• Food Science and Industry
• /
• v.51 no.3
• /
• pp.245-258
• /
• 2018

Natural and synthetic antibacterial materials are used in foods to avoid bacterial contamination-induced food poison and deterioration. Due to the human and environmental safety, natural products including plant extracts have been extensively added into foods as antibacterial materials. Since some of core molecules comprised in those plant extracts are hardly dissolved in aqueous phases or food matrixes, nanotechnological approaches have been suggested to overcome such obstacles. Here we report domestic and international various types of plant- or non-plant-origin antibacterial materials that have been commercialized and used for the food industry. To improve solubility and stability of such antibacterial materials, nano-encapsulation or nano-complexation methods are also investigated focusing on the utilization of dextrins and proteins as coating materials.

• Membrane Journal
• /
• v.32 no.3
• /
• pp.198-208
• /
• 2022

Membrane can selectively separate various substances such as organic substances, liquids, solutes, vapors, gases, ions or electrons according to the separation technology and various uses. Membranes are largely divided into symmetric membranes and asymmetric membranes, and classified into porous and nonporous structure depending on the presence or absence of pores. Also, the interface of the membrane may be molecularly uniform, or chemically or physically non-uniform. Preparation techniques include melt extrusion, stretching, template leaching, track-etching, solution casting, phase inversion, and solution coating method. The prepared membrane can be applied to various applications such as microfiltration, ultrafiltration, nanofiltration, reverse osmosis, gas separation and energy fields. This review provides a tutorial on how to prepare membranes according to the classification and types.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.594-602
• /
• 2022

Cast-resin transformers are widely installed in various electrical power systems because of their low operating cost and low influence on external environmental factors. However, when they have an internal defect during the manufacturing process or operation, a partial discharge (PD) occurs, and eventually destroys the insulation. In this paper, a Rogowski-type PD sensor was studied to replace commercial PD sensors used for the insulation diagnosis of power apparatus. The proposed PD sensor was manufactured with four different types of PCB-based winding structures, and it was analyzed in terms of the detection characteristics for standard calibration pulses and the changes of the output voltage according to the distance. The output increased linearly in accordance with the applied discharge amount. It was confirmed that the hexagon structure sensor had the highest sensitivity, because the winding cross-sectional area of the sensor was larger than others. In addition, as the distance from the defect increased, the output voltage of the sensors decreased by 7.32% on average. It was also confirmed that the attenuation rate according to the distance decreased as the input discharge amount increased. For the application of this new type sensor, PD electrode system was designed to simulate the void defect. Waveforms and PRPD patterns measured by the proposed PD sensors at DIV and 120% of DIV were the same as the results measured by MPD 600 based on IEC 60270. The proposed PD sensors can be installed on the inner wall of the transformer tank by coating its surfaces with a non-conductive material; therefore, it is possible to detect internal defects more effectively at a closer distance from the defect than the conventional sensors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.533-537
• /
• 2003

Compared to sintered polycrystalline diamond (PCD), the deposited thin film diamond has a great advantage on the fabrication of cutting tools with complex geometries such as drills. Because of high performance in high speed machining non-ferrous difficult-to-cut materials in the field of automobiles industry, aeronautics and astronautics industry, diamond-coated drills find large potentialities in commercial applications. However, the poor adhesion of the diamond film on the substrate and high surface roughness of the drill flute adversely affect the tool lift and machining quality and they become the main technical barriers for the successful development and commercialization of diamond-coated drills. In this paper, diamond thin films were deposited on the commercial WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple coating technology based on changing gas pressure in different process stages was developed. The large triangular faceted diamond grains may have great contribution to the adhesive strength between the film and the substrate, and the overlapping ball like blocks consisted of nanometer sized diamond crystals may contribute much to the very low roughness of diamond film. Adhesive strength and quality of diamond film were evaluated by scanning electron microscope (SEM), atomic force microscope (AFM), Raman spectrum and drilling experiments. The ring-block tribological experiments were also conducted and the results revealed that the friction coefficient increased with the surface roughness of the diamond film. From a practical viewpoint, the cutting performances of diamond-coated drills were studied by drilling the SiC particles reinforced aluminum-matrix composite. The good adhesive strength and low surface roughness of flute were proved to be beneficial to the good chip evacuation and the decrease of thrust and consequently led to a prolonged tool lift and an improved machining quality. The wear mechanism of diamond-coated drills is the abrasive mechanical attrition.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.114-122
• /
• 2007

