• 센서학회지
• /
• 제23권4호
• /
• pp.245-250
• /
• 2014

When the charged particle travels in transparent medium with a velocity greater than that of light in the same medium, the electromagnetic field close to the particle polarizes the medium along its path, and then the electrons in the atoms follow the waveform of the pulse which is called as Cerenkov light or radiation. This type of radiation can be easily observed in a spent fuel storage pit. In optical fibers, the Cerenkov light also can be generated due to their dielectric components. Accordingly, the radiation-induced light signals can be obtained using optical fibers without any scintillating material. In this study, to measure the intensities of Cerenkov radiation induced by gamma-rays, we have fabricated the fiber-optic Cerenkov radiation sensor system using silica optical fibers, plastic optical fibers, multi-anode photomultiplier tubes, simulated spent fuel assembly and a scanning system. To characterize the Cerenkov radiation generated in optical fibers, the intensities of Cerenkov radiation generated in the silica and plastic optical fibers were measured. Also, we measured the longitudinal distribution of gamma rays emitted from the Ir-192 isotope by using the fiber-optic Cerenkov radiation sensor system and simulated spent fuel assembly.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.224-234
• /
• 2008

Multi-phase machines can be used in variable speed drives. Their applications include electric ship propulsion, 'more-electric aircraft' and traction applications, electric vehicles, and hybrid electric vehicles. Multi-phase machines enable independent control of a few numbers of machines that are connected in series in a particular manner with their supply being fed from a single voltage source inverter(VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases more than or equal to five-phase. The number of series-connected machines is a function of the phase number of VSI. Theoretical and simulation studies have already been reported for number of multi-phase multi-motor drive configurations of series-connection type. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information concerning the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an MRAS estimator based sensorless control of a vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed-voltage, fixed-frequency supply, and hysteresis current control are presented for various operating conditions on the basis of simulation results. The purpose of this paper is to report the first ever simulation results on a sensorless control of a five-phase two-motor series-connected drive system. The operating principle is given followed by a description of the sensorless technique.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.1-9
• /
• 2000

The paper describes system design of next-generation Ship Simulator using Virtual Reality (VRSS), well known as human-computer interaction. VRSS system is required to have special condition that comprises multiple user participants such as captain, officer, pilot, and quartermaster. To cope with that condition, core technologies were explored and proposed multi-networking system with broker server. The evaluation of the proposed system was done with PC-based immersion-type VR device, constituted with HMD (Head Mounted Display), Head Tracking Sensor, Puck, Headphone, and Microphone. Using the VR device, assessment test was carried out in a virtual bridge with 3D objects, which are created by VRML (Virtual Reality Model Language) program. As results of tests, it is shown that the cybernetic 3D objects were act as if real things in a real ship's bridge. Therefore, interesting interaction with participants can be obtained in the system, Thus, we found that the proposed system architecture can be applicable to VRSS system construction.

• 한국지반공학회논문집
• /
• 제28권6호
• /
• pp.39-52
• /
• 2012

연약지반 계측에 있어, 원거리 측량에 의한 지표침하 측정 및 수동 방식의 층별침하 측정 방식을 탈피하고 기존 자동 침하 계측기술의 한계를 극복하고자, 디지털 홀센서를 이용한 자력감지 시스템 및 원위치 지반침하 자동 계측시스템을 개발하였다. 본 연구를 통한 개발 시스템은 지표침하와 다수 층별침하를 NX 규격의 단일 시추공내에서 동시에 측정할 수 있다. 개발 시스템의 실제 연약지반 개량현장 적용 및 기존 수동계측 결과와의 비교, 분석을 통해 그 기술검증 및 안정성을 확인할 수 있었다.

• 센서학회지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2009

It is said that the desirable bio-signal measurement and stimulation system should be an implantable type if the several problems such as biocompatibility, electrical safety, and so on are overcome. In addition to the biocompatibility issue, a robust RF communication and a stable electrical power source for the implantable bio-signal measurement and stimulation system are very important matters. In this paper, a wireless telemetry system which adopts the FCC's approved MICS (medical implant communication service) protocol and a wireless power transmission has been proposed. The proposed system composed of a base station (BS) and an implantable medical device (IMD) has the advantages that the interference with other RF devices can be reduced by the use of the specially assigned MICS frequency band of 402.MHz to 405 MHz. Also, the proposed system includes various functions of a multi-channel bio-signal acquisition and an electric stimulation. Since the electrical power for the IMD can be provided by the inductive link between PCB patterned coils, the IMD needs no battery so that the IMD can be smaller size and much less dangerous than the active type IMD which includes the internal battery. Finally, the validity as a wireless telemetry system has been demonstrated through the experiments by using the implemented BS and IMD.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.151-159
• /
• 2015

In this study, we developed an automated contact-type thickness measurement machine that continuously and precisely measures the thickness of a PCB module product using multi-LVDT sensors. The system contains a measurement part to automatically measure the thickness in real time according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The sensors were calibrated before assembly in the measuring machine, and precision and accuracy performance tests were also performed to reduce uncertainty errors in the measurement machine. In the calibration test, the precision errors of the LVDT sensor were determined to be $1-3{\mu}m$ as 0.1% at the measuring range. A measurement error of 0.8 mm and 1.0 mm thickness test standards were found to be $1{\mu}m$ and $4{\mu}m$, and the standard deviations of two 1.0 mm products were measured as $14{\mu}m$ and $8{\mu}m$, respectively. In the measurement system analysis, the accuracies of test PCB standards were found to be $2{\mu}m$ and $3{\mu}m$, respectively. From the results of gage repeatability and reproducibility (R & R) crossed, we found that the machine is suitable for the measurement and process control in the mass production line as 7.92% of total gage R & R and in seven distinct categories. The maximum operating speed was limited at 13 pcs/min, showing a value good enough to measure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.883-886
• /
• 2005

