• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.444-448
• /
• 2010

RCR 네트워크 토폴로지[1]는 짧은 지름, 대칭성 등의 특징을 가지고 있어 병렬컴퓨팅 환경을 구성하기에 적합한 상호접속네트워크의 일종이다. Hu and Cao[2]에 의하여 이 토폴로지 분석에 대한 재검토가 이루어졌으며, 그래프 비연결성, 직경, bisection width 등에 대한 오류가 있음을 지적하였다. 이 논문에서는 RCR 네트워크 토폴로지 특성을 분석하고, [2]의 결과에도 여전히 남아있는 '연결그래프가 되기 위한 조건' 및 직경에 대한 오류를 정정한다. 그리고 RCR 네트워크에서 최단경로를 구하기 위한 알고리즘을 제안한다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• 생물환경조절학회지
• /
• 제29권4호
• /
• pp.406-413
• /
• 2020

멜론(Cucumis melo L.)의 코이어 배지 수경재배 시 고품질 과실을 생산하기 위한 적정 착과 절위, 적심 절위 및 수확 시기를 구명하고자 하였다. 코이어 배지 슬라브(100 × 20 × 10cm)에 3주를 정식하였다. 양액은 야마자키 멜론 표준액을 이용하였고, 급액 농도는 '초기-중기(과실 비대기)-후기'의 생육 단계별로 1.8-2.0-2.3dS·m^-1 공급하였다. 착과 및 적심 절위 실험은 '피엠알달고나'와 '얼스아이비' 2품종을 이용하였다. 착과 절위 실험은 8-10, 11-13 및 14-15 마디에 각각 3처리하였다. 적심 절위 실험은 18, 21 및 24 마디에 각각 3처리하였다. 과실 수확시기 실험은 '피엠알달고나'와 '얼스크라운' 2품종을 이용하여 착과 45일, 50일, 55일 및 60일 후로 4처리하였다. '피엠알달고나' 품종에서 11-13마디 이상 착과 시, 엽폭28.2cm, 엽면적은 10,845㎠로 가장 컸다. 줄기 길이는 '얼스아이비' 품종에서 11-13마디 착과 시 147.6cm로 가장 길었다. 과중은 '얼스아이비' 품종에서 11-13마디 착과시 2.0kg으로 가장 컸다. 과실의 가용성 고형물 함량(SSC)은 '피엠알달고나' 품종에서 8-10 마디 착과시 14.5°Brix, 24 마디 적심시 14.0°Brix로 각각 유의성 있게 가장 높았다. 착과 절위가 낮아질수록 SSC값이 증가하는 경향이 두 품종에서 동일하게 나타났다. '피엠알달고나'와 '얼스크라운' 2품종 모두 착과 55-60일 후 수확된 과실의 SSC 값과 과중이 가장 우수하였다. 종합적으로 검토하면 대부분 SSC값은 착과 절위가 낮아지고 적심 절위가 높아질수록 증가하고, 과중은 착과 절위가 높아질수록 증가하는 경향을 보였다. 착과 후 일수가 증가할수록 과실의 SSC값이 증가하였으며 다양한 품종에 대한 추가 연구가 더 필요하다고 생각되었다. 따라서 코이어 배지를 이용한 수경재배 시 멜론 품종 별로 특성을 잘 파악하여 착과 절위, 적심 절위 및 과실 수확시기를 설정하여야 한다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.354-365
• /
• 2015

This work presents an Internet of Things (IoT) system for home energy management based on a custom-designed Impulse Radio Ultra-Wideband (IR-UWB) transceiver that targets a generic and multi-standard control system. This control system enables the interoperability of heterogeneous devices: it integrates various sensor nodes based on ZigBee, EnOcean and UWB in the same middleware by utilizing an ad-hoc layer as an interface between the hardware and software. The paper presents as a first the design of the IR-UWB transceiver for a portable sensor node integrated with the middleware layer, and also describes the receiver connected to the control system. The custom-designed low-power transmitter on the sensor node is fabricated with 130 nm CMOS technology. It generates a signal with a 1.1 ns pulse width while consuming $39{\mu}W$ at 1 Mbps. The UWB sensor node with a temperature measurement capability consumes 5.31 mW, which is lower than the power level of state-of-the-art solutions for smart-home applications. The UWB hardware and software layers necessary to interface with the control system are verified in over-the-air measurements in an actual office environment. With the implementation of the presented sensor node and its integration in the energy management system, we demonstrate achievement of the broad flexibility demanded for IoT.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.11-18
• /
• 1997

회로 시뮬레이터를 이용하는 DC 셀 노드전압 분석방법을 적용하여, 고저항 SRAM 셀 구조에서 기생저항들과 트랜지스터 비대칭에 의해 야기되는 정적 읽기동작에서의 동작마진을 조사하였다. 이상적인 셀에 기생저항을 선택적으로 추가함으로써 각 기생저항들이 동작 마진에 끼치는 영향을 조사한 뒤, 기생저항이 좌우대칭 쌍으로 존재하는 경우에 대해 조사하고, 또한 셀 트랜지스터의 채널폭을 선택적으로 변화시켜 트랜지스터의 비대칭을 야기시킴으로써 트랜지스터 비대칭에 의한 동작 마진의 저하를 분석하였다. 분석 방법은 시뮬레이션된 셀 노드전압 특성에서 두 셀 노드전압이 하나의 값으로 수렴되는 전원전압의 값과 $V_{DD}=5V$에서 셀 노드전압의 차를 비교함으로써 상대적인 동작 마진을 비교하는 방법을 사용하였다. 회로 시뮬레이션에 의존한 본 분석으로부터 셀의 정적 읽기동작에 가장 심각한 영향을 끼치는 기생저항 성분과 트랜지스터의 비대칭 형태를 규명함으로써 새로운 셀 구조 설계시 참고할 수 있는 기준을 제시하였다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.395-411
• /
• 1993

