• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.146-154
• /
• 2011

The adhesive-tape of a liquid leak film sensor including the alarm system is developed. The sensing film is composed of three layers such as base film layer, conductive line layer, and protection film layer. The thickness of film is 300~500 um, the width is 3.55 cm, and the unit length is 200 m. On the conductive line layer, three conducting lines and one resistive line are formulated by the electronic printing method with a conducting ink of silver-nano size. When a liquid leaks for the electricity to be conducted between the conductive line and the resistive line, the position of leakage is monitored by measuring the voltage varied according to the change of resistance between two lines. The error range of sensing position of 200 m film sensor is ${\pm}1m$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.182.1-182.1
• /
• 2013

Silver (Ag)는 높은 반사율을 가지고 있어 Top-Emission Organic Light Emitting Diode (T-OLED)의 반사전극으로 사용하기 적합하지만 일함수가 낮은 단점 (4.3 eV)을 가지고 있다. 이런 낮은 일함수를 증가시키기 위하여 Ag 박막 표면을 산화시켜 일함수를 증가시키기 위한 연구가 진행중에 있으며, 이 연구에서는 UV로 $O_3$을 발생시켜 Ag 박막 표면을 산화시키기 위한 연구를 진행하였다. 특히, Ag 박막 표면의 일함수 변화를 측정하기 위하여 SPM (Scanning Probe Microscopy)의 KPFM (Kelvin Probe Force Microscopy) mode를 적용하여 nano 영역에서의 일함수 변화를 surface potential로 측정하여 UV 표면 산화에 의한 표면 일함수 형상을 확인하였다. Ag 박막은 rf magnetron sputter를 사용하여, Si 기판위에 300nm 두께로 증착시켰다. 이후 $O_3$ 발생되는 UV 램프로 Ag 박막 표면 30초 간격으로 최대 5분간 산화시켰으며, 이후 KPFM mode를 사용하여 산화 시간에 따른 Ag 박막 표면의 potential 변화를 측정하였다. 0~3분간 산화된 Ag 박막 표면의 potential은 약 6 mV로 일정하였으나 3분 이후 최대 110 mV까지 급격하게 변화하는 것을 확인할 수 있었다. Ag 박막 표면의 RMS roughness는 UV 산화처리 전0.7 nm였으나, potential이 급격하게 증가하는 시점인 3분 이후 2.83 nm로 약 400% 이상 증가하였다. 이를 통해 $O_3$ 발생 UV 램프로 산화된 Ag 박막의 표면 물성은 처리 시간에 따라 급격히 변하는 것을 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.37-41
• /
• 2019

Sheet resistance reduction in the Ag nanowire (NW) coated films is accomplished with slight improvement of optical properties for the application of transparent conducting electrodes by using $O_2$ plasma treatment. The sheet resistance was optimized after 30 seconds $O_2$ plasma treatment, showing the 27 % of maximum decrease of sheet resistance. It is found that the $O_2$ plasma treatment get rid of the residual organic materials at the junction of Ag NWs. However, the Ag NWs may be also snapped by the excessive $O_2$ plasma treatment can showing the collapses of Ag NWs networks. Furthermore, the optical properties such as optical transmittance and haze were monotonically improved with the $O_2$ plasma treatment time until 90 seconds.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.114-119
• /
• 2016

In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.71-78
• /
• 2014

Gamma irradiation and its convergence with nano-silver particles and sodium dichloroisocyanurate (NaDCC) were investigated to inhibit germination and mycelial growth of Botrytis elliptica, the pathogen of lily leaf blight. In addition, the same treatments were studied on the process of disease development with detached leaf of lily cv. Siberia. Spray inoculation, which is closer to natural infection than wound inoculation, can be a way to investigate infection ability of the treated pathogen. The irradiating dose required to reduce the population by 90%, $D_{10}$, was 526 Gy irradiating with 0-2000 Gy gamma ray on the conidial suspension as well as the growing mycelia. Even at 2000 Gy, the mycelium was not killed but just delayed its growth at 1-2 days behind. Convergent treatment with 40 mg/l of NaDCC just before 200 Gy gamma irradiation was the best way to decrease the conidial germination about 1/1000 times. The control values of gamma irradiation were 23% and 19.5% at wound inoculation and spray inoculation, respectively. On wound-inoculation, the control value of NaDCC only was 89%, and that of NaDCC convergent with 200 Gy gamma irradiation was 32%. On sprayinoculation, the highest control value was NaDCC at 50%, and that of NaDCC convergent with gamma irradiation was 24%.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.37-41
• /
• 2012

