• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.888-894
• /
• 2015

A new method for the simulation of the vehicle's interior road noise is proposed in the present study. The road noise model can synthesize road noise of a vehicle for varying driving speed within a range. In the proposed method, interior road noise is considered as a stochastic time-series, and is modeled by a nonstationary parametric model via two steps. First, each interior road noise signal, obtained from constant speed driving tests performed within a range of speed, is modeled as an autoregressive model whose parameters are estimated by using a standard method. Finally, the parameters obtained for different driving speeds are interpolated based on the varying driving speed to yield a time-varying autoregressive model. To model a full band road noise, audible frequency range is divided into an octave band using a wavelet filter bank, and the road noise in each octave band is modeled.

• ETRI Journal
• /
• 제24권3호
• /
• pp.190-196
• /
• 2002

This paper presents millimeter wave monolithic microwave integrated circuit (MMIC) low noise amplifiers using a $0.15{\mu}m$ commercial pHEMT process. After carefully investigating design considerations for millimeter-wave applications, with emphasis on the active device model and electomagnetic (EM) simulation, we designed two single-ended low noise amplifiers, one for Q-band and one for V-band. The Q-band two stage amplifier showed an average noise figure of 2.2 dB with an 18.3 dB average gain at 44 GHz. The V-band two stage amplifier showed an average noise figure of 2.9 dB with a 14.7 dB average gain at 65 GHz. Our design technique and model demonstrates good agreement between measured and predicted results. Compared with the published data, this work also presents state-of-the-art performance in terms of the gain and noise figure.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.42-51
• /
• 1996

Performance analysis of FH/CPFSK system with liiter-discriminator detection and integrate-dump post-detection filtering under the thermal noise and the partial-band noise jamming on the rayleigh fading channel have been analyzed. The thermal noise and partial-band noise jamming, rayleigh fading, intersymbol interference for all eight of the possible adjacent bit data patterns, and FM noise click for evaluating systems have been considered. Also optimum parameters to improve performance of FH/CPFSK system have been obtained and validities for AMPS and CDMA system of land-mobile-communication system through computer simulation have been proved.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1787-1802
• /
• 1996

In this paper, the performance for FH/CPFSK system with limiter-discriminator detection and integrage-and-dump post-detection filtering under thermal noie, partial-band noise jamming and rayleigh fading have been analyzed. The method of hard-decision diversity of which the transmitter repeated L times on different hops for each data symbol in a way to mutigate the effects of the jamming has been applied, and the receiver has been combined the L chips. Also, error-correcting code have been applied for improving performance of system. The thermal noise and partial-band noise jamming, intersymbol interference for all eight of the possible adjacent bit data patterns, and FM noise click for evaluating systems have been considered. Also optimum parameters to improve performance of FH/CPFSK system have been obtained and validities have been proved through computer simulation.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.120-121
• /
• 2001

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1191-1198
• /
• 2001

본 연구에서는 밀리미터파용 MMIC 저잡음 증폭기를 0.15$\mu$m pHEMT TRW 파운드리를 이용하여 설계, 제작하였다. 증폭기 설계시 능동소자모델링과 EM 시뮬레이션을 중심으로 설계가 이루어졌다. 기존의 모델의 단점을 기술하고 스케일링 문제를 해결하기 위하여 분산소자 모델을 사용하여 소신호 파라미터와 잡음 파리 미터를 정확히 예측하였다. 이러한 모델을 사용하며 2-단 단일 종지형 저잡음 증폭기 2종이 각각 Q-band(40~44 GHz)와 V-band(58~65GHz) 주파수 대역에서 설계되었다. Q-band 저잡음 증폭기의 경우 2.2 dB의 평균잡음지수와 18.3 dB의 평균이득이 측정되었으며 V-band 저잡음 증폭기의 경우는 65 GHz에서 14.7 dB의 평균이득과 2.9 dB의 평균잡음지수가 측정되었다. 이러한 결과는 시뮬레이션 결과와 일치하며 따라서 본 논문에서 사용설계기법이 밀리미터파 대역에서도 정확함을 의미한다. 또한 기존의 문헌과 비교하여 볼 때 잡음지수와 이득면에서 state-of-the-art성능을 나타냄을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.289-293
• /
• 2004

In this paper, data rate of VDSL system was analyzed in RFI(Radio Frequency Interference) environment. This Paper used Various 'VDSL Test Loop' suggested by ANSI DSL Standard group TIE1.4.Many parameters, 'Noise Model A', 'Noise Model F' and KARL-HAM band are used for more accurate results of the simulation. Most of conditions for simulation are followed to the ANSI Standard 'Spectrum management'. Many results have been calculated according to the different conditions of the test loops in simulation. Simulation results confirm that using shaped PSD mask to reject RFI is one of factor to decrease the performance of VDSL systems.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.761-767
• /
• 2007

In this paper, we deal wih a concurrent dual band low noise amplifier for a Radio Frequency Identification(RFID) reader operating at 912MHz and 2.45GHz. The design of the low noise amplifier is based on the TSMC $0.18{\mu}m$ CMOS technology. The chip size is $1.8mm\times1.8mm$. To improve the noise figure of the circuit, SMD components and a bonding wire inductor are applied to input matching. Simulation results show that the 521 parameter is 11.41dB and 9.98dB at 912MHz and 2.45GHz, respectively The noise figure is also determined to 1.25dB and 3.08dB at the same frequencies with a power consumption of 8.95mW.

• 한국통신학회논문지
• /
• 제34권3A호
• /
• pp.272-280
• /
• 2009

배경잡음 측정은 전파환경 조사 및 주파수 점유율의 비교기준인 임계레벨을 산출하는데 반드시 수행되어야 하는 매우 중요한 과정이다. 배경잡음 측정은 측정대상 대역에서 가급적 잡음만으로 구성된 부대역을 선정하고, 선정된 표본 부대역에 대하여 잡음전력을 측정하여 대상대역에 대한 대표값으로 사용하는 과정으로 이루어진다. 본 논문에서는 배경잡음으로 백색가우시안 잡음을 가정하고, 잡음 측정의 첫 번째 단계에서 신호가 적고 대부분 잡음으로만 구성된 대역을 선별하는데 적용될 수 있는 특이값 분해 (singular value decomposition, SVD)를 이용한 잡음대역 선정 방법을 제안한다. 기존에 널리 쓰여지는 방법인 신호강도확률분포 (amplitude probability distribution, APD) 방법과의 성능비교를 통하여 우수성을 확인하였다.

• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1159-1164
• /
• 2016

본 연구는 디지털위성중계기용 SHF 대역 저잡음증폭장치의 설계 및 구현에 대해 기술하였다. 잡음지수 최소화를 위하여 저잡음 증폭소자인 HEMT(: High Electron Mobility Transistor)소자를 적용하였고, 우주환경에 대한 사전 시뮬레이션 분석을 통하여 장비 오동작 가능성을 최소화 시켰다. 발사환경 시 발생하는 진동 및 우주방사능에 의한 TID(: Total Ionizing Dose)에 대한 시뮬레이션을 통해 신뢰성 있는 저잡음증폭장치를 설계하였으며, 제작 후 주요 성능지표에 대해 만족여부 확인 및 사전 성능 시뮬레이션 결과와 비교하였다.