• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.283-287
• /
• 2002

We have studied Zr(Si)N film as a diffusion barrier between Cu metal and Si substrate for application of interconnection metal in ULSI circuits. Zr(Si)N film was deposited with reactive DC magnetron sputtering system using $Ar/N_2$mixed gas. The value of the resistivity was the lowest for the ZrN film using 29 : 1 of Ar : $N_2$reactant gas ratio at room temperature and decreased with increasing of Si substrate temperature. As the value of ZrN film resistivity was decreased, the direction of crystal growth was toward to (002) plane. The barrier property of ZrN film added with Si was improved. But Si was added too much in ZrN film, the barrier property was degraded. The adhesive property was improved with increasing of Si in ZrN. For the analysis of the film, XRD, Optical microscopy, Scretch tester, so on were used.

• Korean Journal of Mathematics
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2004

In this paper we establish some recurrence relations satisfied by quotient moments of upper record values from the power distribution. Let {$X_n$, $n{\geq}1$} be a sequence of independent an identically distributed random variables with a common continuous distribution function(cdf) $F(x)$ and probability density function(pdf) $f(x)$. Let $Y_n=max\{X_1,X_2,{\cdots},X_n\}$ for $n{\geq}1$. We say $X_j$ is an upper record value of {$X_n$, $n{\geq}1$}, if $Y_j$ > $Y_{j-1}$, $j$ > 1. The indices at which the upper record values occur are given by the record times {$u(n)$}, $n{\geq}1$, where $u(n)=min\{j{\mid}j>u(n-1),X_j>X_{u(n-1)},n{\geq}2\}$ and $u(1)=1$. Suppose $X{\in}POW(0,1,{\theta})$ then $$E\left(\frac{X^r_{u(m)}}{X^{s+1}_{u(n)}}\right)=\frac{\theta}{s}E\left(\frac{X^r_{u(m)}}{X^s_{u(n-1)}}\right)+\frac{(s-\theta)}{s}E\left(\frac{X^r_{u(m)}}{X^s_{u(n)}\right)\;and\;E\left(\frac{X^{r+1}_{u(m)}}{X^s_{u(n)}}\right)=\frac{\theta}{n+1}\left[E\left(\frac{X^{r+1}_{u(m-1)}}{X^s_{u(n+1)}}\right)-E\left(\frac{X^{r+1}_{u(m)}}{X^s_{u(n-1)}}\right)+\frac{r+1}{\theta}E\left(\frac{X^r_{u(m)}}{X^s_{u(n)}}\right)\right]$$.

• ETRI Journal
• /
• v.10 no.4
• /
• pp.89-98
• /
• 1988

We consider an N duplicate-server system, where each server consists of two reconfigurable duplicated units which are subject to breakdowns. This system is studied analytically using generating functions, and also numerically using the matrix-geometric procedure. Using the generating function approach we obtain a recursive expression of the queuelength distribution for N=1. This expression in difficult to generalize to N>1. The numerical method is applicable for any value of N. For any N, we also obtain the condition for stability and the availability of the system.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.2
• /
• pp.365-371
• /
• 2016

Let f be a transcendental meromorphic function in the complex plane $\mathbb{C}$, and a be a nonzero constant. We give a quantitative estimate of the characteristic function T(r, f) in terms of $N(r,1/(f^2(f^{\prime})^n-a))$, which states as following inequality, for positive integers $n{\geq}2$, $$T(r,f){\leq}\(3+{\frac{6}{n-1}}\)N\(r,{\frac{1}{af^2(f^{\prime})^n-1}}\)+S(r,f)$$.