This paper proposed a wireless measurement system (WMS) for an effective condition monitoring using wireless communication. WMS consists of two parts: transmitter(TM) acquired a dynamic signal from physical system using ICP type accelerometer sensor. An acquired signal modulated through the low/high pass filter and amplifier in DAQ board, which converted to digital signal. Embedded board(E-board) transferred digital signals to base station(BS) through the socket IEEE.802.11.b. BS is adopted IOCP server structure. Because it can acquired signal well during transferred digital signal. Signal processing used LabVIEW Library, BS(server) designed to realize multi-thread using visual C++.NET for 1 many meaning data processing

• 융합정보논문지
• /
• 제10권10호
• /
• pp.47-52
• /
• 2020

일반적인 평판 프린터 시스템은 PC와 전용 S/W로 구성되어 사용에 불편함이 존재한다. 결국, 평판 프린터 시스템 구성의 간소화, 스마트화 등을 통해 다양한 형태의 프린팅을 쉽고 편리하게 사용할 수 있는 기술이 필요하다. 즉, 한 대의 프린터로 여러 종류의 소재에 인쇄가 가능하며, 다양한 형태의 상품을 인쇄할 수 있는 다입체 프린터에 대한 수요가 증가하고 있다. 따라서, 본 논문에서는 Head Encoder/Trigger 제어를 이용하여 다입체 인쇄가 가능한 평판 프린터 시스템을 개발하였다. 이를 위해, 평판 프린터 내부 모듈을 입력 형태 감지 센서를 연계시키고, 별도의 메인 콘트롤러를 통해 프린터의 Head Encoder와 Head Trigger 신호에 의해 모든 동작 상태를 제어하는 평판 프린터를 개발하였다. 이를 통해, IoT 기술의 발전 및 보급의 확산으로 산업 전반에 걸쳐 스마트 환경의 프린터 제어가 발전된 형태로 확대될 것이며, 향후 3D 프린팅 산업 발전에 기여할 것으로 기대된다.

• 방송공학회논문지
• /
• 제16권3호
• /
• pp.561-565
• /
• 2011

본 논문에서는 기존의 베이어 컬러필터 배열 기반의 영상 센서를 사용하는 카메라에서 개선된 컬러 영상을 생성하기 위한 영상 시스템을 제안한다. 제안한 컬러 영상 생성 기술은 두 장의 연속적인 영상(광대역 G채널 필터를 사용한 영상과 색필터를 적용하지 않고 연속적으로 촬영한 영상)으로부터 RGBCY의 다양한 색 정보를 추출하여 디모자이킹을 위한 컬러 영상 보간의 계산은 감소시키며 개선된 색상 정보를 가지는 영상을 얻을 수 있다. 또한 기존의 베이어 CFA 영상센서를 사용하기 때문에 새로운 형태의 CFA를 제작할 필요 없이 다중 스펙트럼 영상을 취득할 수 있는 카메라 시스템으로 확장 가능하다. 마지막으로 본 논문에서 제안한 컬러영상 생성을 위한 카메라 시스템의 성능을 검증하기 위해서 기존의 디모자이킹 기술과 비교하였으며, 그 결과 컬러 중첩 현상이 상당히 개선되었음을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.1023-1026
• /
• 2006

가정이나 병원 등 해상에서 위급한 환자를 모니터링 할 때 현재의 심전도 측정기의 전극센서가 불편할 경우가 많다. 구급차량 내에서나 선박에서 환자를 측정시 흔들림이 심하기 때문에 전극이 떨어져 측정이 쉽지가 않으며 또 환자의 몸에 지방분이나 습기가 많을 경우를 쉽게 붙어있지 않아 측정이 더욱 힘들어진다. 본 연구에서는 환자가 언제든지 전극을 붙이고 화장실이나 외출까지도 자유롭게 할 수가 있도록 하였으며 또 흉부에 쉽게 착용이 용이하도록 부드러운 벤드 형태로 설계되었다. 심전도의 전극소재로는 전기저항특성이 우수하고 피부 트러블이 거의 없는 금을 소재로 한 제품을 적용하였으며 광전용적맥파 및 말초체온 등을 추가로 설계하여 다중생체신호를 모니터링 할 수 있도록 구현하였다. 본 실험에서는 가승이나 늑골부위에서는 생체신호전달이 좋았으며, 환자의 복부부위에서는 생체신호가 아주 작게 검출되었다. 전극소재로 금 전극을 사용하여 일반적인 전극을 이용할 때 보다 신호 검출이 우수하다는 결과를 얻었으며. 일반적인 전극은 단순1회용으로 끝나지만 금 전극센서는 반영구적이면서도 환자가 이동시 접촉력이 우수하여 보다 정확한 데이터를 얻을 수가 있었다.