• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1246-1254
• /
• 2018

The importance of performing Level 3 probabilistic safety assessments (PSA) along with a general interest in assessing multi-unit risk has been sharply increasing after the Fukushima Daiichi nuclear power plant (NPP) accident. However, relatively few studies on multi-unit Level 3 PSA have been performed to date, reflecting limited scenarios of multi-unit accidents with higher priority. The major difficulty to carry out a multi-unit Level 3 PSA lies in the exponentially increasing number of multi-unit accident combinations, as different source terms can be released from each NPP unit; indeed, building consequence models for the astronomical number of accident scenarios is simply impractical. In this study, a new approach has been developed that employs the look-up table method to cover every multi-unit accident scenario. Consequence results for each scenario can be found on the table, established with a practical amount of effort, and can be matched to the frequency of the scenario. Preliminary application to a six-unit NPP site was carried out, where it was found that the difference between full-coverage and cut-off cases could be considerably high and therefore influence the total risk. Additional studies should be performed to fine tune the details and overcome the limitations of the approach.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4347-4366
• /
• 2015

Distinguished with traditional strategies which offload an application's computation to a single server, parallel computation offloading can promote the performance by simultaneously delivering the computation to multiple computing resources around the mobile terminal. However, due to the variability of communication and computation environments, static application component multi-partitioning algorithms are difficult to maintain the optimality of their solutions in time-varying scenarios, whereas, over-frequent algorithm executions triggered by changes of environments may bring excessive algorithm costs. To this end, an adaptive application component mapping algorithm for parallel computation offloading in variable environments is proposed in this paper, which aims at minimizing computation costs and inter-resource communication costs. It can provide the terminal a suitable solution for the current environment with a low incremental algorithm cost. We represent the application component multi-partitioning problem as a graph mapping model, then convert it into a pathfinding problem. A genetic algorithm enhanced by an elite-based immigrants mechanism is designed to obtain the solution adaptively, which can dynamically adjust the precision of the solution and boost the searching speed as transmission and processing speeds change. Simulation results demonstrate that our algorithm can promote the performance efficiently, and it is superior to the traditional approaches under variable environments to a large extent.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.

• Asia pacific journal of information systems
• /
• 제29권1호
• /
• pp.65-82
• /
• 2019

Technological innovations over the years have accentuated the workings in corporate- connected organizations and different application platforms. Hence, a unified management information system (MIS) that can utilize the Web and propel programming developments is required. Software agents, the latest developments in computer software technology, can be utilized to rapidly and effortlessly build integrated information systems. Consequently, 59 research papers on the use of software agents in MIS were identified from top 40 MIS journals published between 2007 and 2017. Then, we reviewed and classified all the research papers according to two categories: application fields and application categories. The application fields consisted of eight sub-groups: manufacturing, telecommunication systems, traffic and transportation management, information filtering and gathering, electronic commerce, business process management, entertainment, and medical care; whereas the application categories consisted of three sub-groups: multi-agent systems, personal assistants, and multi-agent simulation. The research papers were further divided into journal and year of publication, and journal and application field. The objective of our research was to understand the trend of the use software agent technology in MIS by examining the published research paper beside to add knowledge and content to the information system academic discipline.

• Structural Engineering and Mechanics
• /
• 제30권3호
• /
• pp.331-350
• /
• 2008

A framework for multi-platform analytical and multi-component hybrid (testing-analysis) simulations is described in this paper and illustrated with several application examples. The framework allows the integration of various analytical platforms and geographically distributed experimental facilities into a comprehensive pseudo-dynamic hybrid simulation. The object-oriented architecture of the framework enables easy inclusion of new analysis platforms or experimental models, and the addition of a multitude of auxiliary components, such as data acquisition and camera control. Four application examples are given, namely; (i) multi-platform analysis of a bridge with soil and structural models, (ii) multiplatform, multi-resolution analysis of a high-rise building, (iii) three-site small scale frame hybrid simulation, and (iv) three-site large scale bridge hybrid simulation. These simulations serve as illustrative examples of collaborative research among geographically distributed researchers employing different analysis platforms and testing equipment. The versatility of the framework, ease of including additional modules and the wide application potential demonstrated in the paper provide a rich research environment for structural and geotechnical engineering.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.359-364
• /
• 2003

