• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.101-107
• /
• 2022

In this article, we propose a new protocol at fast scan mode for a sea-surface small target detection. The conventional fast scan mode is composed of coherent intrascan integration to suppress sea clutter and non-coherent interscan integration to exclude sea spikes. The proposed method realizes the coherent interscan integration by the new Fourier relationship between carrier-frequency and initial-radial-range, which can be analytically derived by using multiple carrier frequencies at fast scan mode, leading to improved detection performance, compared to the conventional non-coherent methods. In simulations, our proposed method is verified.

• 지구물리
• /
• 제9권3호
• /
• pp.231-240
• /
• 2006

The crustal structure of the Korean Peninsula was investigated by analyzing phase velocity dispersion data of Rayleigh waves. Earthquakes recorded by three component broad-band velocity seismographs during 1999-2004 in South Korea were used in this study. The fundamental mode Rayleigh waves were extracted from vertical components of seismograms by multiple filter technique and phase match filter method. Phase velocity dispersion curves of the fundamental mode signal pairs for 14 surface wave propagation paths on the great circle in the range 10 to 80 sec were computed by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocity data of Rayleigh wave were inverted. All the result models can be explained by a rather homogeneous crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to about 33 km depth without any distinctive crustal discontinuities and an uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec. Our results turn out to agree well with recent study of Cho et al. (2006 b) based on the analysis of seismic background noises to recover short-period (0.5-20 sec) Rayleigh- and Love-wave group velocity dispersion characteristics.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.35-36
• /
• 2007

We report a probe using a single double clad fiber (DCF) for fluorescence spectroscopy. Bidirectional separate transmission for excitation and fluorescence light in a single fiber was implemented. A DCF coupler made by side-polished method could extract none but the collected fluorescence signals propagating in inner cladding mode, thereby diminishing the interference of silica background generated by the excitation in core mode. The experimental results show that the fluorescence spectra of biological tissues obtained using the DCF probes have much less silica background than using a standard multiple-mode fiber.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.42.2-42
• /
• 2001

This paper deals with a fuzzy sliding mode observer for nonlinear systems. A nonlinear system is approximated by a multiple model Takagi Sugeno fuzzy system and then transformed into a canonical form for which a nonlinear observer is constructed. This study presents a type of fuzzy sliding mode observer that deals with matched and unmatched uncertainties in the plant dynamics very effectively. The proposed method was validated by the example of a inverted pendulum.

• 전자공학회논문지SC
• /
• 제39권3호
• /
• pp.191-200
• /
• 2002

본 논문에서는 다변수 다치 논리함수에 대하여 구간함수를 절단 차분 함수로 변환하는 방법을 제시하였고, 절단 차분 함수를 전류모드 CMOS에 의한 전류 미러 회로와 금지회로를 사용하여 일정한 패턴을 갖는 다치 논리회로로 구현하는 방법을 제시하였다. 또한 제시한 방법을 2변수 4치 MOD(4) 가산 진리표와 2변수 4치 유한체 GF(4)상의 승산 진리표를 실현하는 회로의 구현에 적용하였다. PSpice 시뮬레이션을 통하여 이 회로들에 대하여 동작특성을 보였다. 회로들의 시뮬레이션은 2㎛ CMOS 표준 기술을 이용하였고, 단위 전류를 15㎂로 하였으며, 전원전압은 3.3V를 사용하였다. 본 논문에서 제시한 전류모드 CMOS에 의해 구현된 회로들은 일정한 패턴, 상호연결의 규칙성을 가지며, 다치 논리함수의 변수의 확장성을 가지므로 VLSI 실현에 적합할 것으로 생각된다.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.875-882
• /
• 2014

In this paper, we propose a new parameter estimation method that can deal with the data of multiple time intervals simultaneously. If there are common modes in the multiple time intervals, it is possible to create a new polynomial by summing the coefficients of the prediction error polynomials of each time interval. By calculating the roots of the new polynomial, it is possible to estimate the common modes that exist in each time interval. The accuracy of the proposed parameter estimation method has been proven by using appropriate test signals.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.942-947
• /
• 2001

This paper provides a stability analysis of the transverse vibration of a spinning disk under the torque fluctuation from a permanent magnetic motor. An analytical model has been formulated for a flexible annular disk with its spinning velocity varying harmonically with the same frequency as the cogging torque. A perturbation method based on multiple time scales is applied to perform the stability analysis. Based on expressions for the amplitude and frequency of the parametric excitation, stability boundaries are determined in terms of a nominal spindle velocity, the least common multiple of poles and slots, the magnitude of torque fluctuation and the modal characteristics of. the disk. The stability diagrams predicted by perturbation have been verified numerically using the Floquet theory, which is in good agreement. In conclusion, the fluctuation in spinning velocity is found to affect the stability of the transverse vibration of a rotating disks. The results of this work can be applied to high precision spindle systems such as computer storage systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.69-72
• /
• 2003

This paper presents a current-mode multiple-input minimum circuit. The proposed circuit can be implemented by applying De Morgan’s law. The circuit diagram is simple and modular. It operates using a single 2.5V supply and has very low dissipation. The realization method is suitable for fabrication using CMOS technology and all transistors are operated in their saturation region. The performances of this proposed circuit were studied using the PSPICE analog simulation program. The simulation results show the approval of this circuit that it has adequate basic performances for a real-time fuzzy controller and a fuzzy computer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.637-642
• /
• 2004

This paper presents a new shape design method for the multi-mode sensor that can detect selected multiple modes for the active vibration control of mechanical structures. The structure used for this study is an isotropic cantilever beam type with a PVDF(polyvinylidene fluoride) which is bonded onto the structure as a sensor. Characteristic behaviors of the sensor are related with the electrode shapes of PVDF. The shape optimization problem is solved by defining a new multi-objective function and using the genetic algorithm. Resulting electrode shape functions have good performances to detect the multiple vibration modes. The results of analytical simulations are compared with those of experiment works. The results agree well each other. Hence, the obtained experimental results give evidence for the validity of the presented theoretical analysis of the electrode shape design problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1192-1195
• /
• 2005

This paper presents the realization of a multiple-input maximum circuit, which is operated in a current-mode. The proposed circuit operates with bi-directional input current signal and employs 5n+4 transistors for n inputs. The realization method is suitable for fabrication using CMOS technology. The proposed circuit is useful building block for the real-time systems. The performances of the proposed bi-directional maximum circuit were studied using the PSPICE analog simulation program. The simulation results verified the circuit performances are agreed with the expected values.