• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.110-111
• /
• 2007

In order to form a p-type ZnO thin film, ZnO thin film is deposited by pulsed laser deposition(PLD) on GaAs substrate followed by nermal treatment that ensures the diffusion of As atoms from the GaAs substrate to the ZnO thin films. Photoluminescence (PL) measurement reveals that the improved qualify of ZnO thin films is acquired at the growth temperature of $400^{\circ}C$. It is ZnO film grown at $100^{\circ}C$ that shows the change from n-type to p-type by the thermal treatment. Measured carrier concentration in the film is changed from $-5.70{\times}10^{13}\;to\;9.09{\times}10^{18}$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2929-2934
• /
• 2014

The reaction between $[CdBr_2{\cdot}4H_2O]$ and anhydrous $[ZnCl_2]$ with N,N'-bidentate N-(pyridin-2-ylmethylene)-cyclopentanamine (impy) in ethanol yields dimeric $[(impy)Cd({\mu}-Br)Br]_2$ and monomeric $[(impy)ZnCl_2]$ complexes, respectively. The X-ray crystal structure of Cd(II) and Zn(II) complexes revealed that the cadmium atom in $[(impy)Cd({\mu}-Br)Br]_2$ and zinc in $[(impy)ZnCl_2]$ formed a distorted trigonal-bipyramidal and tetrahedral geometry, respectively. Both complexes showed moderate catalytic activity for the polymerisation of methyl methacrylate (MMA) in the presence of modified methylaluminoxane (MMAO), with polymethylmethacrylate (PMMA) syndiotacticity of about 0.70.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2176-2182
• /
• 2013

A novel sol-gel method was implied to prepare CuO-doped ZnO nanoparticles. XRD and SEM techniques were used to characterize the CuO-doped ZnO sample. The photocatalytic degradation of Lidocaine HCl was investigated by two methods. The degradation was studied under different conditions such as the amount of photocatalyst, pH of the system, initial concentration, presence of electron acceptor, and presence of anions. The results showed that they strongly affected the photocatalytic degradation of Lidocaine HCl. The photodegradation efficiency of drug increased with the increase of the irradiation time. After 6 h irradiation with 400-W mercury lamp, about 93% removal of Lidocaine HCl was achieved. The degree of photodegradation obtained by Taguchi method compatible with the trial-and-error method showed reliable results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.25.2-25.2
• /
• 2009

Vertically aligned zinc oxide(ZnO) nanorods (NRs) with different surface morphology were grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrate with different deposition condition. Based on the surface morphology, ZnO nanostructures are divided into three types: nanoneedles, nanonails and nanorods with rounded tip. Variable temperature photoluminescence (PL) have employed to probe the exciton recombination in high density and vertically aligned ZnO Nanorod arrays. Low temperature photoluminescence measurements do not show any significant yellow emission, but the near band edge excitonic emission shows very strong dependence with the surface morphology. The recombination properties are expected to be different due to different surface-to-volume ratio and distribution of potential fluctuations of intrinsic defects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.241-246
• /
• 2016

ZnO thin films have wide application areas due to its versatile properties as transparent conductors, wide-bandgap n-type semiconductors, gas sensor materials, and etc. We have performed a systematic investigation on ultraviolet-assisted CVD (chemical vapor deposition) method. Ultraviolet irradiation during the deposition of ZnO causes chemical reduction on the growing surface; which results in the reduction of the deposition rate, increase in the surface roughness, and decrease of the electrical resistivity. These effects produce larger characteristic variation with various deposition conditions in terms of surface morphology and optical/electrical properties compared to normal CVD deposited ZnO thin films. This versatile controllability of ultraviolet-assisted CVD can provide a larger processing options in the fabrication of nano-structured materials and flexible device applications.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.208-211
• /
• 2016

In this study, thermal-treatment-derived variations of the thermoelectric characteristics of ZnO nanofibers (NFs) are examined. NFs that were prepared by electrospinning were transformed into n-type ZnO NFs after they were exposed to thermal heating for 30 min at 550℃. For the ZnO NFs, the Seebeck coefficient decreased from - 132.1 μV/K to - 44.6 μV/K over the heating-time range of 30 min to 120 min, while the electrical conductivity increased from 2.07 × 10^-3 S/m to 0.18 S/m.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.790-793
• /
• 1996

