• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.728-733
• /
• 2008

Though multi-panel structures lined with a poroelastic material have been widely used to reduce sound transmission in various fields, most of the previous works to design them were conducted by repeated analyses or experiments based on initially given configurations or sequences. Therefore, it was difficult to obtain the optimal sequence of multi-panel structures lined with a poroelastic material yielding superior sound isolation capability. In this work, we propose a new design method to sequence a multi-panel structure lined with a poroelastic material having maximized sound transmission loss. Being formulated as a one-dimensional topology optimization problem for a given target frequency, the optimal sequencing of panel-poroelastic layers is systematically carried out in an iterative manner. In this method, a panel layer is expressed as a limiting case of a poroelastic layer to facilitate the optimization process. This means that main material properties of a poroelastic material are treated as Interpolated functions of design variables. The designed sequences of panel-poroelastic layers were shown to be significantly affected by the target frequencies; more panel layers were used at higher target frequencies. The sound transmission loss of the system was calculated by the transfer matrix derived from Biot's theory.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.513-520
• /
• 2014

인간은 유사 이래로 자신을 둘러싼 모든 것들을 본능적으로 미메시스(Mimesis)하고 환영(Illusion)을 생산하며 예술과 문화를 계승 발전시켜왔다. 그 대상으로는 단지 지시할 수 있는 객체만이 아닌 객체를 둘러싼 공간 역시 포함되었다. 르네상스 시대에 등장한 원근법은 서구 역사에 있어 공간을 바라보는 지배적인 방식으로서 자리를 잡았고, 근대 시각 체계를 형성하였다. 오랫동안 원근법에 기반 했던 공간의 연출방식은 디지털 미디어 시대에 접어들면서 다층적 구조를 내포한 수평적 데이터 구성이라는 개념으로 재정의 되었다. 이러한 구성적 특성은 보다 효율적이고 합리적인 방식으로 공간의 사실적 재현을 가능하게 만들었다. 공간의 연출방식은 시각 예술 문화에 있어서 하나의 방법론이라는 외피적 범주를 넘어 세상을 바라보는 인간의 가치관을 반영한다는 의미를 지니므로 디지털미디어 기반의 공간 연출방식에 대한 심도 있는 연구의 필요성이 있다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.288-294
• /
• 2004

In this paper, a ceramic antenna and diplexer are designed for dual-band handset ap plications. Basically, the antenna is designed by using the meander line configuration. The diplexer presented in this paper is composed of both low- and high-pass filters. We have designed the low- and high-pass filters with attenuation poles to improve the attenuation performances of the diplexer. The attenuation poles are located at each rejection frequency region so as to improve the shrinkage characteristic of the diplexer. In order to accomplish the volume effectiveness, the antenna and the diplexer have been designed and fabricated in a multi-layer structure. The diplexer designed with a multi-layer structure has inductors and capacitors, which are implemented by LTCC (Low Temperature Co-fired Ceramics) process technique. Design of the multi-layer antenna and diplexer has been achieved by employing the full 3-D EM simulation. The designed antenna and diplexer offer excellent return loss and broadband performances with highly isolated rejection performance.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.27-33
• /
• 2016

This study was carried out in order to investigate the effect of binder properties in pre-coating layer on the characteristics of top-coating layer and print mottle of coated paper. Four different latices were used as a binder in pre-coating layer, and coating color prepared with a same formulation was applied for top-coating. The properties and print mottle of coated paper were evaluated. It was found that glass transition temperature (Tg) was the important factor to control the properties of pre- and top-coating layer. PPS roughness of coated paper was decreased and paper gloss was increased with applying binder which has lower Tg. Properties of top-coating layer were affected by the binder used in pre-coating layer. Print mottle of coated paper was improved with using binder which has lower Tg in pre-coating layer. These results indicate that final printability and properties of top-coating layer can be improved with using suitable binder in pre-coating layer.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.216-221
• /
• 2017

