• Title/Summary/Keyword: new strain

Search Result 2,128, Processing Time 0.023 seconds

A Study on Bearing Capacity for Installed Rammed Aggregate Pier (RAP의 배치형태에 따른 지지력에 관한 연구)

  • Kim, Younghun;Cho, Changkoo;Chun, Byungsik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.10 no.5
    • /
    • pp.19-26
    • /
    • 2009
  • Rammed Aggregate Pier (RAP) method is intermediate foundation between deep and shallow foundation, and it has been built in world wide. RAP represents a relatively new method that has grown steadily over 19 years since Geopier of USA developed this revolutionary method in 1989. The investigation and research in domestic is not accomplished. In this paper, the examined details of different spacing of piles, bearing capacities, respectively, conclude with recommendations on how RAP can be used in future needs. This documentation further provides comparisons of the laboratory test results which were obtained from changing the spacing of piles, namely installed rammed aggregate pier. Laboratory model test was administered in a sand box. Strain control test was conducted to determine the bearing capacities of the piers; 20 mm, 30 mm and 40 mm RAP in diameter using drilling equipment to make holes were installed in sand at initial relative densities of 40%. By comparing different spacing of piles, in this experiment, piles are spaced structually span, form a ring shape, narrowing the distance of each other, to the center. the result shows that as diameter of pier is bigger in diameter, bearing capacity also dramatically increased due to raised stiffness. Also, as the space between each piers was closed, the settlement rate of soil was decreased significantly. From the test results, as the space between each piles were getting closer, it allows greater chances to have more resistance to deformation, and shows more improved stability of structures. After from the verification work which is continuous leads the accumulation of the site measuring data which is various, and bearing capacity and the settlement is a plan where the research will be advanced for optimum installed RAP.

  • PDF

Active and Passive Suppression of Composite Panel Flutter Using Piezoceramics with Shunt Circuits (션트회로에 연결된 압전세라믹을 이용한 복합재료 패널 플리터의 능동 및 수동 제어)

  • 문성환;김승조
    • Composites Research
    • /
    • v.13 no.5
    • /
    • pp.50-59
    • /
    • 2000
  • In this paper, two methods to suppress flutter of the composite panel are examined. First, in the active control method, a controller based on the linear optimal control theory is designed and control input voltage is applied on the actuators and a PZT is used as actuator. Second, a new technique, passive suppression scheme, is suggested for suppression of the nonlinear panel flutter. In the passive suppression scheme, a shunt circuit which consists of inductor-resistor is used to increase damping of the system and as a result the flutter can be attenuated. A passive damping technology, which is believed to be more robust suppression system in practical operation, requires very little or no electrical power and additional apparatuses such as sensor system and controller are not needed. To achieve the great actuating force/damping effect, the optimal shape and location of the actuators are determined by using genetic algorithms. The governing equations are derived by using extended Hamilton's principle. They are based on the nonlinear von Karman strain-displacement relationship for the panel structure and quasi-steady first-order piston theory for the supersonic airflow. The discretized finite element equations are obtained by using 4-node conforming plate element. A modal reduction is performed to the finite element equations in order to suppress the panel flutter effectively and nonlinear-coupled modal equations are obtained. Numerical suppression results, which are based on the reduced nonlinear modal equations, are presented in time domain by using Newmark nonlinear time integration method.

  • PDF

Classification of Bacteriophage of Lactobacillus Casei Strain S-1 (Lactobacillus casei S-1 균주의 Bacteriophage 분류)

