• 한국해안해양공학회지
• /
• 제7권3호
• /
• pp.227-232
• /
• 1995

크노이드파의 발생에 필요한 Jacobian 매개변수 산정에 관한 새로운 방법이 제안되었다. 제안된 방법에서는 수심, 파고 및 파의 주기 또는 파장이 주어지면, Newton-Raphson 방법과 산술 및 기하평균방법을 이용하여 기존의 시행착오법과 비교하여 과정은 더욱 단순하면서도 동일한 정밀도를 갖는 결과를 제공한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.364-373
• /
• 2001

This paper describes the variation of lubricant's temperature effects on elastohydrodynamic lubrication. The Newton-Raphson technique was used to solve the simultaneous system of Reynolds and elasticity equations. To show effects of lubricant's temperature, average temperature across the oil film was calculated using the energy equation. Pressure distribution, film shape, and temperature distribution were obtained for fully flooded conjunctions, and various dimensionless speed parameters while load and material parameters were held constant. Minimum film thickness were obtained for various material properties while load and velocity were held constant. It is drawn that the thermal effects have a strong influence on a minimum film thickness under high rolling velocity and slip ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.388-391
• /
• 2006

In the development of sheet-handling machinery, it is important to predict the static and dynamic behavior of the sheets with a high degree of reliability because the sheets are fed and stacked at such a high speed. Flexible media behaves geometric nonlinearity of large displacement and small strain. In this paper, static and dynamic analyses of flexible media are performed by FEM considering geometric nonlinearity. Linear stiffness matrix and geometric nonlinear stiffness matrix based on the Co-rotational(CR) approach are derived and numerical simulations are performed by Updated Newton-Raphson(UNR) method and Newmark integration scheme.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.123-128
• /
• 2004

In electrical impedance tomography (EIT), the internal resistivity distribution of the unknown object is computed using the boundary voltage data induced by different current patterns using various reconstruction algorithms. This paper presents a new image reconstruction algorithm based on the genetic algorithm (GA) via a two-step approach for the solution of the EIT inverse problem, in particular for the reconstruction of "static" images. The computer simulation for the 32 channels synthetic data shows that the spatial resolution of reconstructed images in the proposed scheme is improved compared to that of the modified Newton-Raphson algorithm at the expense of an increased computational burden.rden.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.443-451
• /
• 2005

The studied in this paper is a new algorithm for searching the maximum likelihood estimate(MLE) in which probability density function is not explicitly expressed. Newton-Raphson's root-finding routine and a nonlinear numerical optimization algorithm with constraint (so-called feasible sequential quadratic programming) are used. This algorithm is applied to the Wakeby distribution which is importantly used in hydrology and water resource research for analysis of extreme rainfall. The performance comparison between maximum likelihood estimates and method of L-moment estimates (L-ME) is studied by Monte-carlo simulation. The recommended methods are L-ME for up to 300 observations and MLE for over the sample size, respectively. Methods for speeding up the algorithm and for computing variances of estimates are discussed.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.183-191
• /
• 1998

There are many available algorithms based on the different approaches to solve the intersection problems between two curves. Among them, the implicitization method is frequently used since it computes precise solutions fast and is robust in lower degrees. However, once the degrees of curves to be intersected are higher than cubics, its computation time increases rapidly and the numerical stability gets worse. From this observation, it is natural to transform the original problem into a set of easier ones. Therefore, curves are subdivided appropriately depending on their geometric behavior and approximated by a set of rational quadratic Bezier cures. Then, the implicitization method is applied to compute the intersections between approximated ones. Since the solutions of the implicitization method are intersections between approximated curves, a numerical process such as Newton-Raphson iteration should be employed to find true intersection points. As the seeds of numerical process are close to a true solution through the mix-and-match process, the experimental results illustrates that the proposed algorithm is superior to other algorithms.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.55-65
• /
• 2006

이 논문에서는 캔틸레버 공법으로 시공되는 대칭형 강 사장교의 폐합해석법을 제안한다. 폐합시공 전에는 폐합단면 양쪽에서 두개의 독립적인 구조계가 성립되기 때문에 폐합단면에 적절한 단면력을 가해 주어야만 폐합단면에서 수직 처짐과 회전각에 대한 적합조건을 만족시킬 수 있다. 그러나 실제 시공에서는 폐합단면에 단면력을 재하하는 것이 거의 불가능하기 때문에 시공 중에 실제로 교량에 재하할 수 있는 외력에 의하여 적합조건을 만족시켜야 한다. 이 논문에서는 몇 개 케이블의 무응력 길이와 데릭 크레인의 인양력을 조정하여 적합조건을 만족시킬 수 있는 해석 방법을 제안한다. 적합조건식은 케이블의 무응력 길이와 크레인 인양력에 대하여 비선형이므로 Newton-Raphson 방법에 의하여 반복적으로 푼다. 케이블 부재는 탄성현수선 요소를 사용하여 모델링하였고, 주탑과 거더는 일반적인 3차원 뼈대요소를 사용하여 이산화하였다. 교량의 케이블 무응력 길이와 인양력에 대한 변위 민감도는 평형방정식을 직접 미분하여 계산하였다. 주어진 신뢰도 구간에서 시공 오차를 예측하기 위한 몬테-카를로 모사법을 제안하였다. 제안된 방법을 제 2 진도대교의 폐합시공에 적용하여 그 타당성과 효율성을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.557-562
• /
• 1991

In this paper, we present new methods for solving the inverse kinematics associated with 6 degree of freedoms manipulator by the numerical method. This method will be based on tracking stability of special nonlinear dynamical systems, and differs from the typical techniques based by the Newton-Gauss or Newton-Raphson method for solving nonlinear equations. This simulation results show that the new method is solving the inverse kinematics of PUMA 560 without the derivative of a given task space trajectories.

• Journal of the Korean Statistical Society
• /
• 제33권4호
• /
• pp.401-410
• /
• 2004

We address the problem of parameter estimation in multivariate distributions under ignorable non-monotone missing data. The factoring likelihood method for monotone missing data, termed by Rubin (1974), is extended to a more general case of non-monotone missing data. The proposed method is algebraically equivalent to the Newton-Raphson method for the observed likelihood, but avoids the burden of computing the first and the second partial derivatives of the observed likelihood. Instead, the maximum likelihood estimates and their information matrices for each partition of the data set are computed separately and combined naturally using the generalized least squares method.

• Journal of the Korean Statistical Society
• /
• 제9권1호
• /
• pp.13-29
• /
• 1980

The statistical theory of factor analysis is briefly reviewed with emphasis on the maximum-likelihood method. A modified version of Joreskog(1975) is used for the implementation of the maximum-likelihood method. For the minimization of the conditional minimum function, an adaptive Newton-Raphson method is applied.