The Ag nanoparticles attached $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ (LSCF) perovskites were prepared by plasma method. The Ag nanoparticles with size of several nanometers deposited from the Ag target were coated on the surface of LSCF powders with size range from 0.2 to 3 ${\mu}m$. The agglomeration of Ag particles annealed at $800^{\circ}C$ under inert gas of Ar were rarely observed. The inter-diffusion between surface Ag and core LSCF is effectively strong to prevent aggregation of Ag nanoparticles. The wave number of FT-IR spectra for LSCF were largely shifted as the concentration of Ag on LSCF up to 2.11 wt.%. The ionic states of irons in LSCF were measured by M$\ddot{o}$ssbauer spectroscopy. The small amount of $Fe^{4+}$ ions are converted to $Fe^{3+}$ ions after Ag nanopartcles were coated on LSCF.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.205-211
• /
• 2012

We investigated the optical and hydrophobic properties of the deposited silver (Ag) zinc oxide (ZnO) nanorods (NRs) on flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates (i.e., ITO/PET). The ZnO NRs were grown by an electrochemical deposition using a sputtered ZnO seed layer and the Ag was deposited by using a thermal evaporator. For comparison, the same fabrication process was carried out on the bare ITO/PET without ZnO NRAs. Due to the discrete surface of ZnO NRs, the deposited Ag was formed as nano-scale particles, while the Ag became film-like for bare ITO/PET. In order to control the size and amount of Ag particles, the Ag deposition time was changed from 100 to 600 s. When the deposition time was increased, the Ag particles became larger and denser, and the absorptance was increased. This enhanced absorptance may be due to the localized surface plasmon resonance of Ag particles. Furthermore, the relatively high hydrophobicity was observed for the deposited Ag on the ZnO NRs/ITO/PET. These improved optical and surface properties are expected to be useful for flexible photovoltaic and optoelectronic devices.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.414-420
• /
• 2007

Nanomaterials have been applied to various fields due to their advantageous characteristics such as high surface area, rapid diffusion, high specific surface areas, reactivity in liquid or gas phase, and a size close to biomacromolecules. Up to date, increased manufacturing and frequently use of the materials, however, revoke people's concerns on their hazard impact including toxicity the materials. Many research groups have carried out different protocols to evaluate toxic effects of nanomaterilas on different organisms, and consequently, nanomaterials are known to cytotoxicity. In this paper, we reviewed some of the most reports on toxic effects of several nanoparticles specifically on bacteria. There are numbers of reports focused on antibacterial effect of nanoparticles based on bacterial cell viability. Therefore, the application of each nanomaterial should be concerned with its toxicity and its toxic effect should be evaluated in terms of concentrations and sizes of the nanomaterials used, prior to use of a nanomaterial.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.454-462
• /
• 2023

Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate high-performance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.33-39
• /
• 2023

Nano-sized materials can be coated on various substrates, and since this material is transparent and conductive, it can be used as a transparent electrode for electronic devices or an electrode for power supply. In this study, CNT and Ag nanowires were repeatedly coated using the silk screen technique, and samples formed up to 5 times were fabricated, and their optical and electrical properties were measured and analyzed. It was confirmed that marks were formed on the surface of the silkscreen-coated sample according to the coating direction, and the trend of transmittance and surface resistance according to the number of times of coating was investigated. As the number of coatings increased, transmittance and surface resistance tended to decrease. In particular, in the case of transmittance, the range of change was large in the samples coated 2 and 5 times. These changes were confirmed by the Ag nanowire coating. In addition, starting from 700 nm, the previous wavelength region increased according to the wavelength, while the above showed a tendency to decrease. The surface resistance was lowered from 9Ω/cm² when coating once to 0.856Ω/cm² when coating five times. It was found that the resistance value was affected by Ag similarly to the permeability. In the future, it is necessary to realize a desired transparent electrode through Ag concentration and coating of Ag nanowires with other methods and fusion with highly transparent CNT to apply to electronic devices.