• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.58-64
• /
• 2008

The cutting process of materials is accompanied with the elastic and plastic deformation due to chucking forces in the boring process of thin holes on the turning. Upon removal of chucking forces at the end of process, the original shape is remained in the plastic deformation; on the other hand, it is modified in the elastic deformation due to spring back. Fixing materials by chucks on the turning has influence on roundness because the process is conducted with unbalanced distribution load induced from the fixing of three jaws. Moreover, the amount of spring back depends on the magnitude of fixing forces. We studied the change of roundness according to fixing forces as well as the method to reduce the influence of chucking forces.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.590-598
• /
• 2011

Bacterial assimilation of $CO_2$ into stable biomolecules using electrochemical reducing power may be an effective method to reduce atmospheric $CO_2$ without fossil fuel combustion. For the enrichment of the $CO_2$-fixing bacteria using electrochemical reducing power as an energy source, a cylinder-type electrochemical bioreactor with a built-in anode compartment was developed. A graphite felt cathode modified with neutral red (NR-graphite cathode) was used as a solid electron mediator to induce bacterial cells to fix $CO_2$ using electrochemical reducing power. Bacterial $CO_2$ consumption was calculated based on the variation in the ratio of $CO_2$ to $N_2$ in the gas reservoir. $CO_2$ consumed by the bacteria grown in the electrochemical bioreactor (2,000 ml) reached a maximum of approximately 1,500 ml per week. Time-coursed variations in the bacterial community grown with the electrochemical reducing power and $CO_2$ in the mineral-based medium were analyzed via temperature gradient gel electrophoresis (TGGE) of the 16S rDNA variable region. Some of the bacterial community constituents noted at the initial time disappeared completely, but some of them observed as DNA signs at the initial time were clearly enriched in the electrochemical bioreactor during 24 weeks of incubation. Finally, Alcaligenes sp. and Achromobacter sp., which are capable of autotrophically fixing $CO_2$, were enriched to major constituents of the bacterial community in the electrochemical bioreactor.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.3
• /
• pp.168-172
• /
• 2007

Objective : Hirabayashi's open-door laminoplasty is a good procedure to use to treat patients with myelopathy of the cervical spine; however, the authors have experienced problems in maintaining an open-window in cervical spines after the surgery. The authors developed a modified method of the expanded open-door laminoplasty and compared the radiological and clinical results with those of the classical method. Methods : In the modified method, wiring fixation with lateral mass screws on the contra lateral-side instead of fixing the paraspinal muscle or facet joint, as in the classical methods, was used in the open window of the cervical spine. Fifteen patients with cervical myelopathy were treated using the classical method and 12 patients were treated using the modified method. Preoperative and postoperative clinical conditions were assessed according to the Japanese Orthopedic Association (JOA) score. The radiological results were compared with the preoperative and postoperative computed tomography (CT) findings. Results : In both methods, the clinical results revealed a significant improvement in neurological function (p<0.001). Image analysis revealed that the cervical canals were continuously expanded in patients treated using the modified methods. However, authors have observed restenosis during the follow-up periods in 4 patients treated using the original method. Progression to deformity and spinal instability were not observed in any of the patients in the radiological results. Conclusion : Although analysis with a larger population and a longer follow-up period needs to be undertaken, our modified open-door laminoplasty has shown an advantage in better maintaining an open window in comparison with the Hirabayashi's open-door laminoplasty.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.59-74
• /
• 2009

Relative navigation system is presented using GPS measurements from a single-channel global positioning system (GPS) simulator. The objective of this study is to provide the real-time inter-satellite relative positions as well as absolute positions for two formation flying satellites in low earth orbit. To improve the navigation performance, the absolute states are estimated using ion-free GRAPHIC (group and phase ionospheric correction) pseudo-ranges and the relative states are determined using double differential carrier-phase data and singled-differential C/A code data based on the extended Kalman filter and the unscented Kalman filter. Furthermore, pseudo-relative dynamic model and modified relative measurement model are developed. This modified EKF method prevents non-linearity of the measurement model from degrading precision by applying linearization about absolute navigation solutions not about the priori estimates. The LAMBDA method also has been used to improve the relative navigation performance by fixing ambiguities to integers for precise relative navigation. The software-based simulation has been performed and the steady state accuracies of 1 m and 6 mm ($1{\sigma}$ of 3-dimensional difference errors) are achieved for the absolute and relative navigation using EKF for a short baseline leader/follower formation. In addition, the navigation performances are compared for the EKF and the UKF for 10 hours simulation, and relative position errors are mm-level for the two filters showing the similar trends.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.451-462
• /
• 1996

In this study, which focuses on ice storage, a fundamental study in cooling and solidification was performed, including the interesting phenomena of density inversion, supercooling and dendritic ice. A numerical study was performed for natural convection and ice formation considering existence of subcooling and dendritic ice were analyzed numerically by using finite difference method and boundary fixing method. In the mesh, the solid fraction was introduced with adding as a term to the energy conservation equation. A flow in the dendrite was modelled as a flow in a porous medium, and the momentum conservation equation was modified to incorporate resistance forces involved in flows through porous media. A numerical solution of the time dependencies of dendrite area and dense ice front was successfully obtained, and the numerical results were good agreement with experimental results. Based on this methodology, a discussion was made of phenomena and characteristics of cooling and freezing processes under various conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.185-190
• /
• 2005

