• 폴리머
• /
• 제29권2호
• /
• pp.156-160
• /
• 2005

Octamethylcyclotetrasiloxane$(D_4)$과 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane$(D_3^{Me,Ph)$을 1,1,3,3-tetramethyl-1,3-divinyldisiloxane(MVS)과 평형중합시켜 실리콘의 Si원자에 dimethyl 및 methylphenyl기가 도입된 $\alpha,\omega-vinyl$ poly(dimethyl-methylphenyl) siloxane prepolymer(VPMPS)를 제조하였으며, 또한 $D_4$와 1,3,5-trimethylcyclotrisiloxane$(D_3^:Me,H})$을 1,1,3,3-tetramethyldisiloxane(MS)와 평형중합시켜 Si원자에 dimethyl 및 methylhydrogen기가 도입된 $\alpha,\omega-hydrogen$ poly (dimethyl-methyl) siloxane prepolymer(HPDMS)를 제조하였다. Poly(acrylic acid)(PAA)을 chelating agent로 하여 nickel(II) nitrate와 iron(III) nitrate를 솔-젤 방법으로 PAA 금속염을 제조하고 이틀을 소결시켜 nickel ferrite 나노 입자를 제조하였다. 제조한 nickel ferrite는 XRD 패턴으로 확인하고 입자의 크기를 TEM으로 측정하였다 1,3-Divinyltetramethyldisilazane(VMS)으로 표면처리한 나노 실리카, nickel ferrite, VPMPS, HPDMS 및 촉매를 고속 교반기에 가하고 $130^{\circ}C$에서 컴파운딩하여 poly(organosiloxane) rubber nanocomposites를 제조하였다. Nickel ferrite 함유한 nanocomposite, POX-30과 POX-50을 각각 제조하였으며 이들의 기계적 및 열전도 특성 그리고 체적 저항을 측정하였다.

• 한국재료학회지
• /
• 제10권6호
• /
• pp.445-449
• /
• 2000

가압 경수형 원자로 (pressurized light water reactor) 냉각재 계통 내의 주된 분식 생성물로 알려져 있는 nickel ferrite의 거동에 대해 고찰하기 위해 모의 nickel ferrite($Ni_{0.75}Fe_{2.25}O_4$)를 공침법으로 제조하였다. 수용액-pH-조절로는 am-monia 또는 potassium carbonate를, 공침물-세척제는 ammonia 수용액이나 potassium carbonate 수용액 또는 2차 증류수를 사용하였다. Nickel ferrite의 생성 및 수용액-pH-조절제와 공치물-세척제가 최종 생성물의 Ni-Fe 몰 비에 따른 수율 및 특성에 미치는 영향은 EDX, XPS, XRD 및 SEM으로 고찰하였다. 반응 전.후 Ni/Fe 몰 비에 따른 수율은, pH를 potassium carbon-ate로 조절한 후 2차 증류수로 공침물을 세척한 경우가 0.994로 가장 높이 나왔으며, pH-조절제로 potassium carbonate를 사용한 경우가 ammonia를 사용한 경우에 비해 높은 수율을 나타냈다. 이러한 차이는 공침 시에 수용액 내에서 ammonia가 보여주는 상대적으로 큰 $Na_{2+}{\leftarrow}NH_3$ 착화 효과와 더불어 공침물-세척제의 pH에 기인하는 것으로 해석하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.357-362
• /
• 1997

PWR 원전 계획 예방정비 기간 중에는 Crud 제거를 위한 정지화학 제어가 수행되고 있으나, 불시정지시 화학제어에 대한 접근은 거의 전무하다. 이에, 정지시 냉각재화학 변화에 따른 Nickel Ferrite의 안정성에 대해 검토하고, 불시정지시 냉각재 화학제어의 방향을 도출하였다. 계획정지 화학제어가 가능한 불시정지시에는 Nickel Ferrite 용출 증대를 위한 조기 붕산화와 고농도 용존수소 (Fig. 1 참조) 유지 및 산성-산화 단계의 도입이, 적용이 불가능한 경우에는 Nickel Ferrite 용출 억제를 위한 붕산화 연기 및 용존수소의 저농도 유지가 타당할 것이다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.554-558
• /
• 2016

The solubility of nickel ferrite in an aqueous solution of boric acid was studied by varying the pH at the temperatures ranging from $25^{\circ}C$ to $320^{\circ}C$. A flow-through autoclave system was specially designed and fabricated to measure the solubility of Fe in hydrothermal solutions under high temperature and pressure. The performance of this flow-through system was directly compared with the conventional static state technique using a batch-type autoclave system. The stability of fluid velocity for the flow-through autoclave system was verified prior to the solubility measurement. The influence of chemical additives, such as boric acid and $H_2$, on the solubility of nickel ferrite was also evaluated.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.59-63
• /
• 2014