The azacrown compound, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N"-tri(methyl-acetic acid)(N3O2-tri(methylacetic acid)) was synthesized by modified procedure of Krespan. Potentiometric method has been used to determine the protonation constants of N3O2-tri(methylacetic acid) and stability constants of complexes on the divalent transition metal ions (Co2+, Ni2+, Cu2+, and Zn2+) and trivalent metal ions (Ce3+, Eu3+, Gd3+, and Yb3+) with N3O2-tri(methylacetic acid). The stability constants for the complexes of the divalent transition metal ions studied in the present work with N3O2-tri(methylacetic acid) were 11.4 for Co2+, 11.63 for Ni2+, 13.51 for Cu2+, and 11.65 for Zn2+, respectively. Thus, the order of the stability constants for complexes on the transition metal ions with N3O2-tri(methylacetic acid) was shown Co2+ < Ni2+ < Cu2+ > Zn2+ as same as the order of Irving-Williams series. The stability constants of Ce3+, Eu3+, Gd3+, and Yb3+ trivalent lanthanide metal ion complexes of N3O2-tri(methylacetic acid) were, respectively, 11.26 for Ce3+, 11.56 for Eu3+, 11.49 for Gd3+, and 11.80 for Yb3+. The values of the stability constants on trivalent metal ions with the ligand are increasing according to increase atomic number, due to increase acidity. But the value of stability constant of Gd3+ ion is less than the value of Eu3+ ion. This disordered behavior is also reported by Moeller.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.333-339
• /
• 2003

A new mineral, Zn analogue of rancieite (Chimooite), has been discovered at the Dongnam mine, Korea. It occurs as compact subparallel fine­grained flaky or acicular aggregates in the massive manganese oxide ores which were formed by supergene oxidation of rhodochrosite­sulfide ores in the hydrothermal veins trending NS­N25E and cutting the Pungchon limestone of the Cambrian age. The flakes of chimooite are 0.2 mm for the largest one, but usually less than 0.05 mm. The acicular crystals are elongated parallel to and flattened on (001). This mineral shows gradation to rancieite constituting its marginal part, thus both minerals are found in one and the same flake. Color is bluish black, with dull luster and brown streak in globular or massive aggregates. Cleavage is perfect in one direction. The hardness ranges from 2.5 to 4. Under reflected light it is anisotropic and bireflectant. It shows reddish brown internal reflection. Chemical analyses of different parts of both minerals suggest that rancieite and chimooite constitute a continuous solid solution series by cationic substitution. The empirical chemical formula for chimooite has been calculated following the general formula, $R_2_{x}$ M $n^{4+}$$_{9­x}$ $O_{18}$ $.$n$H_2O$ for the 7 $\AA$ phyllomanganate minerals, where x varies from 0.81 to 1.28 in so far studied samples, thus averaging to 1.0. Therefore, the formula of Zn­rancieite is close to the well­known strochiometric formula $_Mn_4^{4+}$ $O_{9}$ $.$4$H_2O$. The mineral has the formula (Z $n_{0.78}$N $a_{0.15}$C $a_{0.08}$M $g_{0.01}$ $K_{0.01}$)(M $n^{4+}$$_{3.98}$F $e^{3+}$$_{0.02}$)$_{4.00}$ $O_{9}$ $.$3.85$H_2O$, thus the ideal formula is (Zn,Ca)M $n^{4+}$$_4$ $O_{9}$ $.$3.85$H_2O$. The mineral has a hexagonal unit ceil with a=2.840 $\AA$ c=7.486 $\AA$ and a : c = 1 : 2.636. The DTA curve shows endothermic peaks at 65, 180, 690 and 102$0^{\circ}C$. The IR absorption spectrum shows absorption bands at 445, 500, 1630 and 3400 c $m^{1}$. The mineral name Chimooite has been named in honour of late Prof, Chi Moo Son of Seoul National University.ity.versity.ity.y.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.