• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.218-228
• /
• 2021

본 논문에서는 다중공진회로를 이용한 고효율 DC-DC 컨버터를 제안한다. 제안한 컨버터는 하프브리지 전력구조이며 컨버터의 고효율화를 위해 2개의 인덕터(LL)와 1개의 커패시터(C)로 구성된 다중공진회로를 이용한다. 이 다중공진회로는 동작모드에 따라, 각각의 공진주파수를 가진 직렬회로 형태의 공진회로를 각각 형성한다. 본 논문에서는 먼저, 동작모드와 정상상태 기본파 근사 모델링에 의해 제안한 컨버터의 동작원리를 설명한다. 그다음 이에 근거하여 제안한 컨버터의 설계예시를 보인다. 그리고 설계된 회로 파라미터에 의해 제작된 프로토타입 컨버터의 실험결과를 통하여 제안한 컨버터의 고효율 DC-DC 전력변환 동작특성을 입증한다.

• 조명전기설비학회논문지
• /
• 제12권3호
• /
• pp.114-123
• /
• 1998

The multi-resonant converter(MRC) minimizes a parasitic oscillation by using the resonant tank circuit absorbed parasitic reactances existing in a converter circuit. So it si possible that the converter operated at a high frequency has a high efficiency because the losses are reduced. Such a MHz high frequency applications provide a high power density [W/inch3] of the converter. But the resonant voltage stress across a switch of the resonant tank circuit is 4~5 times a input voltage. This h호 voltage stress increases the conduction loss because of on-resistance of a MOSFET with higher rating. Thus, in this paper we proposed the alternated multi-resonant converter (AT MRC) differ from the clamp mode multi-resonant converter and applicated it to the forward MRC. The AT forward MRC can reduce the voltage stress to 2~3 times a input voltage by using two series input capacitor. The control circuit is simple because tow resonant switches are driven directly by the output pulse of the voltage controled oscillator. This circuit type is verified through the experimental converter with 48V input voltage, 5V/50W output voltage/power and PSpice simulation. the measured maximum voltage stress is 170V of 2.9 times the input voltage and the maximum efficiency of 81.66% is measured.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1250-1254
• /
• 2007

The multi-resonant(MR) converter has a characteristics that the parasitic components existing in the converter are absorbed into the resonant circuits. The designed MR converter could be got a high efficiency and a high power density because the switching power losses are reduced effectively due to resonant switching circuit. However, the high resonant voltage stress of switching power devices leads to the conduction loss. In this paper, it is proposed the novel alternated(AT) flyback multi-resonant converter to overcome such a drawback. The suggested converter dc input is divided by two series input filter capacitors. The resonant stress voltage is reduced to 2-3 times the input voltage without any complexity and it provides the various circuit schemes in lots of applications. The proposed flyback MR converter is verified through simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1065-1066
• /
• 2006

The multi-resonant converter minimizes the parasitic oscillations using the resonant tank circuit absorbed parasitic reactances in a converter. So the converter can be operated at a high frequency and it provides a high efficiency because the switching power losses are reduced effectively. However, the high resonant voltage stress of semiconductors leads to the conduction loss. In this paper, it is proposed the novel flyback multi-resonant converter. The converter input is divided by two series input capacitors. And also the resonant stress is reduced to 2-3 times input voltage without any complexity and it provides the various circuit schemes in lots of applications. The proposed converters are verified through simulation and experiment.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.71-78
• /
• 2005

본 연구는 AC PDP(Plasma Display Panel)용 멀티레벨 에너지 회수회로에 관한 연구로서, 기존 멀티레벨 구동회로의 문제점을 해결한 새로운 멀티레벨 구동회로를 제안한다. 기존 멀티레벨 구동회로는 Weber회로에서 나타나는 스위칭 소자의 전압 및 전류 스트레스를 개선하였지만 공진 인덕터와 기생 커패시턴스에 의한 기생공진전류가 존재하고 하드스위칭이 발생하며 또한 천이구간이 다소 긴 문제점이 있다. 제안 회로는 사용소자의 수를 줄여 회로를 간단히 하였으며, 기생공진전류를 제거하여 회로 동작의 안정성을 높였다. 또한 CIM(Current Injection Method) 을 사용하여 하드스위칭 문제를 해결하였으며 Vs/2 유지구간을 제거하여 동작주파수를 증가시킬 수 있도록 하였다. 제안 회로의 유용성을 입증하기 위해 모드별로 동작을 해석하였으며, PSpice프로그램을 이용하여 시뮬레이션하고 그 결과를 확인하였다.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.194-202
• /
• 2005