폴리머 안경렌즈를 제조할 때 가시광선 영역에서 투과되는 빛을 증가시키고, 안경렌즈 표면에 형성되는 허상을 방지하는 반사방지 기능은 매우 중요하다. 본 연구에서는 굴절률 1.56, 1.60 및 1.67을 갖는 안경렌즈를 폴리머 렌즈 모노머 및 이염화 이부틸 주석 촉매제, 알킬 인산 에스터 이형제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여 제조하였다. 폴리머 안경렌즈 표면에서의 반사방지 효과를 조사하기 위하여 다층 박막 반사방지 코팅 구조(양면 또는 단면 코팅), 3층 박막의 Gaussian gradient-index profile 불연속 근사 반사방지 코팅 구조, 3층 박막의 quarter-wavelength 근사 반사방지코팅 구조 등 다양한 반사방지 코팅 구조를 설계하였고, E-beam 증착 시스템을 이용하여 열중합공정으로 제조된 폴리머 안경렌즈에 각각 코팅하였다. 폴리머 안경렌즈의 광학적 특성은 UV-visible spectrometer로 분석하였다. 반사방지 코팅 층을 구성하는 박막의 굴절률, 표면 거칠기 등의 소재 특성은 Ellipsometer와 원자힘 현미경(AFM)으로 분석하였다. 분석결과, 굴절률 1.56의 낮은 굴절률을 갖는 폴리머 안경렌즈에서 가장 효과적인 반사방지 코팅 구조는 다층 박막 반사방지 코팅 구조의 양면코팅이었다. 하지만 굴절률 1.67의 고굴절률 안경렌즈에 대해서는 3층 박막의 Gaussian gradient-index profile 불연속 근사반사방지 코팅 구조의 양면 코팅도 다층박막 반사방지 코팅구조의 양면코팅에 상응하는 반사방지 효과를 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.530-532
• /
• 2008

Inorganic metal multi-layer(IMML) consisting of Al/Al:SiO/Al was developed as a cathode for OLED to reduce the reflectance generated from ambient light. Device structure of green OLED was ITO/2-TNATA/$\alpha$-NPD/$Alq_3$:C545T/Balq/$Alq_3$/LiF/IMML and IMML was composed of three different layers: thin aluminum layer, aluminum layer doped with silicon monoxide and thick aluminum layer. Average reflectance of green OLED was 9.63% while that of conventional OLED with or without polarizer showed the average reflectance of 8.54% and 66% respectively at visible range from 380 nm to 780 nm.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.61-67
• /
• 2016

This study was carried out in order to investigate the effect of pigment properties in a pre-coating layer on the characteristics of a top-coating layer and the print mottle of the coated paper. Five different pigments were applied for this study as raw materials for the pre-coating layer. The properties and print mottle of the coated paper samples were evaluated according to the coating color formulation. Type of pigments appliied in a pre-coating layer was one of the most important factor to control the properties of pre and top coating layer. Surface properties of pre and top coated paper were improved by blending GCC which had smaller particle size, with clay. Properties of a top-coating layer was affected by the pigment properties used in the pre-coating layer. It was found that print mottle of coated paper can be improved by replacing part of GCC with smaller particle size GCC or clay in pre-coating layer.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.776-782
• /
• 2018

After CNN basic structure was introduced by LeCun in 1989, there has not been a major structure change except for more deep network until recently. The deep network enhances the expression power due to improve the abstraction ability of the network, and can learn complex problems by increasing non linearity. However, the learning of a deep network means that it has vanishing gradient or longer learning time. In this study, we proposes a CNN structure with MLP layer. The proposed CNNs are superior to the general CNN in their classification performance. It is confirmed that classification accuracy is high due to include MLP layer which improves non linearity by experiment. In order to increase the performance without making a deep network, it is confirmed that the performance is improved by increasing the non linearity of the network.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1330-1334
• /
• 2012

잠수함이 가장 취약한 시기는 잠수함이 스노클이나 잠망경 운용을 위하여 잠망경 심도로 항해할 경우이며, 이때에는 비음향 탐지센서인 레이더와 광학, 사람에 의한 시각에 탐지될 확률이 매우 높다. 따라서 본 논문에서는 이러한 상황에서 탐지되는 취약성을 극복하고자 잠수함 마스트 및 잠망경 부분에 비음향 스텔스를 적용하고자 한다. 먼저 비음향 탐지센서에 대해서 조사하고, 그에 따른 스텔스 기법을 분야별 분석하여 최적화한 결과 다층형 구조로 선체표면부터 RAM layer, IR layer, Camouflage layer 구조로 각각 RAM layer는 자성재료인 페라이트계열로 3~5 mm, IR layer는 Ceramic 또는 Nickel 계열로 1~2 mm, Camouflage layer는 군청색 계열 페인팅을 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.381-384
• /
• 2000

Multi-disciplinary optimization design concept can provide a solution to many engineering problems. In the field of structural analysis, much development of size or topology optimization has been achieved in the application of research. This paper demonstrates an optimum design of a multi-layer cylindrical tube which behaves thermoelastically. A multi-layer cylindrical tube that has several different material properties at each layer is optimized within allowable stress and temperature range when mechanical and thermal loads are applied simultaneously. To analyze these problems using an efficient and precise method, the optimization theories are adopted to perform thermoelastic finite element analysis.