  • Kim, Young-Ki;Baek, Young-Jin;Bae, Hyung-Seok;Yoo Min
    • Microbiology and Biotechnology Letters
    • /
    • v.13 no.3
    • /
    • pp.265-271
    • /
    • 1985
  • The classification of bacteriophage could be followed by several criteria. In this study three criteria were used for classification of Lactobacillus casei bacteriophag. In serological classification. antiserum was prepared by rabbit and used for classification. The inactivation effect of phage by antiserum was exponential and L. casei phage was classified in to three serological groups by inactivation rate (K-values). The Lac Y group was proved as a new serological group but the Lac J and Lac S group were shown the same results as previous reports. From the comparison of restriction enzyme pattern of phage DNA, Lac J group was divided into four sub-groups. According to the difference of host range, Lac J-II group was further subdivided into three groups. These results were shown that L. casei strains S-1 bacteriophage was classified into 8 sub-groups. The phage YK of Lac Y group was shown to consist of a icosahedral head about 95nm in diameter, a contractile tail about 150nm in length and 20nm in width. The tail of YK phage is composed of stacked disks(4nm repeat)and a hexagonal baseplate. The molecular weight of YK phage DNA was approximately 85.6 Mdalton.

  • PDF

Development of Artificial Intelligence Joint Model for Hybrid Finite Element Analysis (하이브리드 유한요소해석을 위한 인공지능 조인트 모델 개발)

  • Jang, Kyung Suk;Lim, Hyoung Jun;Hwang, Ji Hye;Shin, Jaeyoon;Yun, Gun Jin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.48 no.10
    • /
    • pp.773-782
    • /
    • 2020
  • The development of joint FE models for deep learning neural network (DLNN)-based hybrid FEA is presented. Material models of bolts and bearings in the front axle of tractor, showing complex behavior induced by various tightening conditions, were replaced with DLNN models. Bolts are modeled as one-dimensional Timoshenko beam elements with six degrees of freedom, and bearings as three-dimensional solid elements. Stress-strain data were extracted from all elements after finite element analysis subjected to various load conditions, and DLNN for bolts and bearing were trained with Tensorflow. The DLNN-based joint models were implemented in the ABAQUS user subroutines where stresses from the next increment are updated and the algorithmic tangent stiffness matrix is calculated. Generalization of the trained DLNN in the FE model was verified by subjecting it to a new loading condition. Finally, the DLNN-based FEA for the front axle of the tractor was conducted and the feasibility was verified by comparing with results of a static structural experiment of the actual tractor.

Isolation and Characterization of the Mutants in the Genes Involved in Mating Pheromone Signalling (효모의 mating pheromone 신호전달과정에 관여하는 유전자의 돌연변이 분리 및 분석)

  • Kim, Ji-Hye;Kim, Hwan-Gyu;Jahng, Kwang-Yeop
    • The Korean Journal of Mycology
    • /
    • v.19 no.4
    • /
    • pp.266-275
    • /
    • 1991
  • The gene CDC70 encoding the${\alpha}-subunit$ of G protein has been known to be a component involved in mating pheromone signalling in the yeast, Saccharomyces cerevisiae. To isolate mutations of the genes involved in the signal transduction, Saccharomyces cerevisiae the strain bearing the cdc70-5 mutation was mutagenized to be forced to recover the ability of colony-formation at restrictive temperature, which means the new mutation can suppress the temperature sensitivity of the cdc70-5 phenotypes. Among these suppressors, $sir^-$ and $mat{\alpha}2^{-}$ mutations are excluded because of no relationship to signal transducer. And the selected suppressors were analyzed for the linkage relationships by the tetrad analysis. Out of fifteen suppressors isolated, twelve were classified into four linkage groups, designated as sga1, sga2, sga3, sga4 by the tetrad analysis. The other three genes were determined for the linkage.