The purpose of this study was to examine the clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, the cavities were prepared on maxillary first premolar and filled with gold inaly. A two - dimensional model was composed of 1037 - node triangle elements. In this model, isthmus was varied in width at 1/4, 1/3 and 1/2 of intercuspal width and material properties were given for four element groups, i.e., enamel, dentin, pulp and gold. The 500N occlusal load varied in direction and it was examined using three types of load : concentrated load, divided load and distributed load. The models were also examined with empty cavities using the devided load and distributed load. These models were analyzed the displacement and strees distribution by the two - dimensional Finite Element Method. The results were as follows : 1. All experimental models which filled with gold inlay after cavity preparation were similar direction of displacement with control model under same load type. But in the models with empty cavities, as isthmus width was wider, the degree of displacement was increased at same load type. 2. Among the experimental models which were filled with gold inaly after cavity preparation, the model II showed the least stress concentration under concentrated load and divided load. But in the models with empty cavities, the model III showed the largest stress concentration and tooth fracture is expected regardless isthmus width. 3. All experimental models showed similar displacement pattern beneath restorative material under a concentrated load. In the models with empty cavities, a divided load resulted in a lingual displacement of the lingual cusp, but a distributed load resulted in a buccal displacement of the lingual cusp. In regard to the above results, the restored models were stronger than empty models in respect to the bending moment and tensile stress. The empty models are expected to fracture regardless isthmus width. The safest isthmus width was 1/3 of intercuspal distance, which showed the least stress concentration in respect to the effect of stress distribution.

• 제어로봇시스템학회논문지
• /
• 제17권8호
• /
• pp.731-738
• /
• 2011

In this paper, we introduce an advanced architecture of K-Means clustering-based polynomial Radial Basis Function Neural Networks (p-RBFNNs) designed with the aid of SSOA (Space Search Optimization Algorithm) and develop a comprehensive design methodology supporting their construction. In order to design the optimized p-RBFNNs, a center value of each receptive field is determined by running the K-Means clustering algorithm and then the center value and the width of the corresponding receptive field are optimized through SSOA. The connections (weights) of the proposed p-RBFNNs are of functional character and are realized by considering three types of polynomials. In addition, a WLSE (Weighted Least Square Estimation) is used to estimate the coefficients of polynomials (serving as functional connections of the network) of each node from output node. Therefore, a local learning capability and an interpretability of the proposed model are improved. The proposed model is illustrated with the use of nonlinear function, NOx called Machine Learning dataset. A comparative analysis reveals that the proposed model exhibits higher accuracy and superb predictive capability in comparison to some previous models available in the literature.

• 한국강구조학회 논문집
• /
• 제23권4호
• /
• pp.455-464
• /
• 2011

본 논문에서는 곡선 보강 복부판의 좌굴해석을 대체전단변형률 장을 갖는 8, 9절점 평면 쉘요소를 이용한 유한요소해석을 통하여 수행하였다. 수평보강재 및 수직보강재를 갖는 경우의 수직면내 곡선 복부판의 좌굴거동을 조사하기 위해 면내 모멘트 하중을 받는 경우에 대해서 복부판의 폭(b)의 변화, 보강재와 복부판의 휨-강성비(${\gamma}=EI/bD$)의 변화에 대한 변수연구를 수행하였다. 보강재를 갖지 않는 경우의 수직면내 곡선 복부판의 정적거동에 대해서도 조사되었다. 또한 모멘트 하중을 받는 경우에서 수평 보강재 및 수직 보강재의 좌굴능력이 비교 되었다.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2015

In this paper, a 12-bit high resolution, power and area efficiency hybrid digital pulse width modulator (DPWM) with process and temperature (PT) calibration has been proposed for digital controlled DC-DC converters. The hybrid structure of DPWM combines a 6-bit differential tapped delay line ring-mux digital-to-time converter (DTC) schema and a 6-bit counter-comparator DTC schema, resulting in a power and area saving solution. Furthermore, since the 6-bit differential delay line ring oscillator serves as the clock to the high 6-bit counter-comparator DTC, a high frequency clock is eliminated, and the power is significantly saved. In order to have a simple delay cell and flexible delay time controllability, a voltage controlled inverter is adopted to build the deferential delay cell, which allows fine-tuning of the delay time. The PT calibration circuit is composed of process and temperature monitors, two 2-bit flash ADCs and a lookup table. The monitor circuits sense the PT (Process and Temperature) variations, and the flash ADC converts the data into a digital code. The complete circuits design has been verified under different corners of CMOS 0.18um process technology node.

• 한국지역사회생활과학회지
• /
• 제24권3호
• /
• pp.399-409
• /
• 2013

The purpose of this study is to compare how the number of panels, the amount of flare and the flare starting point affect the silhouette of the gored skirt. This study consisted of (1) creation of 3D body representations (2) comparison of silhouette between 3D virtual gored skirt and actual gored skirt by pilot experiment (3) pattern drafting of twenty-seven different gored skirts for 3D body representations (4) a computer simulation of twenty-seven different gored skirts for visualization and assessment (5) visual inspection of twenty-seven different 3D virtual gored skirts (6) comparison of ham shapes and measurements for the node and size analysis. A visual inspection of twenty-seven different 3D virtual gored skirts showed clear differences by the amount of flare and the flare starting point ; however, there was notably less difference in the width of ham among six-piece, eight-piece and ten-piece panels. This demonstrated that there was less influence on the number of panels than the amount of flare width of ham and extent of ham for the 3D virtual gored skirt.