본 연구는 새로운 AC PDP(Plasma Display Panel)용 멀티레벨 에너지 회수회로에 관한 연구로서, 기존 멀티레벨 구동회로의 장점을 그대로 유지하면서 문제점을 해결한 새로운 멀티레벨 구동회로를 제안한다. 기존의 멀티레벨 구동회로는 Weber회로의 하드스위칭 문제를 개선하였지만 공진 인덕터에 기생공진전류가 존재하고 Vs/2유지구간이 존재한다. 제안한 회로는 기존 회로에 비해 인덕터의 수를 반으로 줄여 회로를 간단히 하고 공진 인덕터의 기생 공진전류와 Vs/2유지구간을 제거하였으며 CIM(Current Injection Method)을 사용하여 하드스위칭 문제를 해결하였다. 또한 풀브리지 구동회로에 직렬 연결된 스위칭 소자에 NPC(Neutral Point Clamping)기법을 적용하여 각 스위칭 소자에 전압이 균등하게 분배되도록 하였다. 그리고 제안회로의 동작을 모드별로 해석하였으며, PSpice 프로그램으로 시뮬레이션하고 회로를 구성하여 실험함으로써 제안한 회로의 유용성을 입증하였다.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.458-465
• /
• 2013

This paper proposes a novel soft-switched auxiliary resonant circuit to provide a Zero-Voltage-Transition at turn-on for a conventional PWM boost converter in a PFC application. The proposed auxiliary circuit enables a main switch of the boost converter to turn on under a zero voltage switching condition and simultaneously achieves both soft-switched turn-on and turn-off. Moreover, for the purpose of an intelligent multi-chip power module fabrication, the proposed circuit is designed to satisfy several design constraints including space saving, low cost, and easy fabrication. As a result, the circuit is easily realized by a low rated MOSFET and a small inductor. Detail operation and the circuit waveform are theoretically explained and then simulation and experimental results are provided based on a 1.8 kW prototype PFC converter in order to verify the effectiveness of the proposed circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1380-1382
• /
• 2005

The multi-resonant converter minimizes a parasitic oscillation by using the resonant tank circuit absorbed parasitic reactance existing in a converter circuit. So it is possible that the converter operated at a high frequency has a high efficiency because the losses are reduced. However, the resonant voltage stress across a switch is four or five times a input voltage. This high voltage stress increases the conduction loss. In this paper, we proposed the AT flyback multi-resonant converter. The proposed converter can reduce the voltage stress to two or three times by using two series input capacitors. The operational principle of the proposed converter was verified through the experimental converter.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권6호
• /
• pp.314-324
• /
• 2006

In recent years, having the advantages of being small, low in cost and high in efficiency, Half-wave resonant type, (having only one output diode), is used in ZVS Half-Bridge DC/DC converter. This paper presents the operation mode by multi-resonant factors in the Half-wave type multi-resonant converter with direct Buck chopper circuit operated in discontinuous current mode. To study the characteristics of a multi-resonant operation in steady-state, the characteristic impedances in each mode and safe operation-region(S.O.R) are reported. Computer simulation and experimental data are also riven to verify the theoretical results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.70-76
• /
• 2000

In the charge system, a contact type-convenient-charging method is insufficient because of the contact failure around moist environment and troublesome question to put in and pull out. For the solution of this problem, an electromagnetically coupled non-contact charger for the rechargeable cell is proposed using ZVS multi-resonant forward converter with synchronous rectifier. In this paper coupling coefficient(k), leaking inductance, coupling inductance and resonant frequency are observed for the air gap. By using the observed value, this circuit is designed and implemented. This proposed circuit is simulated by the PSPICE and experimented. The stress of a main switch and the output power are measured.