• 한국영어학회지:영어학
• /
• 제3권3호
• /
• pp.341-373
• /
• 2003

A cross-linguistic examination of motion constructions reveals that the nature of the special property of English motion verbs that Tenny (1995) discussed-namely, why English can freely append locational delimiters to manner-of-motion verbs, as in Bill swam/rowed/canoed to the end of the lake -resides not in the verbs but in the semantic structure of the prepositions that denote transition from motion to end location. It is further argued that the differentiation of bounded paths from non-bounded Ones provides a clear-cut basis on which to distinguish motion constructions from resultative constructions. This proposal provides an alternative to the analyses of resultative constructions by Wechsler (1997) and Rappaport Hovav and Levin (2001).

• 한국통신학회논문지
• /
• 제28권9C호
• /
• pp.868-875
• /
• 2003

본 논문에서는 웨이블릿 변환 영역에서 기존의 다중해상도 움직임 예측 방법에 비해 보다 향상된 단화소 이동 감쇠를 이용한 다중해상도 움직임 예측 방법을 제안하였다. 웨이블릿 변환 영역에서 웨이블릿 계수들의 계층적 상관관계를 이용한 기존의 다중해상도 움직임 예측 방법(MRME)은 웨이블릿 변환시 수행되는 다운 샘플링 과정에서 발생되는 웨이블릿 계수들의 이동-변환 성질(shift-variant property)에 의해 정확한 움직임 예측을 수행할 수 없다는 단점이 있다. 따라서 이러한 문제점을 극복하기 위해 제안된 방법은 입력 영상에 대해서 2레벨 웨이블릿 변환을 수행한 후 저대역 신호인 S$_4$대역에 대해 3레벨 웨이블릿 변환을 수행하기 앞서 S$_4$대역에서의 단화소 이동된 신호를 제거하기 위한 방법으로 보간을 적용한다. 보간된 저 대역 신호 S$_4$대역에 대해서 1레벨 웨이블릿 변환을 수행한 후 최종적으로 3레벨 웨이블릿 변환된 저 대역 신호 S$_{8}$대역에 대해서 초기 움직임 벡터를 구한 다음 나머지 하위 레벨에 위치한 대역에 대해서 기존 다중해상도 움직임 예측 방법과 동일한 방법으로 움직임 예측을 수행함으로써 향상된 부호화 성능을 얻을 수 있었다. 실험 결과 제안한 방법은 기존 다중해상도 움직임 예측 방법과 웨이블릿 변환 영역에서 전역 탐색 방법과 비교해 PSNR면에서 약 1∼2dB정도 향상된 부호화 효율을 나타낼 뿐 아니라, 주관적 화질에서도 개선된 결과를 보였다.

• 방송공학회논문지
• /
• 제16권2호
• /
• pp.293-304
• /
• 2011

본 논문에서는 H.264/AVC 인코더에서 가장 많은 연산 시간이 소요되는 움직임 추정(motion estimation, ME) 동작을 위한 하드웨어의 구조를 제안하고 IP(intellectual property) 형태로 구현하였다. 고속 움직임 추정기의 구조는 버퍼(buffer), PU 어레이(processing unit array), SAD 선택기(SAD selector), MV 생성기(motion vector generator) 등으로 구성되어 있다. PU 어레이는 16개의 PU로 구성되어 있고, 각각의 PU는 16개의 PE(processing element)로 이루어져 있다. 제안한 하드웨어의 동작적인 특징은 외부메모리 접근량을 줄이기 위해 현재와 참조프레임의 데이터를 재사용한다는 것과 SAD연산을 수행할 때 클록의 손실 없이 계산을 할 수 있다는 것이다. 구현한 고속 움직임 추정기는 Altera 사의 FPGA인 StatixIII EP3SE80F1152C2에서 3%의 자원을 사용하였고, 최대 동작주파수는 446.43MHz이었다. 따라서 구현한 하드웨어는 1080p 영상을 최대 50fps로 처리할 수 있다.