• Journal of Chest Surgery
• /
• v.27 no.7
• /
• pp.576-580
• /
• 1994

For 26 months since August 1991, 10 consecutive patients with congenital left ventricular outflow tract obstruction underwent corrective surgery in Pusan Paik Hospital. Their ages ranged from 2 to 18 years. There were 6 male and 4 female patients. According to stenotic site, obstruction were classified into supravalvular [n = 5], subvalvular [n = 4], valvular stenosis [n = 1]. We have performed patch enlargement of ascending aorta [n = 2], supravalvular membrane resection and patch enlargement of ascending aorta [n = 3], subvalvular membrane resection [n = 2], subvalvular membrane resection and left ventricular myectomy [n = 2] and aortic annuloplasty with Dacron patch and aortic valve replacement [n = 1]. Preoperative mean value of systolic pressure gradient were 85.0 $\pm$29.2mmHg[supravalvular], 70.0mmHg[valvular], 72.5 $\pm$ 22.5mmHg[subvalvular], and 78.5 $\pm$ 24.3mmHg[total]. Postoperative mean value of systolic pressure gradient were 31.0 $\pm$ 8.9mmHg[supravalvular], 0mmHg[valvular], 15.0 $\pm$ 10.8mmHg[subvalvular], and 21.5 $\pm$ 13.9mmHg[total]. Postoperative systolic pressure gradient was decreased significantly[p = 0.001]. Postoperative course and short-term follow up results were good except one case of transient heart failure.

• Journal of Surface Science and Engineering
• /
• v.47 no.4
• /
• pp.174-180
• /
• 2014

In this study, TiAlSiN coatings have been successfully synthesized on stainless steel and tungsten carbide substrate by a hybrid coating method employing a cathodic arc and a magnetron sputtering source. TiAl and Si target were vaporized with the cathodic arc source and the magnetron sputtering source, respectively. Process gas was the mixture of nitrogen and argon gas. With the increase of Si content, the crystallinity and the grain size of TiAlSiN film was decreased. At the Si content of more than 8 at.%, grain size of TiAlSiN was saturated at around 2 nm. The hardness value of the TiAlSiN film increased with incorporation of Si, and had the maximum value of ~ 3,233 Hv at the Si content of 9.2 at.%. The oxidation resistance of TiAlSiN film was enhanced with the increase of Si content.

• Journal of Powder Materials
• /
• v.3 no.1
• /
• pp.49-56
• /
• 1996

The effect of$H_{2}/N_{2}$gas sintering atmosphere on the carbon content and mechanical properties during the metal injection molding process of carbonyl iron-nickel powder was studied. The carbon content of the specimen after debinding in the pure$N_{2}$atmosphere appeared 0.78 wt%. After showing the maximum value of 1.48 wt.% in the debinding atmosphere of 10%$H_{2}/N_{2}$gas mixture, the carbon content of the debinded specimen decreased gradually with increasing the$H_2$content in the$H_{2}/N_{2}$gas mixture. The carbon contents of the sintered specimen were 0.46~0.63wt% in Na gas atmosphere, while they appeared extremely low above 40%$H_{2}/N_{2}$gas atmosphere. The relative sintered density increased abruptly from 88~90% to 93~96% with the addition of Ni, while the density nearly unchanged above 2% Ni addition. The sintered density increased with increasing the fraction of$H_{2} in H_{2}/N_{2}$gas mixture. Tensile strength and hardness increased, and elongation decreased with increasing carbon and Ni content. In spite of high carbon content of 0.63 wt%, the superior elongation value of 10% was shown.

• The Korean Journal of Ecology
• /
• v.12 no.4
• /
• pp.245-256
• /
• 1989

Nitrogen cycling was in vestigated in Piuns koraiensis plantations with different ages, 1, 2, 3, 6, 9 and 11 years, which were reforested after clear-cutting. Annual N input by bulk precipitation was 10kg., and output by runoff decreased as the plantation aged, especially in-N. The standing N content of the whole vegetation increased approximately 5 times through 11 years. Understory surpassed P. koraiensis plants in the distribution of standing N content for the initial 9 years, but reversed thereafter. Annual N uptake of P. koraiensis plants increased greatly through 11 years, but that of understory increased somewhat until 9 years and decreased thereafter. The maximum N uptake of the whole vegetation was made in the 9-yr-old plantation. In the 1-yr-old one, 59% of the maximum was already absorbed by understory which mainly consisted to herbs. The recycling coefficient, ratio of annual return to rptake, of the whole vegetation decreased as the plantation aged and the value of understory was greater than that of P koraiensis plants. On the contrary, the N use efficiency, ratio of the net primary production to N uptake, of the whole vegetation increased as the plantation aged and the value of understory was less than that of P. koraiensis plants. Consequently, it is emphasized that understory played an important role in such plantation reforesred after clear-cutting for the initial 9 years.