In this paper, we present multi-sensor data fusion for telematics application. Successful telematics can be realized through the integration of navigation and spatial information. The well-determined acquisition of vehicle's position plays a vital role in application service. The development of GPS is used to provide the navigation data, but the performance is limited in areas where poor satellite visibility environment exists. Hence, multi-sensor fusion including IMU (Inertial Measurement Unit), GPS(Global Positioning System), and DMI (Distance Measurement Indicator) is required to provide the vehicle's position to service provider and driver behind the wheel. The multi-sensor fusion is implemented via algorithm based on Kalman filtering technique. Navigation accuracy can be enhanced using this filtering approach. For the verification of fusion approach, land vehicle test was performed and the results were discussed. Results showed that the horizontal position errors were suppressed around 1 meter level accuracy under simulated non-GPS availability environment. Under normal GPS environment, the horizontal position errors were under 40㎝ in curve trajectory and 27㎝ in linear trajectory, which are definitely depending on vehicular dynamics.

• 대한원격탐사학회지
• /
• 제19권3호
• /
• pp.263-269
• /
• 2003

This research examined the capabilities of KOMPSAT-1 EOC images for the application of urban environment, including the urban changes of the study areas. This research is constructed in three stages: Firstly, for the application of change detection techniques, which utilizes multi-temporal remotely sensed data, the data normalization process is carried out. Secondly, the change detection method is applied for the systematic monitoring of land-use changes. Lastly, using the results of the previous stages, the land-use map is updated. Consequently, the patterns of land-use changes are monitored by the proposed scheme. In this research, using the multi-temporal KOMPSAT-1 EOC images and land-use maps, monitoring of urban growth was carried out with the application of land-use changes, and the potential and scope of the application of the EOC images were also examined.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1356-1364
• /
• 1997

This paper presents a modelling and implementation scheme of a multi directory which provides location and supplementary information of multiple applications in distributed environments. An extrended directory schema and extended DIT(Directory Information Tree) model is proposed for the multi directory. For implementation scheme, an implementation example adapted for the DFR(Document Filing and Retrieval) is shown. In addition, a configuration model for interworking between the DFR and the multi directory, an association mechanisms between two application's operations are also described. In a distributed environment, the interworking between the DFR and a multi directory implemented by using QUIPU 8.0 of ISODE(ISO Development Environment) directory system is tested. Based on the result of this paper, an extended model ofthe directory system is proposed for providing search operation of various application' objects.

• 한국컴퓨터정보학회지
• /
• 제2권2호
• /
• pp.27-40
• /
• 1996

During the 21st century of informational society, in the learning of various field will utilize the education using multi-media more extensively than ever before. The biggest question is how effective the education using multi-media will be. For effective education, wide-spread supply of not only the hardware and various kinds of CBT or CAI that are being developed in the learning of various fields. It is also felt that the skill for application of more convenient multi-media authoring tool is needed. If the producter of such multi-media authoring tool can store various types of information in a form of data bank, accessing the right information at right time and its application would be possible. It can also provide a lot of information to many out-of town learmers. As seen above, the scope of usage for multi-media authoring tool will be broadened. However, no matter how excellent the Authoring Tool is, the results can be very different depending on the method employed. In order to develop CBT or CAI that can be better used in the learning of various fields, examination and on-site training, more reseach should be done in Authoring Tool using virtual reality and artifical intelligence technology.

• 교육시설
• /
• 제12권6호
• /
• pp.5-17
• /
• 2005

The purpose of the study is to propose architectural design standards of the Multi-purpose Auditorium planning in educational facilities. The success of the design is measured by how well variable elements are applied to parts of Multi-purpose Auditorium and designed and equipped so that all groups-amateurs, professionals, youth, and adult alike-may use it effectively. The use of this facility will extend over a wide range, including concerts, plays, motion pictures, forums, and other forms of presentation. The wall, stage, roof, windows, and furnitures are important parts of Multi-purpose Auditorium and variable elements can applied to these parts. To successfully application of variable elements, it is necessary that these elements are considered in planning phase including time schedule planning. Various elements are permit a more informal and flexible arrangement and extensive learning activity.