• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.234.2-234.2
• /
• 2015

Recently, the electromagnetically-induced transparency (EIT)-like effect in metamaterials has attracted enormous interest. Metamaterial analogs of EIT enable promising applications in slow-light devices, low-loss metamaterial, quantum optics, and novel sensors. In this work, we experimentally and numerically studied a bilayer metamaterial for controllable EIT-like spectral response at microwave frequencies. Bilayer metamaterial consists of two snake-shape resonators (SSRs) with one and two bars. The transmission spectra were measured in a frequency range of 4 - 8 GHz in an anechoic chamber at normal incidence. It is found that two SSRs in the metamaterial are activated in bright modes, and the coupling between two bright modes leads to the EIT-like effect, which results in the enhanced transmission at 5.61 GHz. Furthermore, we confirm that the EIT-like feature could be controlled by adjusting the geometric parameters of metamaterial structure. Our work provides a way to tunable EIT-like effect and various potential applications including filters, sensors, and other microwave devices.

• Journal of Educational Research in Mathematics
• /
• v.24 no.4
• /
• pp.595-605
• /
• 2014

Infinite decimals have an infinite number of digits, chosen arbitrary and independently, to the right side of the decimal point. Since infinite decimals are ambiguous numbers impossible to write them down completely, the infinite decimal representation accompanies unavoidable opaqueness. This article focused the transparent aspect of infinite decimal representation with respect to the completeness axiom of real numbers. Long before the formalization of real number concept in $19^{th}$ century, many mathematicians were able to deal with real numbers relying on this transparency of infinite decimal representations. This analysis will contribute to overcome the double discontinuity caused by the different conceptualizations of real numbers in school and academic mathematics.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.70.2-70.2
• /
• 2012

The night sky in Mongolia is known to be one of the darkest and clearest in Asia. The seasonal dust winds from the Gobi desert, however, might degrade the transparency of the night sky and affect the photometrical quality for astronomical research. In this poster, we present the preliminary results of the first transparency measurement of the night sky in Monglia. The observations are done at Zuunmod located at 25 km south from Ulaanbaatar in 2011 October 26-31. We used a CCD camera (QSI 583s) attached to an 80 mm aperture refractor telescope (William Optics Zentih Star 80 II ED APO). A new supernova, SN2011fe, and a young stellar object, HBC 722, were monitored in order to measure the extinction coefficients. These values in Mongolia are compared with those in other astronomical observatory.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.132-138
• /
• 2022

In this study, a basic study was performed to systematically compare the changes in surface properties according to the post-processing method of the stereolithography (SLA) printing method, which is a photocuring 3D printing method, and to provide information on the post-processing method suitable for the application. Although it was possible to improve some of the transparency of the SLA-type output by regularly changing the irregular microstructure of the surface through polishing, it was difficult to secure sufficient transparency like glass. The change in contact angle characteristics due to grinding showed a tendency to slightly increase as the grinding time increased and the particle size of the sandpaper used was small, but the variation between samples was large and the average contact angle was 77~90°, showing no statistically significant difference. Surface treatment methods other than polishing were tried, and it was confirmed that it was possible to easily and simply improve the transparency by applying a commercially available vehicle scratch remover or silicone oil. In addition, a method for securing high transparency such as glass by using a scratch remover after sequential grinding while reducing the particle size of the sandpaper was proposed. Finally, even after surface treatment through polishing and various methods, it was difficult to secure a contact angle of 90° or more.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.2
• /
• pp.47-60
• /
• 2023

This study proposed to adopt consortium blockchain for the database in the research support system of national R&D projects in order to increase efficiency, to reduce administrative burden, and to promote transparent research environment focusing on servicing researchers. Specifically, storage methods were classified according to data characteristics. First, data that requires integrity and transparency is stored in the blockchain, Second, confidentiality and data that require modification and deletion are stored in the database, Third, data that requires confidentiality, integrity, and transparency at the same time stores the original in the database, and the hash value of the data is separately stored in the blockchain. If research support system adopts blockchain, it is possible to operate the system stably, to share quick exchange of information between research institutes, to reduce administrative burden, to improve transparency of process, to resolve asymmetry of information, and to secure integrity, confidentiality, and availability of data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.1-6
• /
• 2013

This study has focused on transparency recovering of the polycarbonate by polishing its surface for recycling. The polycarbonate has many properties such as excellent mechanical strength, electrical insulating, superior heat resistance to other plastic material and especially good transparency. It has been used as barrier for the traffic noise at the roadside and the greenhouse for the palm house. But the polycarbonate has changed slightly as time goes by 10 years because of exposure to the strong sunlight and oxidization in the atmosphere, as result has lost its transparency. Magnetic assisted polishing has been utilized as an effective polishing method to recover the transparency of polycarbonate. The polycarbonate which has been used for 10 years was adopted as the sample. The first surface roughness of the sample was 1$1.23{\mu}mRa$, $7.5{\mu}mRz(DIN)$ respectively. In the experimental results, it showed that the surface roughness of the polished sample improved $0.013{\mu}mRa$, $0.08{\mu}mRz(DIN)$ from the first surface roughness respectively. The surface roughness get almost back again by magnetic assisted polishing. These results also showed that the magnetic assisted polishing was efficient machining method to reuse the polycarbonate material.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.421-439
• /
• 2016

