• Korean Journal of Materials Research
• /
• v.1 no.1
• /
• pp.9-17
• /
• 1991

TiC coating formed on $Si_3N_4-TiC$ composite ceramic by chemical vapor deposition (CVD) has an improved microstructures, better thermal shock resistance and interfacial bonding than TiN coating does. TiN coating formed by CVD, however, has lower friction coefficients against steels and better chemical stability. The experimental results indicate that the coated insert is superior to the uncoated one in flank and crater wear resistance. And the multilayer coating shows an improved wear resistance than the monolayer coating.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.4
• /
• pp.119-125
• /
• 2013

To enhance the cutting performance of high speed steel(HSS) endmill, single and multilayer coating is applied on the substrated of the HSS endmill. Coating material reduces cutting force and enhances resistance against abrasive wear. This paper presents the physical vapour deposition(PVD) coating technology and evaluate the PVD coated HSS endmill. The performance of coated HSS endmills are fifteen times better than uncoated HSS endmill on proposed cutting conditions. The TiAlN monolayer coated endmills(futura nano coating) are better than those of multilayer coated endmills(futura coating) on machined surface and tool wear.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.235-235
• /
• 2013

We reported on the characteristics of organic solar cells (OSCs) fabricated on $HNO_3$-treated multilayer graphene (MLG) transparent electrodes. MLG electrodes were prepared using a chemical vapor deposition and a multi-transfer process. Compared to organic solar cells (OSCs) on the ITO electrodes had a fill factor of 65.97%, and a power conversion efficiency (PCE) of 3.364%, OSCs on the MLG (three-layer graphene) electrodes with sheet resistance of $274{\pm}1{\Omega}$/square and transparency of 92.1% had a fill factor of 43.46%, and a power conversion efficiency (PCE) of 2.019%. However, OSCs on the HNO3-treated MLG electrodes with lower sheet resistance of $119{\pm}1{\Omega}$/square had a fill factor of 57.54%, and a PCE of 2.861%. The results would provide a promising method to improve the performance of large-area OSCs based on MLG electrodes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.609-612
• /
• 1999

Organic electroluminescent(EL) devices have received a great deal of attention due to their potential application as full-color displays. They are attractive because of their capability of multicolor emission, ease of fabrication, and operation at a low driving voltage. In this study, single and multiple quantum-well structures consisting of Eu(TTA)$_3$(bpy) complex well layer sandwiched between triphenyldiamine derivative (TPD) layers were fabricated and their photoluminescent electroluminescent characteristics were also investigated. Sharp emission at 616 nm has been observed from the Eu complex in multilayer, single and multiple quantum-well structures. Details on the explanation of electrical properties of these structures will be discussed.

• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.37-40
• /
• 2007

The electrostatic layer-by-layer technique provides a convenient way to control the construction of ultrathin films at nano-scale ranges and can be easily obtained. It can be also applicable to fiber substrate with dye compounds. We have fabricated multilayer dye films using diazonium resin and three couplers, which are prepared by self-assembly approach. This method is based on layer-by-layer deposition using electrostatic attraction between oppositely charged ions. Beside, the diazo coupling reaction proceeded to form azo dye layer on the PET fibers the same time. The corresponding results of the multilayer films have been discussed on the level of color strength (K/S).

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.82-89
• /
• 1997

Dependence of magnetoresistance on the thickness of Cu, type and thickness of buffer layer, and the stacking number of multilayer in the form buffer /$[Co(17{\AA}/Cu(t{\AA})]_{20}$ were investigated. To evaluate effect of annealing on this samples, X-ray diffraction analysis, vibrating sample magnetometer analysis, and magnetoresistance measurement (4-probe method) were performed. The magnetoresistance ratio exhibits a maximum of 21% for the multilayer with Cu thickness of 24$\AA$ and Fe buffer layer thickness of 50$\AA$. Deposition of film under low base pressure induces in increase magnetoresistance ratio by preventing oxidation. The multilayer annealed below 30$0^{\circ}C$ temperature allowed larger textured grain without loss in the periodicity. Magnetoresistance ratios of the multilayer with Cu thickness of 24$\AA$ and 36$\AA$ were increased due to the increase in the antiferromagnetically coupled fraction after annealing.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.285-291
• /
• 2020

