• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.57-67
• /
• 1996

The formulation for hybrid-QUICK scheme of convective transport terms in finite-volume calculation procedure is presented. Source terms are modified to apply the hybrid-QUICK scheme. Test calculations are performed for wall-driven cavity flow at Re=$10_2$, $10_3$, and $10_4$. These include the evaluation of boundary conditions approximated by third-order finite difference scheme. The stable and converged solutions are obtained without unsteady terms in the momentum equations. The results using hybrid-QUICK scheme show no difference with those using hybrid scheme at low Re ($=10_2$) and are better at higher Re ($10_3$, and $10_4$).

• ETRI Journal
• /
• 제30권6호
• /
• pp.874-876
• /
• 2008

Ethernet ring protection is a new technology introduced in ITU-T Recommendation G.8032, which utilizes the generic Ethernet MAC functions. We introduce an alternative enhanced protection switching scheme to suppress penalty in the switching transient, in which the Ethernet MAC filtering database (FDB) is actively and directly modified by information disseminated from the nodes adjacent to failure. The modified FDB at all nodes are guaranteed to be consistent to form a complete new ring network topology immediately. This scheme can reduce the capacity requirement of the G.8032 by several times. This proposed scheme can be also applied in IP protection rings.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.100-107
• /
• 2009

이동 셀룰라 시스템에서 단말의 속도를 알아내는 것은 효율적인 시스템 운영을 위해 꼭 필요한 일이다. 그동안 여러 가지 이동체의 속도 추정 방안이 제안되어 왔는데, 이 논문에서는 적응형 어레이 안테나를 이용해 간단하게 속도를 추정하는 방안을 제안한다. 제안하는 방안은 이동체의 속도를 이동 거리 정보와 상주시간 정보를 이용해 추정한다. 이 방안은 추가적인 코스트 부담 없이 정확하게 속도를 추정할 수 있다. 제안하는 방안의 성능 분석을 위해 본 논문에서는 수학적 분석과 시뮬레이션을 수행하였고 그 결과 제안하는 방안이 만족할만한 성능을 보여주는 것을 알 수 있었다.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.242-250
• /
• 1999

This paper presents an estimation scheme of the external torque applied on the motor by using measured motor input current when the IPM(Interior Permanent Magnet) rotor type BLDC motor operates with constant speed. In general, the BLDC motor is controlled by vector control method. If it could be operated at over critical speed, the control scheme must be modified to flux-weakening control method. The external torque applied on the motor using flux-weakening control method could not be calculated by conventional torque equation because the demagnetizing current Id exists in the motor input current. In this paper, the commonly used flux-weakening control method is studied and the modified torque estimation scheme is suggested. The estimation scheme has been verified by the simulations and experimental results.

• 대한수학회보
• /
• 제54권2호
• /
• pp.647-654
• /
• 2017

Duality methods based on modified Lagrangian functional for solving a model crack problem is considered. Without additional assumptions of regularity of the solution of an initial problem duality ratio is established for initial and dual problem.

• Korean Journal of Mathematics
• /
• 제23권3호
• /
• pp.409-425
• /
• 2015

In this paper, a new iterative scheme based on the extra-gradient-like method for finding a common element of the set of fixed points of a finite family of nonexpansive mappings and the set of solutions of modified variational inequalities in Banach spaces. A strong convergence theorem for this iterative scheme in Banach spaces is established. Our results extend recent results announced by many others.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.256-259
• /
• 1999

A new PWM method for voltage source inverters is described. The switching instants determination of the proposed PWM scheme is simple. Therefore, hardware implementation with a microprocessor system is easy and high frequency operation of an inverter can be obtained. The maximum line-to-line output voltage of 3-phase inverter with the proposed scheme is larger than that of the SPWM inverter under a linear modulation region. Principle of the proposed PWM method is described and harmonic characteristic analysis is carried out.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.27-34
• /
• 2004

A tetrahedral mesh generation scheme using 3-D operators has been presented. The proposed scheme employs new 3-D operators such as rearranging and modified finishing operators in addition to the previous trimming, wedging, digging, splitting and finishing operators. These new operators have been introduced in order to increase the stability of mesh generation process. Check processings with surrounded element edges and faces have also been optimized by employing a searching algorithm. Sample meshes are constructed to demonstrate the mesh generating capability of the proposed algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1905-1908
• /
• 2002

In this paper, we analyze the natural processing delay of OFDM systems and proposed two modified unctional blocks to decrease about 25% of the total delay. e evaluate BER performance of the proposed scheme to e compared with that of classical one to confirm same performance between them.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1273-1278
• /
• 2012

본 논문에서는 무손실 영상 압축에서 쓰이는 변형된 정수 변환들을 설명하고 이를 2차원으로 확장한 것에 대한 성능 분석을 제시한다. 변형된 정수 변환들은 2차원으로 확장하는 방법에 따라서 그 성능 및 복잡도가 다른 면이 있다. 따라서 본 논문에서는 분리 가능한 형태로 확장한 변형 H.264 정수 변환 및 리프팅 구조를 이용한 가역 정수 변환과 분리 가능하지 않은 형태로 확장한 JPEG XR의 PCT변환에 대한 성능 및 복잡도를 비교 분석하여 제시하고, 이에 관련된 실험 결과를 제공한다. 실험 결과는 리프팅 구조를 이용하여 변형된 가역 정수 변환을 분리 가능한 형태로 확장하는 방법이 압축 효율면에서 가장 우수함을 보여준다.