  • PDF

Laboratory Validation of Bridge Finite Model Updating Approach By Static Load Input/Deflection Output Measurements (정적하중입력/변위출력관계를 이용한 단경간 교량의 유한요소모델개선기법: 실내실험검증)

  • Kim, Sehoon;Koo, Ki Young;Lee, Jong-Jae
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.20 no.3
    • /
    • pp.10-17
    • /
    • 2016
  • This paper presents a laboratory validation of a new approach for Finite Element Model Updating(FEMU) on short-span bridges by combining ambient vibration measurements with static load input-deflection output measurements. The conventional FEMU approach based on modal parameters requires the assumption on the system mass matrix for the eigen-value analysis. The proposed approach doesn't require the assumption and even provides a way to update the mass matrix. The proposed approach consists of two steps: 1) updating the stiffness matrix using the static input-deflection output measurements, and 2) updating the mass matrix using a few lower natural frequencies. For a validation of the proposed approach, Young's modulus of the laboratory model was updated by the proposed approach and compared with the value obtained from strain-stress tests in a Universal Testing Machine. Result of the conventional FEMU was also compared with the result of the proposed approach. It was found that proposed approach successfully estimated the Young's modulus and the mass density reasonably while the conventional FEMU showed a large error when used with higher-modes. In addition, the FE modeling error was discussed.

Characterization of Ribose-5-Phosphate Isomerase B from Newly Isolated Strain Ochrobactrum sp. CSL1 Producing ʟ-Rhamnulose from ʟ-Rhamnose

  • Shen, Min;Ju, Xin;Xu, Xinqi;Yao, Xuemei;Li, Liangzhi;Chen, Jiajia;Hu, Cuiying;Fu, Jiaolong;Yan, Lishi
    • Journal of Microbiology and Biotechnology
    • /
    • v.28 no.7
    • /
    • pp.1122-1132
    • /
    • 2018
  • In this study, we attempted to find new and efficient microbial enzymes for producing rare sugars. A ribose-5-phosphate isomerase B (OsRpiB) was cloned, overexpressed, and preliminarily purified successfully from a newly screened Ochrobactrum sp. CSL1, which could catalyze the isomerization reaction of rare sugars. A study of its substrate specificity showed that the cloned isomerase (OsRpiB) could effectively catalyze the conversion of $\text\tiny{L}$-rhamnose to $\text\tiny{L}$-rhamnulose, which was unconventional for RpiB. The optimal reaction conditions ($50^{\circ}C$, pH 8.0, and 1 mM $Ca^{2+}$) were obtained to maximize the potential of OsRpiB in preparing $\text\tiny{L}$-rhamnulose. The catalytic properties of OsRpiB, including $K_m$, $k_{cat}$, and catalytic efficiency ($k_{cat}/K_m$), were determined as 43.47 mM, $129.4sec^{-1}$, and 2.98 mM/sec. The highest conversion rate of $\text\tiny{L}$-rhamnose under the optimized conditions by OsRpiB could reach 26% after 4.5 h. To the best of our knowledge, this is the first successful attempt of the novel biotransformation of $\text\tiny{L}$-rhamnose to $\text\tiny{L}$-rhamnulose by OsRpiB biocatalysis.

Suppression Effect of Gray Mold and Late Blight on Tomato Plants by Rhamnolipid B (Rhamnolipid B에 의한 토마토 잿빛곰팡이병과 역병의 억제효과)

  • Ahn, Ji-Ye;Park, Myung-Soo;Kim, Seul-Ki;Choi, Gyung-Ja;Jang, Kyoung-Soo;Choi, Yong-Ho;Choi, Jae-Eul;Kim, In-Seon;Kim, Jin-Cheol
    • Research in Plant Disease
    • /
    • v.15 no.3
    • /
    • pp.222-229
    • /
    • 2009
  • A Pseudomonas strain SG3 producing biosurfactant and showing antifungal and insecticidal activities was isolated from agricultural soil severely contaminated with machine oils. The antagonistic bacterium inhibited mycelial growth of all of the tested fungal pathogens. The fermentation broth of SG3 also effectively suppressed the development of various plant diseases including rice blast, tomato gray mold, tomato late blight, wheat leaf rust, barley powdery mildew and red pepper anthracnose. An antifungal substance was isolated from the fermentation broth of SG3 by ethyl acetate partitioning, silica gel column chromatography and preparative HPLC under the guide of bioassay. The chemical structure of the antifungal substance was determined to be rhamnolipid B by mass and NMR spectral analyses. The antifungal biosurfactant showed a potent in vivo antifungal activity against gray mold and late blight on tomato plants. In addition, rhamnolipid B inhibited mycelial growth of B. cinerea causing tomato gray mold and zoospore germination and mycelial growth of P. infestans causing tomato late blight. Pseudomonas sp. SG3 producing rhamnolipid B could be used as a new biocontrol agent for the control of plant diseases occurring on tomato plants.