Recent advances in technology using ultra-thin noble metal film in oxide/metal/oxide structures have attracted attention because this material is a promising alternative to meet the needs of transparent conduction electrodes (TCE). AZO/Ag/AZO multilayer films are prepared by magnetron sputtering for Cu₂ZnSn(S,Se)₄ (CZTSSe) of kesterite solar cells. It is shown that the electrical and optical properties of the AZO/Ag/AZO multilayer films can be improved by the very low resistivity and surface plasmon effects due to the deposition of different thicknesses of Ag layer between oxide layers fixed at AZO 30 nm. The AZO/Ag/AZO multilayer films of Ag 15 nm show high mobility of 26.4 ㎠/Vs and low resistivity and sheet resistance of 3.58^⁎10^-5 Ωcm and 5.0 Ω/sq. Also, the AZO/Ag (15 nm)/AZO multilayer film shows relatively high transmittance of more than 65 % in the visible region. Through this, we fabricated CZTSSe thin film solar cells with 7.51 % efficiency by improving the short-circuit current density and fill factor to 27.7 mV/㎠ and 62 %, respectively.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.71-74
• /
• 1999

We have fabricated high-T$_c$ superconducting YBa$_2Cu_3O_{7-{\delta}}\;/SrTiO_3/\;YBa_2Cu_3O_{7-{\delta}}$ (YBCO/STO/YBCO) multilayer structure on (001) $SrTiO_3$ substrate by using pulsed laser deposition technique for applying to ground plane of single flux quantum digital circuits. In this structure, the top and bottom YBCO layers were connected through the holes in the STO insulating layer. The critical temperature of the two YBCO layers connected each other was 86 K after annealing at 500 $^{\circ}C$ in $O_2$ atm for about 60 hr. This result shows that the annealing process is very important fabricating YBCO/STO/YBCO multilayer structure An experiment to optimize the fabrication process of YSCO/ST0/YBCO multilayer structure with good quality is in progress.

• Macromolecular Research
• /
• v.15 no.7
• /
• pp.688-692
• /
• 2007

The hydrogen-bonding induced alternating multilayer thin films of dendrimers and block copolymer micelles were demonstrated. The block copolymer micelles derived from amphiphilic poly(2-ethyl-2-oxazoline)block-$poly({\varepsilon}-carprolactone)$ (PEtOz-PCL) in aqueous phase have a core-shell structure with a mean hydrodynamic diameter of 26 nm. The hydrogen bonding between the PEtOz outer shell of micelle and the carboxyl unit of poly(amidoamine) dendrimer of generation 4.5 (PAMAM-4.5G) at pH 3 was utilized as a driving force for the layerby-layer alternating deposition. The multilayer thin film was fabricated on the poly(methyl methacrylate) (PMMA) thin film spin-coated on silicon wafer or glass substrate by the alternate dipping of PEtOz-PCL micelles and PAMAM dendrimers in aqueous solution at pH 3. The formation of multilayer thin film was characterized by using ellipsometry, UV-vis spectroscopy, and atomic force microscopy. The PEtOz outer shell of PEtOz-PCL micelle provided the pH-responsive hydrogen bonding sites with peripheral carboxylic acids of PAM AM dendrimer. The multilayer thin film was reversibly removed after dipping in aqueous solution at $pH{\geq}5.6$ due to dissociation of the hydrogen bonding between PEtOz shell of PEtOz-PCL micelle and peripheral carboxyl units of PAMAM dendrimer.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.198-199
• /
• 2002

진공 증착장비에서 다층박막으로 구성된 광학필터를 증착할 경우, 증착되는 동안 설계된 최종 광학필터의 성능을 구현하기 위해서는 실시간으로 각각의 층들에 대한 굴절률(n)과 물리적 두께(d)를 제어하거나 또는 광학적 두께(nd)를 제어해야 한다. 광학적 두께를 제어하는 대표적인 예로 광모니터링 방법이 있는데, 증착되는 기판에 직접 빛을 입사시켜 기판에서 반사된 빛이나 투과된 빛의 세기를 측정하여 증착과정을 제어하는 방법이다. (중략)