Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Ni on the Microstructure and Mechanical Properties of HSLA Steel Welds

고강도 저합금강 용접금속의 미세조직과 기계적 특성에 미치는 니켈 함량의 영향

  • Kang, Yong-Joon (Division of Materials Science and Engineering, Hanyang University) ;
  • Jang, Ji-Hun (Division of Materials Science and Engineering, Hanyang University) ;
  • Park, Sang-Min (Research & Development Dept., Pohang Plant, Hyundai Welding) ;
  • Lee, Chang-Hee (Division of Materials Science and Engineering, Hanyang University)
  • Received : 2012.08.08
  • Accepted : 2012.08.29
  • Published : 2012.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

The microstructure and mechanical properties of the high-strength low-alloy steel weld metals with a variation of nickel content were investigated. The weld metals with a variation of nickel content from 2.3 to 3.3 wt% were prepared using Gas Metal Arc Welding process. The amount of acicular ferrite decreased with increasing nickel content; this is accompanied with an increase in the region of bainite and martensite, hence the hardness and tensile strengths were increased with the increase in nickel content, whereas the impact energy was deteriorated.

Keywords

References

  1. S. Y. Shin, S. Y. Han, B. Hwang, C. G. Lee, S. Lee : Materials Science and Engineering A, 517 (2009), 212 https://doi.org/10.1016/j.msea.2009.03.052
  2. J. Y. Koo, M. J. Luton, N. V. Bangaru, R. A. Petkovic : Proc. of ISOPE-2003, (2003), 10
  3. E. Levine, D. C. Hill : Metallurgical Transactions A, 8A (1977), 1453
  4. R. A. Farrar, P. L. Harrison : Journal of Materials Science, 22 (1987), 3812 https://doi.org/10.1007/BF01133327
  5. S. Ohkita, Y. Horii : ISIJ International, 16 (1995), 1170
  6. J. S. Byun, J. H. Shim, J. Y. Suh, Y. J. Oh, Y. W. Cho, J. D. Shim, D. N. Lee : Materials Science and Engineering A, 319 (2001), 326 https://doi.org/10.1016/S0921-5093(00)02014-1
  7. J. S. Lee, S. H. Jeong, D. Y. Lim, J. O. Yun, M. H. Kim : Metals and Materials International, 16 (2010), 827 https://doi.org/10.1007/s12540-010-1021-8
  8. J. Lee, S. Kim, B. Yoon, H. Kim, S. Kil, C. Lee : Journal of KWJS, 29-1 (2011), 65 (in Korean)
  9. D. H. Kang, H. W. Lee : Metals and Materials International, 17 (2011), 963 https://doi.org/10.1007/s12540-011-6015-7
  10. W. W. Bose-Filho, A. L. M. Carvalho, M. Strangwood : Materials Characterization, 58 (2007) 29 https://doi.org/10.1016/j.matchar.2006.03.004
  11. J. C. F. Jorge, L. F. G. Souza, J. M. A. Rebello : Materials Characterization, 47 (2001) 195 https://doi.org/10.1016/S1044-5803(01)00168-1
  12. R. A. Farrar, Z. Zhang, S. R. Bannister, G. S. Barritte : Journal of Materials Science, 28 (1993), 1385
  13. S. Liu, D. L. Olson : Journal of Materials Engineering, 9 (1987), 237 https://doi.org/10.1007/BF02834144
  14. S. H. Kim, C. Y. Bang. K. S. Bang : Journal of Materials Science, 36 (2001), 1197 https://doi.org/10.1023/A:1004890027527
  15. W. Wang, S. Liu : Welding Journal, 81 (2002), 132
  16. D. S. Taylor, G. M. Evans : Metal Construction, 15 (1983), 438
  17. H. J. T. Ellingham : Journal of the Society of Chemical Industry, 63 (1944), 125 https://doi.org/10.1002/jctb.5000630501
  18. A. A. B. Sugden, H. K. D. H. Bhadeshia : Metallurgical Transactions A, 20A (1989), 1811
  19. J. W. Martin, R. W. Doherty : Cambridge University Press
  20. A. F. Gourgues, H. M. Flower, T. C. Lindley : Materials Science and Technology, 16 (2000), 26 https://doi.org/10.1179/026708300773002636