The present study investigates the effects of semantic transparency on the learning of new words using both behavioral measures and event-related brain potentials. Participants studied novel words with either semantically transparent or opaque definitions while their brain potentials were recorded. Learning performance was assessed with both a lexical decision task and a recall test. The results indicated that transparent novel words were easier to learn than opaque words. More specifically, self-paced learning times were shorter for transparent novel words across three study sessions. Transparent words also elicited reduced N400s compared with opaque words in all sessions. Moreover, lexical decisions to both learned novel words and real words were faster and more accurate within the transparent condition compared to the opaque condition. These results suggest that semantic transparency also plays an important role within word learning, just as within word recognition, further supporting the notion that morphological information is critical within lexical processing.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.289-294
• /
• 2008

어떤 자연언어 문서가 전달하려는 의미는 그 텍스트의 성격에 따라 아주 명확할 수도(예: 뉴스 문서), 아주 불분명할 수도 있다(예: 시). 이 연구는 이러한 '의미의 명확성(semantic transparency)'을 정량적으로 측정할 수 있다고 가정하고, 이 의미의 명확성을 판단하는 데에 단어들의 연쇄(word association)의 확률통계적 성질들이 어떻게 기능하는지에 대해 논한다. 이를 위해 특정 단어가 연쇄체를 형성하면서 발생하는 neighboring frequency와 degeneracy를 중심으로 Markov chain Monte Carlo scheme을 적용하여 의미망('Semantic Hypernetwork')으로 학습시킨 후 문서의 구성 단어들과 그 집합들 간의 연결 상태를 파악하였다. 우리는 의미적으로 그 표상이 분명하게 나뉘는 문서들(뉴스와 시)을 대상으로 이 모델이 어떻게 이들의 의미적 명확성을 분류하는지 분석하였다. Neighboring frequency와 degeneracy, 이 두 속성이 언어구조에서의 의미망 기억과 학습 탐색 기제에 유의한 기질로서 제안될 수 있다. 본 연구의 주요 결과로 1) 텍스트의 의미론적 투명성을 구별하는 통계적 증거와, 2) 문서의 의미구조에 대한 새로운 기질 발견, 3) 기존의 문서의 카테고리 별 분류와는 다른 방식의 분류 방식 제안을 들 수 있다.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.159-164
• /
• 2021

Purpose: We investigated the properties of CLEANBOLUS based on silicone with suitable characteristics for clinical use. Methods: We evaluated the characteristics of CLEANBOLUS and compared the results with the commercial product (Super-Flex bolus). Also, we conducted physical evaluations, including shore hardness, element composition, and elongation break. Transparency was investigated through the measured absorbance within the visible region (400-700 nm). Also, dosimetric characteristics were investigated with surface dose and beam quality. Finally, the volume of unwanted air gap was investigated based on computed tomography images for breast, chin, and nose using Super-Flex bolus and CELANBOLUS. Results: CLEANBOLUS showed excellent physical properties for a low shore hardness (000-35) and elongation break (>1,000%). Additionally, it was shown that CLEANBOLUS is more transparent than Super-Flex bolus. Dosimetric results obtained through measurement and calculation have an electron density similar to water in CLEANBOLUS. Finally, CLEANBOLUS showed that the volume of unwanted air gap between the phantom and each bolus is smaller than Super-Flex bolus for breast, chin, and nose. Conclusions: The physical properties of CLEANBOLUS, including excellent adhesive strength and lower shore hardness, reduce unwanted air gaps and ensure accurate dose distribution. Therefore, it would be an alternative to other boluses, thus improving clinical use efficiency.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.105-111
• /
• 2024

The SLA (Stereolithography Apparatus) method is a type of 3D printing technique predicated on the transformation of liquid photocurable resin into a solid form through UV laser exposure, and its application is increasing in various fields. In this study, we conducted research to enhance the hydrophobicity and transparency of SLA 3D printing surfaces for microfluidic system production. The enhancement of surface hydrophobicity in SLA outputs was attainable through the application of hydrophobic coating methods, but the coating durability under different conditions varied depending on the type of hydrophobic coating. Additionally, to simultaneously achieve the required transparency and hydrophobic properties for the fabrication of microfluidic systems, we applied hydrophobic coatings to the proposed transparency enhancement method from prior research and compared the changes in contact angles. Teflon coating was proposed as a suitable hydrophobic coating method for the fabrication of microfluidic systems, given its excellent transparency and high coating durability in various environmental conditions, in comparison to titanium dioxide coating. Finally, we produced an Electrophoresis of Charged Droplet (ECD) chip, one of the digital microfluidics systems, using SLA 3D printing with the proposed Teflon coating method (Fluoropel 800). Droplet manipulation was successfully demonstrated with the fabricated chip, confirming the potential application of SLA 3D printing technology in the production of microfluidic systems.