Abstract
In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.
본 연구에서는 박테리아 셀룰로오스(BC)와 같은 천연고분자에 전도성 고분자 PEDOT:PEG와 graphene, 은나노와이어(AgNW)를 코팅하여 전도성을 부여하고자 하였다. 미리 PEDOT:PEG와 황산을 10~20%를 혼합하여 그 용액을 전자 스핀 코팅으로 BC 기판에 코팅하였다. 그 후, 전도성을 향상시키고자 graphene과 AgNW로 코팅하여 hall effect로 측정하였다. 그 결과, 대조군 PEDOT:PEG로 코팅한 BC 막의 전자농도($2.487{\times}10^{10}/cm^3$)에 비해 PEDOT:PEG에 황산을 10%로 혼합하여 코팅시킨 BC막($8.093{\times}10^{15}/cm^3$) 쪽이 $3.25{\times}10^5$배 높은 값을 나타내는 것으로 전도도가 대폭 향상되었음을 알 수 있었다. 또한, SEM분석으로 PEDOT:PEG가 황산처리에 의해 폴리머 형상으로 변화된 것을 확인 할 수 있었다. 분자구조의 변화를 FTIR분석결과 $1200cm^{-1}$ 파장의 S-O그룹이 황산처리 전에 비해 황산 혼합한 쪽에서 크게 상승된 것이 확인되었다. 이 방법을 이용하여 소량의 PEDOT:PEG사용으로 투명성을 확보할 수 있으며 미리 황산을 처리하는 것으로 제조공정을 단순하게 할 것으로 사료된다.