• 한국통신학회논문지
• /
• 제30권11C호
• /
• pp.1091-1097
• /
• 2005

본 논문에서는 H.264 동영상 표준 부호화 방식을 위한 고속 움직임 추정 기법을 제안한다. 제안된 고속 움직임 추정 기법은 움직임 벡터가 국부적으로 일정한 상관관계를 유지하고 있다는 특성을 이용하여 각 블록의 움직임 추정 시 부호화된 인접 블록의 움직임 벡터 값으로부터 주어진 탐색 영역 내에서 수평, 수직 방향 각각 독립적으로 불필요한 탐색 영역을 제거하여 축소된 비대칭 가변 크기 탐색 영역을 결정한다. 또한, 예측된 탐색 영역제약 조건을 이용하여 가변 단계 탐색 방식을 취하는 것을 특징으로 한다. 실험 결과를 통해 제안된 방식에 의해 움직임 추정 탐색 지점이 전영역 탐색 방식(Full Search)에 비해 평균 $98\%$ 이상 절감되었으며, PSNR과 비트율은 평균적으로 전영역 탐색 방식과 등일 수준인 것을 결과로부터 확인 할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.871-880
• /
• 2000

A twin-servo mechanism is used to increase the payload capacity and assembling speed of high precision motion control systems such as semiconductor chip mounters. In this paper, we focus on the modeling of the twin-servo system and propose its network representation. And also, we propose a robust synchronizing motion control algorithm to cancel out the skew motion of the twin-servo system caused by different dynamic characteristics of two driving systems and the vibration generated by high accelerating and decelerating motions. The proposed control algorithm consists of separate feedback motion control algorithms for each driving system and a skew motion compensation algorithm. A robust tracking controller based on internal-loop compensation is proposed as a separate motion controller and its disturbance attenuation property is shown. The skew motion compensation algorithm is also designed to maintain the synchronizing motion during high speed operation, and the stability of the whole closed loop system is proved based on passivity theory. Finally, experimental results are shown to illustrate control performance.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권1호
• /
• pp.25-30
• /
• 2010

This paper is proposed about three axis motion control camera design method based on wires. Original motion control camera consists of track, boom, L-Head, Camera and so on and is enormous and expensive. But proposed motion control camera adjusts wire length using encoders and motors. And position control use position based straight line of straight-line move method for moving precise position. Proposed simple design is able to use various place and inexpensive than original motion control camera. But, camera was vibrated and rotated due to basic property of wire. So we proposed solutions that connected method of wire and using a tensional object for reducing rotation. For proposed algorithm verification, we realized three axis motion control camera based on wire and measured oscillation while moving same trace. We confirmed the results that standard deviation of oscillation was reduced 4.93 degree than before design method.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.697-703
• /
• 2014

This paper is study of solving vibration problem occurred in moving hand of wafer transfer robot in semiconductor manufacturing line. Long settling time for decreasing vibration makes low production rate, and moreover the excessive vibration of hand sometimes breaks the wafer in a cassette. The ways of reducing the moving speed and changing the type of motion profile did not help for lessening vibration. Therefore, we analyzed the mechanical property of the hand such as natural frequency, and frequency component of the motion profile currently used in the manufacturing line. In several conditions of motion profile, we found the best condition of which the frequency component in near of natural frequency of the hand is minimal and this induced small vibration in moving hand. The results were verified theoretically and experimentally using frequency analysis.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.101-108
• /
• 1998

This paper concerns the navigation algorithm of motion reference unit (MRU) for autonomous underwater vehicle (AUV) We apply the strapdown navigation system using middle level inertial sensors. But, because the MRU consists of inertial sensors, the values of AUV motion calculated by navigation computer are increased by drift property of inertial sensors. Therefore, we propose the attitude algorithm using switching method according to the motion of AUV From this algorithm, the drift terms are eliminated effectively for roll and pitch. But, another device is required for yaw angle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.262-267
• /
• 2000

This paper describes a weight in motion(WIM) sensor to measure the weight of a vehicle in motion. The main sensing element of the WIM sensor is the PVDF(Polyvinylidene fluoride) film that shows rapid response to an external excitation. Due to the property of rapid response, it is possible to measure the weight of a vehicle in motion with high speed. In the development of the WIM sensor, the dominant target value was the uniformity of the sensor. To increase the uniformity, We employed shrinkable tube made of rubber to enhance the uniformity, and performed the rolling of the brass tube repeatedly. The uniformity of the sensor was examined experimentally. It was comparable to that of a WIM sensor of the MSI which was the benchmark of this development. This paper also describes the mechanical modeling of the sensor and the suitable charge amplifier for the sensor.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.751-757
• /
• 2007

The authors aim to establish the theory necessary for developing free gyro positioning system and focus on measuring the nadir angle by using the motion rate of a free gyro. The azimuth of a gyro vector from the North can be given by using the property of the free gyro. The motion rate of the spin axis in the gyro frame is transformed into the platform frame and again into the NED (north-east-down) navigation frame. The nadir angle of a gyro vector is obtained by using the North components of the motion rate of the spin axis in the NED frame. The component has to be transformed into the horizontal component of the gyro by using the azimuth of the gyro vector and then has to be integrated over the sampling interval.