• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.37-41
• /
• 2004

In this paper, a reflector type frequency doubler for local oscillator at 24GHz is designed and fabricated with ne71300-N MESFET. Optimum source and load impedances are decided through a multiharmonic load pull simulation technique. A conversion gain can be improved using the reflector and fundamental and third harmonics are well suppressed with open stub of $\lambda$/4 length Measured results show output power at 0dBm of input power is -3.776dBm, conversion gain 0.736dB, harmonic suppression 41.064dBc, respectively.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.3
• /
• pp.139-170
• /
• 2013

We extend a p-hierarchical decomposition of the second degree finite element space of N$\acute{e}$d$\acute{e}$lec for tetrahedral meshes in three dimensions given in [1] to meshes with hexahedral elements, and derive p-hierarchical decompositions of the second degree finite element space of Raviart-Thomas in two dimensions for triangular and quadrilateral meshes. After having proved stability of these subspace decompositions and requiring certain saturation assumptions to hold, we construct a local a posteriori error estimator for fem and bem coupling of a time-harmonic electromagnetic eddy current problem in $\mathbb{R}^3$. We perform some numerical tests to underline reliability and efficiency of the estimator and test its usefulness in an adaptive refinement scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.4
• /
• pp.372-372
• /
• 1996

The torsional vibration of the propulsion shafting system equipped with viscous damper is investigated. The equivalent system is modeled by a two mass softening system with Duffing's oscillator and the vibratory motion is described by non-linear differential equations of second order. The damper casing is fixed at the front-end of crankshaft and the damper's inertia ring floats in viscous silicon fluid inside of the camper casing. The excitation frenquency is proportional to the rotational speed of engine. The steady state response of the equivalent system is analyzed by the computer and for this analyzing, the harmonic balance method is adopted as a non-linear vibration analysis technique. Frequency response curves are obtained for 1st order resonance only. Jump phenomena are explained. The discriminant for the solutions of the steady state response is derived. Both theoretical and measured results of the propulsion shafting system are compared with and evaluated. As a result of comparisions with both data, it was confirmed that Duffing's oscillator can be used in the modeling of the propulsion shafting system attached with viscous damper with non-linear stiffness.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.347-353
• /
• 2002

This paper presents an accurate method for measuring the ground resistance in powered grounding system. Most of substations and electric power equipments are interconnected to an extensive grounding network of overhead ground wires, neutral conductors of transmission lines, cable shields, and etc. The parasitic effects due to circulating ground currents and ground potential rise make a significant error in measuring the ground resistance. The test current transition method was proposed to reduce the effects of stray ground currents, ground potential rise and harmonic components in measurements of the ground resistance for powered grounding systems. The instrumental error of the test current transition method is decreased as the ratio of the test current signal to noise(S/N) increases. It was found from the test results that the proposed measuring method of the ground resistance is more accurate than the conventional fall-of-potential method or low-pass filter method, and the measuring error was less than 3[%]when S/N is 10.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1995

Large size potassium lithium niobate (KLN) crystals with dimensions of $8{\times}6{\times}2 mm^3$ were grown by the top - seeded solution growth (TSSG) method. The extraordinary refractive index $n_e$at the second harmonic frequency for KLN crystal depends on the composition and decreases in this crystal due to the large Li content. KLN crystal was characterized by observation in UV - VIS spectrometry. It is transparent from the ultraviolet to infrared spectral regions that the transmission limit and cut- off wavelength are about 350 and 380 nm.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.50-54
• /
• 1992

Maskless depositon of copper onto n-doped and p-doped Si in an aqueous copper sulfate solution is investigated. On p-doped Si substrates, microscopic $(~10\mu\textrm{m}$) copper spots are deposited by illuminating continuous wave $Ar^+$ laser beam of wavelength 514.5 nm. Copper deposition on n-doped Si substrates is also achieved by shinning second harmonic pulses $(pulse width~25 nsec, \lambda=530 nm)$ of a passively Q-switched Nd:YAG laser. The observed deposition is attributed to the electric field resulting from the Galvanic potential of a semiconductor-electrolyte junction.

• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.181-188
• /
• 2006

The data, methodology, and the resulting accurate gravimetric geoid model for the Korean Peninsula (latitude from 32˚ N to 40˚ N and longitude from 124˚ E to 131˚ E) are presented in this study. The types of used data were a high degree geopotential model (the EGM96 spherical harmonic coefficient set), a set of 12,615 land gravity observations, 1,056,075 shipborne gravity observations, and KMS2002 gravity anomalies from satellite altimetry. The remove-restore technique was successfully applied to combining the above mentioned data sets using up to degree and order 112 of the EGM96 coefficient. The residual geoid was calculated with residual Free-Air anomaly values using the spherical Stokes' formula with a 37-km integration cap radius. The geoid model was referred to WGS84 geodetic system and was tested using a set of GPS/levelling geoid undulations. The absolute accuracy is 0.132 m and some improvement compared to the PNU95 geoid model was found.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.5
• /
• pp.223-227
• /
• 1983

A molecular dynamic computer experiment was performed on a system of 108 particles composed of a single polymer chain and solvent molecules. The state considered was in the immediate neighborhood of the triple point of the system. The polymer itself is an analog of a freely jointed chain. The Lennard-Jones potential was used to represent the interactions between all particles except for that between the chain elements forming a bond in the polymer chain, for which the interaction was expressed by a harmonic potential. The self-diffusion coefficient and velocity autocorrelation function (VACF) of a polymer were calculated at various chain lengths $N_p$, and various interaction strengths between solvent molecules and a polymer chain element. For self-diffusion coefficients D, the Einstein relation holds good; as chain length $N_p$ increases the D value decreases, and D also decreases as ${\varepsilon}_{cs}$ (the interaction parameter between the chain element and solvent molecules) increases. The relaxation time of velocity autocorrelation decreases as ${\varepsilon}_{cs}$ increases, and it is constant for various chain lengths. The diffusion coefficients in various conditions reveal that our systems are in a free draining limit as is well known from the behavior of low molecular weight polymers, this also agrees with the Kirkwood-Riesman theory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.60-68
• /
• 2007

A technique is presented to extract differential second harmonic output from common source nodes of a cross-coupled P-& N-FET oscillator. Provided the impedances at the common source nodes are optimized and the fundamental swing at the VCO core stays in a proper mode, it is found that the amplitude and phase errors can be kept within $0{\sim}1.6dB$ and $+2.2^{\circ}{\sim}-5.6^{\circ}$, respectively, over all process/temperature/voltage corners. Moreover, an impedance-tuning circuit is proposed to compensate any unexpectedly high errors on the differential signal output. A Prototype 5-GHz VCO with a 2.5-Hz LC resonator is implemented in $0.18-{\mu}m$ CMOS. The error signal between the differential outputs has been measured to be as low as -70 dBm with the aid of the tuning circuit. It implies the push-push outputs are satisfactorily differential with the amplitude and phase errors well less than 0.34 dB and $1^{\circ}$, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.78-90
• /
• 2017

This paper presents the design of closed loop controllers operating a single-phase AC-DC three-level converter for improving power quality at AC mains. Closed loop inhibits outer voltage controller and inner current controller. Simulations of three level converter with three different voltage and current controller combinations such as PI-Hysteresis, Fuzzy-Hysteresis and Fuzzy tuned PI-Hysteresis are carried out in MATLAB/Simulink. Performance parameters such as input power factor and source current total harmonic distortion (THD) are considered for comparison of the three controller combinations. The fuzzy-tuned PI voltage controller with hysteresis current controller combination provides a better result, with a source-current THD of 0.93% and unity power factor without any source side filter for the three level converter. For load variations of 25% to 100%, a THD of less than 5% is obtained with a maximum value of only 1.67%. Finally, the fuzzy-tuned PI voltage with hysteresis controller combination is implemented in a Xilinx Spartan-6 XC6SLX25 FPGA board for experimental validation of power quality enhancement. A prototype 100 W, 0-24-48 V as output converter is considered for the testing of controller performance. A source-current THD of 1.351% is obtained in the experimental study with a power factor near unity. For load variations of 25% to 100%, the THD is found to be less than 5%, with a maximum value of only 2.698% in the experimental setup which matches with the simulation results.