSCLC) between Uygur and Han ethnic groups. Methods: The Scorpions amplification refractory mutation system (Scorpions ARMS) was used to measure mutations in exons 18, 19, 20 and 21 of the EGFR gene in paraffin-embedded tumor tissue from NSCLC cases, and statistical analysis was performed to investigate links with clinicopathological features in different histological types of NSCLC. Results: Results from ARMS testing showed EGFR mutations in tumor tissues from six (6) of 50 NSCLC patients of Uygur ethnic group, with a positive rate of 12.0%; four of them (4) had exon 19 deletion in EGFR, and two (2) had L858R point mutation in exon 21 of EGFR. Statistically significant difference was noted in EGFR genetic mutation between adenocarcinoma and non-adenocarcinoma (P < 0.05), but no differences with gender, age group, smoking status, or stage (P > 0.05). EGFR mutations were detected in tumor tissues from 27 of 49 NSCLC patients of Han ethnic group, with a positive rate of 55.1%; 19 of them had exon 19 deletions, seven (7) had L858R point mutations in exon 21 of EGFR and one (1) had mutations in both exon 18 G719X and exon 20 T790M of EGFR. Statistically significant differences were noted in EGFR genetic mutations between genders and between adenocarcinoma and non-adenocarcinoma (P<0.05), but not with age group, smoking status, or stage (P > 0.05). Conclusion: Statistically significant differences were noted in the positive rates of EGFR genetic mutations in NSCLC patients between Uygur and Han ethnic groups, with lower positive rates for the Uygur cases.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.19 no.2
• /
• pp.110-115
• /
• 2016

Purpose: We performed to reveal the association between the Helicobacter pylori infection and body weight among children. Methods: Out retrospective study included patients who underwent the H. pylori immunoglobulin G testing at Konyang University Hospital between March 2011 and June 2014. These patients were classified as seropositive (28 boys, 27 girls; mean age: $9.89{\pm}3.28years$) or seronegative (55 boys, 54 girls; mean age: $9.84{\pm}3.02years$). Next, we compared various characteristics between the seropositive and negative groups, as well as between obese children (body weight ${\geq}90th$ percentile) and non-obese children (body weight <90th percentile). Furthermore, we compared the change in body weight after 2 months of treatment with amoxicillin, clarithromycin and omeprazole among the 55 seropositive children (14 treated children and 41 non-treated children). Results: There were no differences in the weights and laboratory data for the 55 seropositive children and 109 seronegative children (weight; $40.96{\pm}18.11kg$ vs. $36.85{\pm}13.72kg$, respectively; p=0.14). And, there was no difference in the prevalence of H. pylori infection among the 29 obese and 135 non-obese children (p=0.581). However, after 2 months of eradication, the 14 treated patients exhibited a significant weight gain ($+0.91{\pm}0.52kg$), compared to the 41 non-treated patients ($-0.29{\pm}1.16kg$, p=0.025). Conclusion: Our findings present that obesity was not associated with the H. pylori infection, although H. pylori eradication led to significant increase in body weight.

• Korean Journal of Biological Psychiatry
• /
• v.21 no.4
• /
• pp.141-150
• /
• 2014

Objectives The purpose of this study is to evaluate the effects of attachment security, social support and health-related burden in the prediction of psychological distress and the mediation effects of social support and health-related burden in relationship between attachment security and psychological distress. Methods Finally, 161 patients were included for the analysis. Chi-square test and independent samples t-test were used for comparing differences between depressive/anxious group and non-depressive/non-anxious group. For evaluating the relationship among attachment security, social support, psychological distress and health-related burden, structural equation modeling analysis were performed. Results 40.7% and 32.0% of the patients have significant depressive symptoms and anxiety symptoms, respectively. In the analysis for testing the differences between groups who have psychological distress and who have not, there were no significant differences of sociodemographic factors and medical characteristics between groups, except for association between depressive symptoms and type of surgery (p = 0.01). Contrary to sociodemographic and medical characteristics, there were significant differences of health-related burden and two coping resources (attachment security and social support) between groups (all p < 0.01), except for the support from medical team in between anxious group and non-anxious group (p = 0.20). In the structural equation model analysis (Model fit : chi-square/df ratio = 0.8, root mean square error of approximation = 0.000, comparative fit index = 1.000, non-normed fit index =0.991), attachment security and social support emerged as an important predictor of psychopathology. Conclusions Attachment security and social support are important factors affecting the psychological distress. We suggest that individual attachment style and the social support state must be considered to approach the newly diagnosed breast cancer patients with psychological distress.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.229-239
• /
• 2018