In high strength bolted joints, the corrosion of base material causes the reduction of slip resistance of the joints. In this study, tensile tests on slip-critical joints utilizing Zn/Al metal spraying corrosion resistance method were carried out in order to prevent the corrosion and meet the required mechanical characteristics of joints. In addition, slip coefficient and surface roughness were calculated. The key parameters were surface finishing condition and thickness of coating with the identical geometry in all specimens. From the results, it is found that the slip coefficient of the joints with coated finish after sand blast treatment as well as those of non-coated joints with only sand blast treatment were similar or superior to 0.45, which is a specification criteria of slip coefficient in friction-typed joints.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.67-76
• /
• 2000

An experiment was conducted to evaluate the effects of lime, zeolite, and rock phosphate as coating materials and coated seed size on germination, establishment, and early growth of pasture species at the experimental livestock farm, Yonam College of Agriculture in 1997. Germinating energy and germination of coated tall fescue and orchardgrass seeds were lower than those of non-coated seeds. Coated seed of tall fescue with 70% lime and 15% rock phosphate was the best in germination. The germination of small size seed (< ${\varnothing}2$ mm) was better than those of medium (> ${\varnothing}2$ mm and < ${\varnothing}2$ mm) and large size seeds (> ${\varnothing}2$ mm). Germination of coated orchardgrass seed with 55% lime and 30% rock phosphate treatment was higher than that of other coated seeds, and germination of small size seed was higher than those of medium and large size seeds (p<0.05). Germination energy and germination of coated alfalfa and birdsfoot trefoil seeds were lower than those of non-coated seeds. Germination of coated alfalfa seed with 70% lime and 15% rock phosphate, and 45% lime and 55% rock phosphate was higher compared with other coated seeds. Germination of medium size seed was higher than those of small and large size seeds (p<0.05). Among coated birdsfoot trefoil seed, 45% lime and 40% rock phosphate treatment resulted in higher germinating energy and germination than other treatments. There was no significant difference in establishment and early growth of coated tall fescue and orchardgrass seeds. However, tall fescue and orchardgrass coated with 45 % lime and 40% phosphate rock showed higher establishment and early growth. There was also no significant difference in establishment and early growth of coated alfalfa among the treatments. Among coated treatments, establishment and early growth of alfalfa coated with 75% lime and 10% rock phosphate were the highest and showed 46.4% and $72.6\;g/\textrm{m}^2$, respectively. Establishment and early growth of coated birdsfoot trefoil with 55% lime and 30% rock phosphate were the highest among coated birdsfoot trefoil seed (p<0.05) and recorded 46.4% and $44.6\;g/\textrm{m}^2$, respectively. Results of this study indicate that the germination of coated grass and legume seed may be improved by increasing the percentage of rock phosphate and decreasing that of lime. With regard to seed size, the germination of pasture species with small seed size (< ${\varnothing}2$ mm) may be better than medium and large size seeds except alfalfa. Establishment and early growth of grasses can be also improved by increasing the percentage of rock phosphate and decreasing that of lime.

• Journal of the Society of Disaster Information
• /
• v.8 no.1
• /
• pp.18-26
• /
• 2012

Accordingly architectural structure is getting high-rise and bigger, a use of high strength and high performance concrete has been increasing. High performance concrete has cons of explosion in a fire. This Explosion in the fire can cause the loss of the sheath on a concrete surface, therefore it effects that increasing a rate of heat transmission between the steel bar and inner concrete. Preventing this explosion of high performance concrete in the fire, many kinds of researches are now in progressing. Typically, researches with using Polypropylene-fiber and Steel-fiber can prove controling the explosion, but the reduction of mobility was posed as a problem of workability. Consequently, to solve the problem as mentioned above, concrete cans secure fire resisting capacity through the using of coating liquid, including Ester-lubricant and non-ionic characteristic surfactant. This research has been drawn a ideal condition in compressive strength areas of concrete by an experiment. When applying 13mm of polyamide-fiber, proper fiber mixing volume by compressive strength areas of concrete is $0.8kg/m^3$ in 60MPa, $1.0kg/m^3$ in 80MPa, $1.5kg/m^3$ in $100MPa/m^3$. These amount of a compound can control the explosion.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.123-131
• /
• 2008