Nano-sized nickel substituted cobalt ferrite powders, $Ni_xCo_{1-x}Fe_2O_4$ ($0.0{\leq}x{\leq}1.0$), were fabricated by the sol-gel method, and their crystallographic and magnetic properties were studied. All the ferrite powders showed a single spinel structure, and behaved ferrimagnetically. When the nickel substitution was increased, the lattice constants and the sizes of particles of the ferrite powders decreased. The M$\ddot{o}$ssbauer absorption spectra of $Ni_xCo_{1-x}Fe_2O_4$ ferrite powders could be fitted with two six-line subspectra, which were assigned to a tetrahedral A-site and octahedral B-sites of a typical spinel crystal structure. The increase in values of the magnetic hyperfine fields indicated that the superexchange interaction was stronger, with the increased nickel concentration in $Ni_xCo_{1-x}Fe_2O_4$. This could be explained using the cation distribution, which can be written as, $(Co_{0.28-0.28x}Fe_{0.72+0.28x})[Ni_xCo_{0.72-0.72x}Fe_{1.28-0.28x}]O_4$. The two values of the saturation magnetization and the coercivity decreased, as the rate of nickel substitution was increased. These decreases could be explained using the cation distribution, the magnetic moment, and the magneto crystalline anisotropy constant of the substituted ions.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1334-1339
• /
• 2018

Spherical nickel ferrite nanoparticles were synthesized using the thermal decomposition method and coated with cetyl trimethyl ammonium bromide (CTAB) after the synthesis. Transmission electron microscopy images showed that the average diameter of the particles was 9.40 nm. The status of the CTAB-coating on the surface of the particles was checked using Fourier-transform infrared spectroscopy. Their hysteresis curve showed that the particles exhibited a superparamagnetic behavior. The $T_1$ and the $T_2$ relaxations of the nuclear spins were observed in aqueous solutions of the particles with different particles concentrations by using a magnetic resonance imaging (MRI) scanner, which showed that the $T_1$ and the $T_2$ relaxivities of the particles in water were $0.57mM^{-1}{\cdot}s^{-1}$ and $10.42mM^{-1}{\cdot}s^{-1}$, respectively. In addition, using an induction heating system, we evaluated their potentials for magnetic hyperthermia applications. The aqueous solution of the particles with a moderate concentration (smaller than 6.5 mg/mL) showed a saturation temperature larger than the hyperthermia target temperature of $42^{\circ}C$. These findings show that the CTAB-coated nickel ferrite particles are suitable for applications as $T_2$ contrast agents in MRI and heat generators in magnetic hyperthermia.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.25-29
• /
• 2003

자외선과 전자파를 동시에 차단하는 선글라스렌즈를 제작하기 위하여 유리가판 위에 자성재료인 페라이트에 Ni를 여러 가지 조성비로 첨가한 니켈페라이트 박막 $Ni_xFe_{3-x}O_4$을 페라이트 도금법으로 제작하였다. 이들은 모두 스피넬 구조의 단일상임을 확인할 수 있었으며 육안으로 관찰할 때 거울면과 같은 광택을 가졌으며, 손톱으로 긁었을 때 흠집이 생기지 않는 강도를 보였다. 니켈페라이트는 400nm 부근에서부터 급격히 투과율이 떨어져 자외선을 차단하는데 효과적인 양상을 보이고 있으며 그 중에서 x = 0.09의 Ni 조성비가 자외선 차단효과가 가장 좋은 깃으로 나타났다. 이는 타사제품과 비교하여 자외선 차단효과는 크게 떨어지지 않으므로, 전자파 차단효과가 있는 $Ni_xFe_{3-x}O_4$ 페라이트를 코팅한 선글라스를 착용함으로서 유해전자파와 자외선을 동시에 차단하는 효과를 얻을 수 있을 것이다.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.49-54
• /
• 2012

The microstructure and mechanical properties of the high-strength low-alloy steel weld metals with a variation of nickel content were investigated. The weld metals with a variation of nickel content from 2.3 to 3.3 wt% were prepared using Gas Metal Arc Welding process. The amount of acicular ferrite decreased with increasing nickel content; this is accompanied with an increase in the region of bainite and martensite, hence the hardness and tensile strengths were increased with the increase in nickel content, whereas the impact energy was deteriorated.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.40-45
• /
• 2016

Nickel substituted nano-sized ferrite powders, $Co_{1-x}Ni_xFe_2O_4$, $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$), were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently compared. The lattice constants decreased as quantity of nickel substitution increased, while the particle size decreased in $Co_{1-x}Ni_xFe_2O_4$ ferrite but increased for the $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites. For the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$) ferrite powders, the $M{\ddot{o}}ssbauer$ spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of $Mn_{0.8}Zn_{0.1}Ni_{0.1}Fe_2O_4$ consisted of two Zeeman sextets and one single quadrupole doublet due to the ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explain the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. The saturation magnetization decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. The coercivity decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. These variations could thus be explained by using the site distribution equations, particle sizes and spin magnetic moments of the substituted ions.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.64-70
• /
• 2004

Cryogenic characteristics of austenitic stainless steel based on 304 steel with nickel and nitrogen were investigated at room temperature and $-196^{\circ}C$. The alloys were fabricated by vacuum arc furnace and cold working after homogenization treatment. The addition of nickel and nitrogen decreased the stability of $\delta$-ferrite and induced the stability against the formation of martensite to result significantly in enhancing ductility at $-196^{\circ}C$. Nitrogen reduced Md temperature, which was beneficial to the tensile strength and elongation at $25^{\circ}C$ and -196$^{\circ}C$.