Browse > Article
http://dx.doi.org/10.22156/CS4SMB.2020.10.10.047

Development of Multi-dimensional Flatbed Printer using Head Encoder and Trigger Control  

Kim, Bong-Hyun (School of IT, Dept. of Computer Engineering, Seowon University)
Publication Information
Journal of Convergence for Information Technology / v.10, no.10, 2020 , pp. 47-52 More about this Journal
Abstract
The general flatbed printer system is composed of a PC and a dedicated S/W, which is inconvenient to use. In the end, there is a need for a technology that can easily and conveniently use various types of printing through simplification, smartization, etc. of a flatbed printer system configuration. That is, there is an increasing demand for multi-dimensional printer capable of printing on various types of materials with one printer and capable of printing various types of products. Therefore, in this paper, we developed a flatbed printer system capable of multi-dimensional printing using Head Encoder/Trigger control. To this end, we developed a flatbed printer that connects the internal module of the flatbed printer with an input type detection sensor and controls all operating states by the head encoder and head trigger signals of the printer through separate main controllers. Through this, the development and diffusion of IoT technology will expand the printer control of the smart environment to the developed form throughout the industry. It is expected to contribute to the development of the 3D printing industry in the future.
Keywords
Multi-dimensional; Flatbed printer; Head Encoder; Head Trigger; Printer control;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 L. Blanken. J. Willems. S. Koekebakker & T. Oomen. (2016). Design Techniques for Multivariable ILC: Application to an Industrial Flatbed Printer. IFAC-PapersOnLine, 49(21), 213-221. DOI : 10.1016/j.ifacol.2016.10.552
2 C. J. Lee & J. N. Sohn. (2014). Plans for 3D printers Diffusion -Focusing on production figures-. Journal of Digital Convergence, 12(9), 335-341. DOI : 10.14400/JDC.2014.12.9.335   DOI
3 H. W. Park & J. H. Lee. (2016). Study on 3D Printing Industry's Development Method Through Seeking New Industry Development Strategy of Creative Economy. Journal of Communication Design, 56, 102-111.
4 Kimura A. Gao W. Kim W. Hosono K. Shimizu Y. Shi L & Zeng L. (2012). A sub-nanometric three-axis surface encoder with short-period planar gratings for stage motion measurement. Precision Engineering, 36(4), 576-585. DOI : 10.1016/j.precisioneng.2012.04.005   DOI
5 S. K. Chen & L. Hollender. (1995). Digitizing of radiographs with a flatbed scanner. Journal of Dentistry, 23(4), 205-208. DOI : 10.1016/0300-5712(95)91183-n   DOI
6 S. K. Park. (2016). Proposal of a mobility management scheme for sensor nodes in IoT(Internet of Things). Journal of Convergence for Information Technology, 6(4), 59-64. DOI : 10.22156/CS4SMB.2016.6.4.059
7 J. Bolder. J. van Zundert. S. Koekebakker & T. Oomen. (2017). Enhancing Flatbed Printer Accuracy and Throughput: Optimal Rational Feedforward Controller Tuning Via Iterative Learning Control. IEEE Transactions on Industrial Electronics, 64(5), 4207-4216. DOI : 10.1109/tie.2016.2613498   DOI
8 K. H. Ryu & J. H. Seo. (2017). Utilization of 3D CAD and 3D Printer and UV Curavle resin Casting Defect. Journal of the Korea Convergence Society, 8(3), 169-176. DOI : 10.15207/JKCS.2017.8.3.169   DOI
9 Sharad Joshi & Nitin Khanna. (2020). Source Printer Classification Using Printer Specific Local Texture Descriptor. IEEE Transactions on Information Forensics and Security, 15, 160-171.   DOI
10 Q. Liu, Z. Huang, M. R. Pointer & M. R. Luo. (2019). Optimizing the Spectral Characterisation of a CMYK Printer with Embedded CMY Printer Modelling. Applied Sciences, 9(24), 5308.   DOI
11 S. H. Yoon, S. G. Lee, M. O. Cho & J. K. Kim. (2010). Two-Dimensional Patterning of Bacteria by Inkjet Printer. Journal of Mechanical Science and Technology, 34(1), 89-94. DOI : 10.3795/KSME-B.2010.34.1.89
12 T. Xu, S. Petridou, E. H. Lee, E. A. Roth, N. R. Vyavahare, J. J. Hickman & T. Boland. (2004). Construction of High-density Bacterial Colony Arrays and Patterns by the Ink-jet Method. Biotechnol. Bioeng. 85(1), 29-33.   DOI
13 J. H. Cho. (2015). An Analysis on the Effects of 3D Printers on Visual Entertainment. Journal of the Korean Society of Design Culture, 21(2), 589-599.