• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.11-24
• /
• 2010

Lighting industry is rapidly being developed as the ubiquitous society based on sensor network emerges. This kind of paradigm shift brings the society convergence of technologies which leads to smart lighting system as well as the integration of interior and sensibility control. However, standards for sensors have not been firmly established, and problems related to quality and malfunction have been brought up, thereby calling for careful approach to the enhancement and assessment of reliability of the item. In this article reliability assessment criteria for sensor module for lighting fixtures is established in terms of performance assessment criterion and reliability assessment criterion.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.412-414
• /
• 1999

The FSK demodulation module is the circuit which detects the data being transmitted from reader by FSK method. It doesn't use the PLL, and has lower power consumption and easier integration than conventional FSK detector using the PLL. So in a smart card, it is suitable to apply. In this study, the FSK demodulation module of the low power smart card is designed and analyzed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.7 no.1
• /
• pp.19-29
• /
• 1999

This paper proposes a system intergration method for M20J flight simulator development. The simulator consists of three modules. The first module is for flight dynamics simulation, and the second module is for avionic systems and flight instrument and the last module is for interface card which connects PC and input devices using rotary encoders and switches. Two computers are equipped in the simulator for instructor and trainee. An instructor can give a mission to a trainee, and control the flight simulation options through RS-232C serial port. Also, the instructor can monitor the training results of the trainee.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.75-76
• /
• 2006

A new broadcasting standard for Digital Multimedia Broadcasting(DMB) has been announced in Korea to provide audio, video, and data broadcasting services. There exist two types of DMB; terrestrial DMB and satellite DMB. And in order to service DMB on the single system, the integration of RF module is required. In this paper, we describe an integrated RF tuner module that can receive T-DMB and S-DMB at the same time, which includes an L-band down-converter, a Band III tuner, and a S-DMB tuner.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.262-269
• /
• 2019

This paper introduces a low-cost, high-performance mmWave antenna array module at 77 GHz. Conventional waveguide transitions have been replaced by 3D CPW-microstrip transitions which are much simpler to realize. They are compatible with low-cost substrate fabrication processes, allowing easy integration of ICs in 3D multi-chip modules. An antenna array is designed and implemented using multilayer coupled-fed patch antenna technology. The proposed $16{\times}16$ array antenna has a fractional bandwidth of 8.4% (6.5 GHz) and a 23.6-dBi realized gain at 77 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.81-81
• /
• 2009

Non-sintered Alumina films were fabricated via inkjet printing processes without a high temperature sintering process. The packing density of these inkjet-printed alumina films measured around 60%. Polymer resin was infiltrated thru these non-sintered films in order to fill out the 40% of voids constituting the rest of the inkjet-printed films. The concept of inkjet-printed Alumina-Resin hybrid materials was designed in order to be applicable to the ceramic package substrates for 3D-system module integration which may possibly substitute LTCC-based 3D module integration. So, the dielectric properties of these inkjet-printed $Al_2O_3$ hybridmaterialsareofourgreatinterest. We have measured dielectric constant and dissipation factor of the inkjet-printed $Al_2O_3$-resinhybridfilmsbyvaryingtheamountofresininfiltratedthruthe$Al_2O_3$films.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.12-24
• /
• 2001

The key advantage of LTCC(low temperature co-fired ceramics) technology is the ability to integrate passive components such as resistors, capacitors, and inductors. More compact circuits with an increased scale of integration are needed with the development for advanced telecommunication system such as IMT-2000. LTCC technology can be obtained by removing these elements from the substrate surface to inside of ceramic body. And it can miniaturize the wireless phone through integration of planar patch antenna, duplexer, band pass filter, bias line, circuit of impedance matching and RF choke etc. Futhermore, with the multilayer chip process and its outstanding electrical material characteristics, LTCC is predestined for highly-integrated, cost effective wide band applications. This paper focuses on the general description of LTCC MCM technologies and the fabrication of the multilayer VCO module.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.488-493
• /
• 2006

Accurate river discharge is the most important factor in managing river basins and for successfully maintaining total maximum daily loads in Korea. It is not easy to measure the discharge directly in large rivers owing to physical and environmental constraints, even after investing much time and money. Recently, to overcome these historical drawbacks in river discharge measurement, we have developed the Automatic Discharge Acquisition & Management System (ADAMS) that scans the river cross-section and measures each cell $(1m{\times}1m)$ velocity using HADCP. The hardware system is composed of an HADCP sensor and winch, as well as a PC and software system for the discharge calculation module and hardware control module. It is controlled remotely via the internet and uses the velocity-depth integration method and the velocity-contour method for calculating river discharges. The characteristics of ADAMS are a ubiquitously accessible system, featuring real time automatic discharge measurement, remote control via the internet. The results using ADAMS at the Jindong stage site show less than 5% uncertainty and are 4 times more efficient than the ADCP & Q-boat system. This system can be used to measure any large river, river mouth or tributary river affected by backwater, all of which have a very difficult measuring real time discharge. The next generation of ADAMS will feature an upgrade to increase portability and GPS integration.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.303-312
• /
• 2009

Recently, requests for the accurate process planning using modeling and simulation technique are increasing in many engineering fields including shipbuilding industry. In this study, Combined DEVS(Discrete EVent System specification) and DTSS(Discrete Time System Specification) simulation kernel is developed, and an integration strategy of dynamics simulation module and graphics module is also implemented. To evaluate the efficiency and applicability of the simulation kernel and integration strategy, these are applied to the block erection simulation of offshore structures.

• The Journal of Information Systems
• /
• v.23 no.2
• /
• pp.49-66
• /
• 2014

In today's competitive business environment it is a necessary condition for a company to produce high-quality product for its survival and growth. That is the case in the auto-part industry as well where the international standards, ISO/TS 16949 certification, are required by customers to adopt mandatory. This study presents a successful implementation of quality management system(QMS) in a major auto-part manufacturer in Korea, utilizing SAP's QM(qualaity management) module and a mobile office system. The QMS brought the company "A" a variety of benefits such as real-time availability of product-inspection data, speedy decision-making, reduction in time required for defect-handling, ease of vertical integration of business partners in supply chain, and ease of business process standardization between headquarters and overseas subsidiaries. It is expected that the findings of this study can be used as a useful guideline for companies to consider implementing ERP-based quality management systems successfully.