In Oriental medicine, the status of a tongue is the important indicator to diagnose the condition of one's health like the physiological and the clinicopathological changes of internal organs in a body. A tongue diagnosis is not only convenient but also non-invasive, and therefore widely used in Oriental medicine. However, the tongue diagnosis is affected by examination circumstances like a light source, patient's posture, and doctor's condition a lot. To develop an automatic tongue diagnosis system for an objective and standardized diagnosis, segmenting a tongue region from a facial image captured and classifying tongue coating are inevitable but difficult since the colors of a tongue, lips, and skin in a mouth are similar. The proposed method includes preprocessing, over-segmenting, detecting the edge with a local minimum over a shading area from the structure of a tongue, correcting local minima or detecting the edge with the greatest color difference, selecting one edge to correspond to a tongue shape, and smoothing edges, where preprocessing consists of down-sampling to reduce computation time, histogram equalization, and edge enhancement, which produces the region of a segmented tongue. Finally, the systematic procedure separated only a tongue region from a face image with a tongue, which was obtained from a digital tongue diagnosis system. Oriental medical doctors' evaluation for the results illustrated that the segmented region excluding a non-tongue region provides important information for the accurate diagnosis. The proposed method can be used for an objective and standardized diagnosis and for an u-Healthcare system.

• Korean Journal of Oriental Medicine
• /
• v.13 no.2 s.20
• /
• pp.53-58
• /
• 2007

Background and Purpose : The purpose of this study was to investigate that which symptoms are adequate indicator of the Dampness-Phlegm pattern in the stroke patients. Methods : In the time period Jul. 2005 to Sep. 2006, 136 patients with a first-ever stroke admitted in the department of Internal Medicine of Daejeon University Oriental Medical Hospital in Daejeon city, Wonkwang Oriental Medical Hospital in Iksan, JeonJu city were included. Patients were hospitalized within 3 months after the onset of stroke. Stroke patients had been interviewed by resident who studied standard operation procedures in Fundamental Study for Standardization and Objectification of Differentiation and Pattern Identification of Syndrome of Oriental Medicine for Stroke. Gi-deficiency patients was confirmed by medical specialist diagnosis, resident diagnosis, case report form analysis without a dissenting voice. Results : Dampness-Phlegm group included 37 case, Non Dampness-Phlegm group 45 case out of 136 patients. white tongue coating, slippery purse, yellowish complexion, enlarged tongue, swollen tongue were higher among Dampness-Phlegm group. Dampness-Phlegm and Non Dampness-Phlegm patients do not significantly differ in heavy sensation in the head, voice with sputum, teeth printed tongue, borborygmus, dizziness with nausea. Conclusions : This study was insufficiency because sample size is very small. More data from prospective cohort studies will help to Korean Standard Differentiation of the Symptoms and Signs for the Stroke.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.76-85
• /
• 2016

Fabrication of polysulfone (PSf) hollow fiber membranes was investigated for the separation of $N_2/NF_3$ gas mixtures, which are emitted from the display and the semiconductor industries. A combination of the non-solvent induced phase separation (NIPS) and the vapor-induced phase separation (VIPS) technique was applied to develop high flux hollow fiber membranes. Thin polymer layers were further coated onto the surface of the hollow fiber membranes by using polydimethylsiloxiane (PDMS) or Teflon AF1600(R), which contributes to improve the $N_2/NF_3$ selectivity. The $N_2/NF_3$ separation performances of our PSf hollow fiber membranes were determined by the intrinsic properties of coating materials. Especially, the PSf hollow fiber membrane coated with Teflon AF 1600(R) exhibited a higher $N_2/NF_3$ selectivity (> 14) with a slightly lower $N_2$ permeance (4.5 GPU), as compared to the commercial PSf counterparts. This feature provides a good potential as a membrane structure to separate $N_2/NF_3$.