• Nuclear Engineering and Technology
• /
• v.39 no.6
• /
• pp.717-724
• /
• 2007

A measurement-based time-domain noise simulation of radiation detector-preamplifier (front-end) noise in nuclear spectroscopy is described. The time-domain noise simulation was performed by generating "noise random numbers" using Monte Carlo's inverse method. The probability of unpredictable noise was derived from the empirical cumulative distribution function via the sampled noise, which was measured from a preamplifier output. Results of the simulated noise were investigated as functions of time, frequency, and statistical domains. Noise behavior was evaluated using the signal wave-shaping function, and was compared with the actual noise. Similarities between the response characteristics of the simulated and the actual preamplifier output noises were found. The simulated noise and the computed nuclear pulse signal were also combined to generate a simulated preamplifier output signal. Such simulated output signals could be used in nuclear spectroscopy to determine energy resolution degradation from front-end noise effect.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.707-714
• /
• 2012

After a single-stage, second-order, multiple-feedback ${\Delta}-{\Sigma}$ modulator and a two-stage, second-order MASH ${\Delta}-{\Sigma}$ modulator were analyzed and simulated using Simulink and Matlab and their characteristics were compared, the following result was obtained: 1) The two ${\Delta}-{\Sigma}$ modulators do not have group delay distortion. 2) The characteristics of the noise shaping are nearly identical. As a result of the noise shaping, the power spectral densities have slope of 40 dB/dec. 3) There was no spurious tone. 4) The input range of the two modulators is from -1 to +1 in common. 5) Because the output of the two-stage MASH modulator is 2-bits (4-levels), design of frequency dividers and charge pumps of PLL are more demanding.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.326-329
• /
• 2004

In this paper, we show a new form of blood pressure controller combined PI control with $H_{\infty}$ loop-shaping. Hypertensive patients or post-operative patients need to maintain normally blood pressure. Exact regulation of blood pressure is needed for maintaining variable blood pressure of preventing complications. The regulation of blood pressure is achieved by injecting drugs, and usually sodium nitroprusside is used as those kinds of drugs. It is necessary to control the infusion rate sodium-nitroprusside carefully to achieve the desired blood pressure. It has been known that regulation of blood pressure by automatic controller is more effective than regulation of blood pressure by human operators. The control of blood pressure has many constraints and uncertainties. Most of biological system has the time-varying variables and the side effects such as increased risk of sepsis and organ failure. To solve such a problem, we design a new robust PI controller using $H_{\infty}$ loop-shaping to decrease noise effects that come out from human body and errors for time delay. The system with designed controller shows more stable control of mean blood pressure and more robust performance for uncertainties. Validation methods for the control performance are confirmed to computer simulations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.28-33
• /
• 2008

In a scanning electron microscope (SEM), outside acoustic noise causes image noise that distorts observations of the specimen being examined. A SEM that is less sensitive to acoustic noise is highly desirable. This paper investigates the image noise problem by addressing the mode shapes of the base plate and the transmission path of the acoustic noise and vibration. By arranging the position of the rib, a new SEM base plate was developed that had twisting as the 1st and 2nd modes. In those two twisting modes, vibration nodes existed near the center of the base plate where the specimen chamber is placed. Less vibration was transmitted to the chamber and to the specimen by the twisting modes compared to bending ones, which are the 2nd and 3rd modes for a rectangular plain base plate. An SEM with the developed base plate installed exhibited a significant reduction of image noise when exposed to acoustic noises below 250 Hz.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2
• /
• pp.66-74
• /
• 2008

In this paper, we propose new techniques that can improve the quality of AAC and SBR encoders comprised in low bitrate HE-AAC. To reduce the pre-echo artifacts often occurring for transient blocks in AAC, we propose an extended Temporal Noise Shaping (sTNS) in which the frequency range is selectively extended down to the low-frequency region. Also, for he high-frequency region being coded by SBR encoder, tones are identified through a sinusoidal modeling and their frequencies are adjusted within the QMF band in order to reduce the noise floor due to aliasing. Spectrograms of the decoded signals were compared and listening tests were conducted to evaluate the proposed algorithm. Results confirmed the effectiveness of the proposed algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.255-259
• /
• 1996

This paper presents active vibration control of a rotating cantilevered beam using piezoceramic actuators. A governing equation of motion is obtained by the Hamilton's principle and expressed in the state space representation. Subsequently, an H$_{\infty}$ control which is robust to system uncertainties is synthesized through the loop shaping design procedure. Computer simulations for the steady-state vibration control are undertaken in order to demonstrate the effectiveness and robustness of the proposed control methodology..y.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.14-23
• /
• 2003

This thesis proposes a sigma-delta modulator architecture with 2 Ms/s data rate and 12 bit resolution. A sigma-delta modulate has the features of oversampling and noise shaping. With these features, it can be connected with low resolution A/D converter to achieve higher resolution A/D converter. Most previous researches have been concentrated on high resolution but low data rate applications, e.g. audio applications. But, in order to be applied to various applications such as wireless data communication, researches on sigma-delta modulator architecture for higher data rate are required. The proposed sigma-delta modulator architecture has the sampling rate of 16 times Nyquist rate to achieve high data rate, and consists of a cascade of two 2nd order sigma-delta modulator to get relatively high resolution. The experimental result shows that the proposed architecture achieves 12-bit resolution at 2 Ms/s data rate.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.1-5
• /
• 2003

The random pulse width modulation(RPWM) on the noise and vibration abatement in inverter-fed induction motor drive is presented. This paper describes a RPWM technique based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the TMS320 C3l microprocessor was executed. Finally, the simulation and experimental results will be given to demonstrate the effectiveness of the proposed RPWM technique.

• Journal of Magnetics
• /
• v.17 no.3
• /
• pp.200-205
• /
• 2012

Recently, applications of the reluctance torque motor have been quite limited due to their inherent limitation of noise and vibration and thus, researches on the reluctance motor have been limited as well. However, with the tremendous increase in the cost of rare earth material magnets, studies of the reluctance torque motor are being conducted more and more. In principle, reluctance torque is generated when the inductance is changed. Therefore, in order to generate continuous torque in the switched reluctance motor, it is necessary to figure out the exact inductance level corresponding to the rotor position and the current level to be applied in that rotor position, respectively. If the current level or the rotor position is not accurately determined, then the generated reluctance torque becomes unstable and undesirable torque ripples prevail to eventually cause noise and vibrations. In this research, a flux switched reluctance motor (FSRM), which is classified into the switched reluctance motor (SRM), was studied. A methodology using the current shaping control according to the rotor position was proposed. Based on the proposed methodology, the optimal current waveform and the torque distribution function for the FSRM to minimize torque ripple was established and demonstrated in this paper.