• 한국통신학회논문지
• /
• 제32권10A호
• /
• pp.1034-1041
• /
• 2007

본 논문에서는 고속 무선 통신을 위한 IEEE 802.15.TG3a PHY proposal 중에서 MBOK DS-UWB (M-ary bi-orthogonal keying direct sequence UWB) 시스템의 수신기를 위한 개선된 방식의 FD MMSE (frequency domain minimum mean square error) equalizer 알고리즘을 제안한다. 기존 FD MMSE equalizer 알고리즘에서는 모든 전송 패킷에 CP (cyclic prefix)를 삽입해야 하므로 일반적인 SC (single carrier) 시스템에 적용할 경우 구조적인 제한이 발생한다. 본 논문에서는 이러한 문제점을 해결하기 위해 CP를 사용하지 않는 FD MMSE equalizer 알고리즘을 제안하였으며, 보다 정확한 채널 추정 및 보상을 위하여 MAF (moving average filter) 및 moving FFT 기법을 사용하여 수신 성능의 안정성을 증대시킴으로써 실내 무선 채널 환경에 보다 적합하도록 설계하였다. IEEE 802.15.TG3a 무선 채널 모델 환경에서의 성능 평가를 수행하고 일반적인 FDE 및 TD (time domain) MMSE-RAKE 수신기와의 성능 비교를 통해, 제안한 FD MMSE equalizer 알고리즘의 우수성을 입증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.85-94
• /
• 1999

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'dynamic domain-dividing line' the concept of which is developed in this study. A conservative Chimera grid method with a dynamic domain-dividing line technique is applied and validated by solving the flowfield around circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver is also examined by computations of a oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.552-559
• /
• 2009

Most damage identification methods for structural health monitoring developed to date utilize modal domain responses which require postprocessing and inevitably contain errors in transforming the domain of responses. In this paper, the feasibility of a damage identification method based on dynamics responses from moving loads is experimentally verified. The experiment is performed via applying periodic and non-periodic moving loads to a steel beam and acceleration and displacement responses of the beam is measured. The moving loads is applied using steel balls and the damage of a structure is simulated by saw-cutting the beam. The damage identification results using the measured responses show that the moving load response based damage identification method successfully identify all damages in the beam.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.87-94
• /
• 2007

구조물의 동적해석은 크게 시간영역과 주파수영역해석으로 나눌 수 있다. 시간영역해석은 직접적분법과 모드중첩법 등을 사용하며 주파수영역해석은 DFT법을 적용하고 있다. 일반적으로 DFT법은 주기함수에 대한 응답을 산정할 경우 효과적인 해석방법이지만 비주기함수인 경우 정확한 해석결과를 얻을 수 없어 주기를 크게 하거나 응답을 수정하여 해의 정확성을 향상시키고 있다. 따라서 본 연구는 비주기함수인 이동하중을 받는 구조물에 대해 시간영역과 주파수영역에서 동적응답을 산정하였다. 그 결과 구조물의 자유진동주기를 크게 하거나 응답을 수정하여 DFT법을 적용한다면 주파수영역에서도 충분히 정확한 해석결과를 얻을 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.200-204
• /
• 2005

The use of beamforming method and de-Dopplerization technique was applied in studying the rotating sound sources. Acoustic analysis of a moving sound source required that the measured sound signals be do-Dopplerized and restored as of the original emission signals. Two main issues of the signal reconstruction in time domain are addressed herein: First, to remove Doppler effect from the measured data and to restore the original emission data of the moving source. The difference of the time domain beamforming from the frequency domain beamforming was mentioned. Also, the time domain beamforming method is deployed in the test and the comparisons were made to the frequency domain results. The time domain signal reconstruction was numerically simulated prior to the application. To validate the de-Dopplerization Performance, the rotating Point sources were examined and localized by the use of a phased array of microphone. The application of prop-rotor was conducted in a hovering condition. The results of reconstructing time signals of rotating sources and its locations were shown in the power distribution maps. In the prop-rotor measurements, the acoustic source locations were successfully verified in varying positions for different frequencies of interest.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.86-87
• /
• 2003

Unstructured grid system is suitable for flows of complex geometries. For problems with moving boundary walls, the grid system must be changed and deformed with time if we use a body fitted grid system. In this paper, a new moving-grid finite-volume method on unstructured grid system is proposed and developed for unsteady compressible flows with shock waves. To assure geometric conservation laws on moving grid system, a control volume on the space-time unified domain is adopted for estimating numerical flux. The method is described and applied for two-dimensional flows.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.263-274
• /
• 2018

In this study, we propose a frequency domain spectral element method (SEM) for the vibration analysis of a multi-span beam subjected to a moving point force. This study is an extension of the authors' previous study for a single-span beam subjected to a moving point force, where the two-element model-based SEM was applied. In this study, each span of a multi-span beam is represented by the Timoshenko beam model and the moving point force is transformed into the frequency domain as a series of each stationary point force distributed on the multi-span beam. The span at which a stationary point force is located is represented by two-element model, but all other spans are represented by one-element models. The vibration responses to a moving point force are obtained by superposing all individual vibration responses generated by each stationary point force. The high accuracy and computational efficiency of the proposed SEM are verified by comparing the solutions by SEM with exact analytical solutions by the integral transform method (ITM) as well as the solutions by the finite element method (FEM).

• 대한수학회논문집
• /
• 제34권2호
• /
• pp.565-572
• /
• 2019

In this paper, we consider a Korteweg-de Vries equation in noncylindrical domain. This work is devoted to prove existence and uniqueness of global solutions employing Faedo-Galerkin's approximation and transformation of the noncylindrical domain with moving boundary into cylindrical one. Moreover, we estimate the exponential decay of solutions in the asymptotically cylindrical domain.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권6호
• /
• pp.765-777
• /
• 2002

전장분석을 위해서는 대상이 되는 적 부대에 대한 식별 및 이동 상황에 관한 정확한 정보가 요구된다. 그러나 통신 기술, 전파 방해, 전술 등의 이유로 모든 정보를 완벽하게 수집하는 것은 어렵다. 따라서 이미 수집된 이동 정보 및 도메인 지식을 이용한 미래 이동 상황의 예측 및 분석이 필요하다. 특히, 이동하는 부대들은 시간에 따라 위치 및 모양이 변하는 이동 객체의 특성을 가지므로, 전장분석을 위해서는 이동 객체를 관리하고 위치를 예측하는 기능이 필수적이다. 따라서 이 논문에서는 전장분석을 위한 이동 부대들의 위치를 예측하는 시스템을 제안한다. 이 시스템은 전장분석 응용 도메인에 적합한 미상의 부대 추론, 미확인 부대 추론, 주타격 방향을 예측하며, 데이타베이스에 저장되지 않은 이동 객체의 과거 및 미래의 위치를 추정한다.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.115-123
• /
• 2017

Electrochemical noise signals in many cases exhibit a DC drift that should be removed prior to further data analysis. Polynomial fitting and moving average removal method have been used to remove trends of electrochemical noise (EN) in time domain. The corrosion inhibition of synthesized schiff base N,N'-bis(3,5-dihydroxyacetophenone)-2,2-dimethylpropandiimine on API-5L-X70 steel in hydrochloric acid solutions were used to study the effects of drifts removal methods on noise resistance calculation. Also, electrochemical impedance spectroscopy (EIS) was used to study the corrosion inhibition property of the inhibitor. The results showed that for the calculation of $R_n$, both methods were effective in trend removal and the polynomial with m=4 and MAR with p=40 were in agreement.