• Composites Research
• /
• 제26권6호
• /
• pp.337-342
• /
• 2013

나노입자를 이용하여 강화 효과를 높이기 위해서는 고분자 기지 내부의 균일한 분산 상태를 확보하여야 한다. 또한 균일분산 조건 확보 후 균일 분산상태를 증명할 평가자료가 필요하다. 본 연구는 에폭시 수지와 SiC 나노입자를 혼합한 SiC/에폭시 복합 수지를 제조할 경우 커패시턴스 측정법을 이용한 강화재 분산도 예측 연구를 진행하였다. 커패시턴스는 전기용량을 의미하며 측정 재료의 내부 전하량과 비례한다. 기존 에폭시 수지에 비해 나노 SiC 입자를 함유할 경우 전하량이 증가되는 이론을 바탕으로 구간별 커패시턴스 측정에 따른 분산도 평가를 진행하고, 커패시턴스 분산도 예측방법에 대한 타당성을 FE-SEM과 물리적 강도 증가 방법으로 평가하였다. 소니케이션 분산 방법과 교반기 분산 방법을 이용하여 분산 방법에 따른 SiC 나노입자 분산도 상태를 비교하였다. 인장강도와 커패시턴스 간의 상관관계가 있었으며, 파단면에 대한 비교를 할 때 분산성 향상에 대한 차이를 확인할 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• 대한화학회지
• /
• 제47권6호
• /
• pp.619-624
• /
• 2003

졸겔법을 사용하여 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$(x=0.02, 0.05, 0.08, 0.12) 형광체 분말을 합성하였다. 형광체 입자의 표면을 나노 크기의 $SiO_2$(입자크기${\thickapprox}30 nm$)로 코팅한 후 스핀-코팅법으로 유리 기판에 형광체 막을 제작하였다. 유리의 연화온도인 $700^{\circ}C$ 부근에서 융착 되는 $SiO_2$ 나노 입자들에 의해 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$ 입자들은 유리 기판 표면 위에 강하게 융착 되었다(>9H, 연필 경도계). 본 연구에서 채택한, 형광체 막을 제조하는 간단하고 비용이 저렴한 이 방법은 디스플레이장치의 응용 분야에 적용될 수 있을 것으로 생각한다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The most common technique to fabricate $MgB_2$ superconducting wire is by powder-in-tube (PIT) technique. Therefore, the starting powder for the processing of $MgB_2$ superconductors is an important factor influencing the superconducting properties and performance of the conductors. In this study, the influence of magnesium precursor powders and annealing temperatures on the transition temperatures ($T_c$) and critical current densities ($J_c$) of $MgB_2/Fe$ wires was investigated. All the $MgB_2/Fe$ wires were fabricated by in situ PIT process. It was found that higher $J_c$ was obtained for $MgB_2$ wires with smaller particle size of magnesium precursor powders. The $J_c$ also increases with decreasing annealing temperatures.

• 한국분말재료학회지
• /
• 제13권6호
• /
• pp.415-420
• /
• 2006

Nanostructured metallic materials are synthesized by bottom-up processing which starts with powders for assembling bulk materials or top-down processing starting with a bulk solid. A representative bottom-up and top-down paths for bulk nanostructured/ultrafine grained metallic materials are powder consolidation and severe plastic deformation (SPD) methods, respectively. In this study, the bottom-up powder and top-down SPD approaches were combined in order to achieve both full density and grain refinement without grain growth, which were considered as a bottle neck of the bottom-up method using conventional powder metallurgy of compaction and sintering. For the powder consolidation, equal channel angular pressing (ECAP), one of the most promising method in SPD, was used. The ECAP processing associated with stress developments was investigated. ECAP for powder consolidation were numerically analyzed using the finite element method (FEM) in conjunction with pressure and shear stress.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.362-366
• /
• 2007

Magnesium and magnesium alloys are promising materials for light weight and high strength applications. In order to obtain homogeneous and high quality products in powder compaction and powder forging processes, it is very important to control density and density distributions in powder compacts. In this study, a model for densification of metallic powder is proposed for pure magnesium. The mode] considers the effect of powder characteristics using a pressure-dependent critical density yield criterion. Also with the new model, it was possible to obtain reasonable physical properties of pure magnesium powder using cold iso-state pressing. The proposed densification model was implemented into the finite element method code. The finite element analysis was applied to simulating die compaction of pure magnesium powders in order to investigate the density and effective strain distributions at room temperature.