Currently, in Korea, a dry food simulant has not been designated for the migration testing of paper and board, food contact materials (FCMs) being used in dry foods, and foods heated at ultra-high temperature. Considering the diverse usage of FCMs, in order to secure reliable and confident safety evaluation and to overcome the non-trade barrier tariff in worldwide trade, migration testing methods of what should be more clearly defined for securing and overcoming. This article delves into the available literature on the use of $Tenax^{(R)}$ as a simulant for dry foods as well as its suitability and limitations, and examines the feasibility of its introduction into Korean FCMs regulation. Most experimental studies using $Tenax^{(R)}$ showed overestimated migration values when used in real foods, which reflects the potential of $Tenax^{(R)}$ as a dry food simulant in a worst-case scenario. However, more studies are required to optimize migration testing using $Tenax^{(R)}$ by standardizing the solvent type and the extraction method for surrogates of various FCMs and foods, and to resolve the potential drawbacks in the use of $Tenax^{(R)}$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.481-487
• /
• 2017

The purpose of this study is to develop the hybrid sound-absorbing materials that is made from organic polyurethane sponge impregnated with inorganic binder solutions. The inorganic slurry which is made from ${\alpha}$-hemihydrate gypsum mixed with 60% water, and various additives including plasticizer are used as binder. The test specimens are prepared and tested for sound absorption performance by the impedance tube methods. From the test results, noise reduction coefficient(NRC) of development materials specimen bound by the inorganic binder slurry is 0.41. They are 2 times or more higher than commercial products specimens bound by organic materials only which have NRC values in the range of 0.14 to 0.28. The polyurethane sponge specimens impregnated with inorganic gypsum slurry binder have a good balance between performance and cost, and have proper properties in density, thermal conductivity, non-combustible, and absence of harmful substances as sound-absorbing internal boards for noise barrier wall. It is apparent that the good sound absorption materials can be produced according to the optimum mix design that is recommended from this study.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.49-57
• /
• 2012

From among the NDT (Non-Destructive Testing) methods, the MFL (Magnetic Flux Leakage) PIG (Pipeline Inspection Gauge) is especially suitable for testing pipelines because the pipeline has high magnetic permeability. MFL PIG showed high performance in detecting the metal loss and corrosions. However, MFL PIG is difficult to detect the crack which occured by exterior-interior pressure difference in pipelines and the shape of crack is very long and narrow. Therefore, the new PIG is needed to be researched and developed for detecting the cracks. The CMFL (Circumferential MF) PIG performs magnetic fields circumferentially and can maximize the magnetic flux leakage at the cracks. In this paper, CMFL PIG is designed and the distribution of the magnetic fields is analyzed by using 3 dimensional nonlinear finite element method (FEM). By Simulating and Measuring the magnetic leakage field, it is possible to detect of axial cracks in the pipeline.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.96-102
• /
• 2012

The current establishment of car engineering plastic piping polyethylene (PE) tube used as bonding state or part of the health or safety of fusion is very important. A part of these fusion methods to determine the soundness of the short-term trials and long-term tests can be largely classified. Typical tests included short-term strength, tensile strength, impact strength, compressive strength, resiliency and compression. Polyethylene (PE) pipes installed in the domestic terms of overall penetration rate of 45% has been used. However, polyethylene (PE) pipes have reliability problems, and these occurs mostly in part by defective welding. Therefore, the test is necessary for safety. Non-destructive methods (ultrasonic testing) are difficult to be used. Therefore, Polyethylene (PE) pipe are used. Fusion of thses materilas is necessary in these field however, its technical, and basic research has not been studied well. In this research, short-term strength of welding parts, its tensile strength, hardness, fatigue, and microstructure have been analyzed to find the optimum process conditions to improve mechanical properties.