• Journal of Surface Science and Engineering
• /
• v.38 no.5
• /
• pp.202-206
• /
• 2005

Nitriding treatments were conducted on tool steel (SKD 61) at a temperature of $500^{\circ}C$ for 5 hr using high vacuum direct current (DC) plasma, with ammonia and argon as source gases. The structural and compositional changes produced in the nitrided layers by applying different ratios of Ar to $NH_{3}\;(n_{Ar}/n_{NH3}) were investigated using glancing x-ray diffraction (GXRD), optical microscopy, atomic force microscopy (AFM), micro-Vickers hardness testing, and pin-on-disc type tribometer. Nitriding case depths of around of $50{\mu}m$ were produced, varying slightly with different ratios of $n_{Ar}/n_{NH3}. It was found that the specimen surface hardness was 1150 Hv with $n_{Ar}/n_{NH3}=1, increasing to a maximum value of 1500 Hv with $n_{Ar}/n_{NH3}=5. With a further increase in ratio to $n_{Ar}/n_{NH3}=10, the surface hardness of the specimen reduced slightly to a value of 1370 Hv. These phenomena were caused by changes of the crystallographic structure of the nitride layers, i.e the $\gamma'-Fe_{4}N$ phase only was observed in the sample treated with $n_{Ar}/n_{NH3}$=1, and the intensity of the $\gamma'-Fe_{4}N$ phase were reduced but new phase of $\varepsilon'-Fe_{3}N$, which was known as a high hardness, with increasing $n_{Ar}/n_{NH3}. Also, the relative weight loss of counterface of the pin-on-disc with unnitrided steel was 0.2. And that of nitrided steel at a gas mixture ($n_{Ar}/n_{NH3}) of 1, 5, 7, and 10 was 0.4, 0.7, 0.6, and 0.5 mg, respectively. This means that the wear resistance of the nitrided samples could be increased by a factor of 2 at least than that of unnitrided steel.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.4
• /
• pp.514-522
• /
• 2017

Objective: The study aimed to assess the N use efficiency (NUE) of pig slurry (in comparison with chemical fertilizer) for each regrowth yield and annual herbage production and their nutritive value. Methods: Consecutive field experiments were separately performed using a single application with a full dose of N (200 kg N/ha) in 2014 and by four split applications in 2015 in different sites. The experiment consisted of three treatments: i) control plots that received no additional N, ii) chemical fertilizer-N as urea, and iii) pig-slurry-N with five replicates. Results: The effect of N fertilization on herbage yield, N recovery in herbage, residual inorganic N in soil, and crude protein were significantly positive. When comparing the NUE between the two N sources (urea and pig slurry), pig slurry was significantly less effective for the earlier two regrowth periods, as shown by lower regrowth dry matter (DM) yield, N amount recovered in herbage, and inorganic N availability in soil at the 1st and 2nd cut compared to those of urea-applied plots. However, the effect of split application of the two N sources was significantly positive at the last two regrowth periods (at the 3rd and 4th cut). The two N sources and/or split application had little or no influence on neutral detergent fiber (NDF) content, acid detergent fiber (ADF) content, and in vitro DM digestibility, whereas cutting date was a large source of variation for these variables, resulting in a significant increase in in vitro DM digestibility for the last two regrowth periods when an increase in NDF and ADF content occurred. Split application of N reduced the N loss via nitrate leaching by 36% on average for the two N sources compared to a single application. Conclusion: The pig slurry-N was utilized as efficiently as urea-N for annual herbage yield, with a significant increase in NUE especially for the latter regrowth periods.