• 한국표면공학회지
• /
• 제39권6호
• /
• pp.295-301
• /
• 2006

Hard chrome plating has been used in surface hard coating over 50 years both for applying hard coating and re-building of worn components. Hard chrome plating solution and mist pollute environment with very toxic $Cr^{6+}$(hex-Cr) known as carcinogen which causes lung cancer, High velocity oxy-fuel (HVOF) thermal spray coatings of WC base cermet and Co-alloy powders are the most promising candidates for the replacement of the traditional hard chrome plating. Surface properties, wear, and friction behaviors of micron size Co-alloy (T800) and micron size WC-l2Co (WC-Co) have been studied for the application as hard coatings. The temperature dependence of wear and friction behaviors of T800 and WC-Co have been investigated at the temperature of $25^{\circ}C$ and $538^{\circ}C$ for the application to high speed spindle.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.192-196
• /
• 2016

The Fe-Si-B-Nb-Cu alloys containing Ca and Al were rapidly solidified to thin ribbons by melt-spinning. The ribbons were ball-milled to make powders, and then mixed with 1 wt.% water glass and 1.5 wt.% lubricant. The mixed powders were burn-off, and then compacted to form toroidal-shaped cores, which were heat treated to crystallize the nano-grain structure and to remove residual stress of material. The characteristics of the powder cores were analyzed using a differential scanning calorimetry (DSC) and a B-H meter. The microstructures were observed using transmission electron microscope (TEM). The optimized soft magnetic properties (${\mu}_i$ and $P_{cv}$) of the powder cores were obtained from the Ca and Al containing alloys after annealing at $530^{\circ}C$ for 1 h. The core loss of Fe-Si-B-Nb-Cu-based powder cores was reduced by the addition of Ca element, and the initial permeability increased due to the addition of Al element.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권5호통권57호
• /
• pp.93-100
• /
• 2009

이 논문은 나노물질이 결합된 시간반사영역기(TDR)의 보의 변형에 관한 실험자료와 기존 구조 해석기법에 따른 변형간의 상관관계를 평가하기 위한 것이다. TDR의 동축케이블에 일정한 간격마다 나노물질 ($BaTiO_3$ powders and silver mixture)을 결합하여 토목구조물에 설치할 수 있도록 하였다. 실험결과,나노물질은 보에 설치된 동축케이블의 정확한 위치정보를 알려주었으며, TDR센서시스템과 Fourier series 를 활용하여 필터링 된 실험 자료는 보의 변형을 정확하게 알려주었다. 그러므로, 나노-TDR시스템과 Fourier filter를 활용하여 보의 변형에 관한 정확한 모니터링이 가능하였으며, 변형에 관한 보다 나은 해석이 가능하다는 점에서 기존의 TDR센서 혹은 광섬유 센서보다 진보한 시스템이라 할 수 있다.

• Composites Research
• /
• 제32권3호
• /
• pp.141-147
• /
• 2019

In this study, micro-sized and nano-sized pure aluminum (Al) powders were compressed by unidirectional pressure at room temperature. Although neither type of Al bulk was heated, they had a high relative density and improved mechanical properties. The microstructural analysis showed a difference in the process of densification according to particle size, and the mechanical properties were measured by the Vickers hardness test and the nano indentation test. The Vickers hardness of micro Al and nano Al fabricated in this study was five to eight times that of ordinary Al. The grain refinement effect was considered to be one of the strengthening factors, and the Hall-Petch equation was introduced to analyze the improved hardness caused by grain size reduction. In addition, the effect of particle size and dispersion of aluminum oxide in the bulk were additionally considered. Based on these results, the present study facilitates the examination of the effect of particle size on the mechanical properties of compacted bulk fabricated by the powder metallurgy method and suggests the possible way to improve the mechanical properties of nano-crystalline powders.