Biological Control of Plant Growth Using the Plant Growth-Promoting Rhizobacterium Bacillus mojavensis KJS-3 (Bacillus mojavensis KJS-3를 이용한 식물의 생육촉진 활성연구)

  • Pyo, Jae Sung;Shrestha, Sarmila Amatya;Park, Song Hee;Kang, Jae Seon
    • Journal of Life Science
    • /
    • v.24 no.12
    • /
    • pp.1308-1315
    • /
    • 2014
  • Biological control using the plant growth-promoting Rhizobacterium (PGPR) has received significant attention in recent years. PGPR has been linked with promoting growth in economically important crops, such as potatoes, tomatoes, and rice. Bacillus mojavensis KJS-3 (Moja-3), isolated from food waste, possesses antifungal properties against Aspergillus terreus, A. fumagatus, A. flavus, and Fusarium redolense, and it may have potential in the development of products for industrial applications. The main purpose of this study was to determine the effects of spraying the PGPR Bacillus mojavensis KJS-3 on the growth of altari radish (leaf number, leaf length, leaf weight, root length, and rhizome length, adjacent portion diameter, and weight) and lettuce (leaf number, length, width, and weight). Three different concentrations of the foliar spray treatment of B. mojavensis KJS-3 were applied to the altari radish and lettuce: the recommended standard concentration of $1{\times}10^9cfu/g$, half the standard concentration of $0.5{\times}10^9cfu/g$, and double the standard concentration of $2{\times}10^9cfu/g$). The B. mojavensis strain foliar spray treatment increased the growth of the leaves and roots of the altari radish and increased the growth of the lettuce leaves. For both plants, the recommended concentration of B. mojavensis KJS-3 produced better growth than half the standard concentration, and the growth was similar with the double dose. This study demonstrates positive effects of Moja-3, suggesting it may be a potential new bio-fertilizer for improving the growth of altari radish and lettuce.

Anti-inflammatory Activity of the Galactomannans Produced by a New Fungal Strain Trichoderma erinaceum DG-312 (Trichoderma erinaceum DG-312 신규 곰팡이 균주로부터 생산된 galactomannan의 항염증 활성)

  • Joo Ji-Hoon;Lim Jong-Min;Koo Kwang-Bon;Yun Jong-Won;Choi Jang Won
    • Journal of Life Science
    • /
    • v.15 no.2 s.69
    • /
    • pp.287-292
    • /
    • 2005
  • The crude galactomannans (GMs) were obtained from the culture of a newly isolated fungus Trichoderma erinaceum DG-312 and their anti-inflammatory activity was investigated in mice. The maximum concentrations of mycelial biomass and GMs reached 9.44 g/l, 2.72 g/l at day 3 in a 5-l stirred-tank bioreactor, respectively. The results of Sepharose CL-6B gel chromatography and compositional analysis revealed that the crude GMs contain heterogeneous polysaccharides consisting of $74.9\%$ mannose and $24.1\%$ galactose. The GMs was shown to possess a significant anti-inflammatory activity against acetic acid-induced inflammatory mouse model in a dose-dependent manner, when mice were treated with 100 and 200 mg GMs/kg body weight. The inhibition in vascular permeability $(60.6\%)$ and in writhing response $(62.5\%)$ evidenced an anti-inflammatory activity of the GMs. The marked anti-inflammatory and writhing-lowering properties of the GMs suggest its potential therapeutic use.