Safe, economical and environment-friendly tunnel construction are required again along with social continuous development, the importance of waterproof work that is portion that actually all of user and builder can find that is embossed by tunnel construction's one of important construction. Also, ECB (Ethylen Copolymer Bitumen) sheet that is used in existing tunnel waterproofing method (ECB waterproofing method) being black because asphalt (Bitumen) is added, by purpose that make illumination of tunnel interior brightly and scar discovery eases in sheet with coating white film, but ECB that is used present according as ECB that asphalt is added does not satisfy high tensile strength of construction field, quality standard of extension. Also ECB denigrates color of black M/B that asphalt is excepted.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.477-479
• /
• 1998

This paper presents the results of the field of an improved GPS navigation algorithm. The improved GPS navigation algorithm is a modified Kalman filter which is designed to be ideally suited to car navigation in urban area where lack of GPS visibility is the major problem because of the frequent blockage of the GPS signals by tall buildings and other structures. The method allows the user to estimate its position when the number of visible GPS satellites becomes less than four by using altitude fixing and clock bias estimation techniques. The two estimation techniques are integrated with the Kalman filter in a mutually compensating manner and it is shown that the 3-dimensional position accuracy is well maintained when the number of the visible satellites drops down to two for a reasonable period of time. The post processing results are included to show the improved performance of the modified algorithm over a normal conventional GPS Kalman filter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.133-141
• /
• 1991

The empirical method is used to integration adjustment for the coordinates revision of a national control point but the existing values are not to be changed or changed with small variation by suitable datum selection (for example, fixed points). This paper treats the modified weighted station parameter adjustment by quasi-observations, and the method used only variance elements of existing coordinates which is substituted for all covariance elements. The movement detection of unstable points and the junction adjustment of new networks are successfully executed by the method, in integration of new secondary networks to old-secondary-triangulation points which are in the absence of the original observations in Korea. The investigation results reveal that the accuracy of old-secondary-triangulation points is ${\pm}16^{{\prime}{\prime}}$(${\pm}0.08m$), which results from the densification of test network and the analyses of old survey specifications. and is ${\pm}2.3^{{\prime}{\prime}}$ in fixing of old-secondary-triangulation points.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.323-328
• /
• 2010

If a patient wearing arm sliding due to shoulder dislocation or fracture is impossible with abduction, the velpeau view is performed instead of superior-inferior axial projection view. However, it aggravates the patient's pain because it is difficult for the patient with dislocation or fracture to pull back the shoulders. Therefore, I suggest a new method of the 'modified velpeau view' that allows patients to lower their heads at examination. In order to investigate the easiness of fixing posture at examination and clinical utility, I conducted a study comparing the bone structures at the velpeau view and those at the modified velpeau view depending on wall-bucky and the patients' leaning forward angle ($30^{\circ},\;45^{\circ},\;60^{\circ}\;and\;75^{\circ}$), with the subjects of 20 velpeau view-prescribed patients amongst who had come to my hospital suspected of dislocation of shoulder or fracture and 30 healthy people from October of 2009 to January of 2010. Department of radiologists and orthopedics specialists evaluated the pictures for scales 0 to 5(best grade) under the given criteria. As a result of comparison in bone structures depending on wall-bucky and the leaning-forward angle in the group of healthy people, the velpeau view and the modified velpeau showed a similar diagnostic utility at $45^{\circ}$ and $60^{\circ}$. The picture evaluation result for proving diagnostic value showed that the anterior and posterior of shoulder heads and the anterior and posterior of glenoid fossa could be observed in the velpeau view; on the other hand, besides these areas acromioclavicular joint and coracoid process could be viewed in the modified velpeau view. This result verified that the modified velpeau view could replace the velpeau view for its diagnostic value as an examination method. This result, moreover, suggests that the modified velpeau view needs to be studied and improved from a variety of perspectives not only for an alternative for patients having troubles with the velpeau view position but also for clinical application of new test method for diagnosis of shoulder disorders other than dislocation of shoulder or fracture.

• Composites Research
• /
• v.37 no.3
• /
• pp.238-245
• /
• 2024

In this study, as part of the development of a monitoring system for the efficient maintenance of steel pipes, an experimental study was conducted to evaluate the performance of steel pipes treated with modified polyethylene coating. In the case of the conventional mechanical pre-coating method, there was a deterioration in polyethylene adhesion during expansion testing, which led to the application of a chemical pre-treatment process using a calcium-mixed phosphate zinc film to resolve this issue. SEM and EDX analyses showed that the densest structure was observed at a Zn/Ca ratio of 1.0, and improved heat resistance compared to the conventional method was confirmed. Additionally, to prevent coating detachment during expansion, an evaluation of adhesion and elongation was conducted on steel pipes with modified polyethylene coating, incorporating materials such as elastomers based on maleic anhydride grafting, metal oxides, blocking agents, and slip agents. Experimental results showed that the specimen (S4) containing all modified materials exhibited more than a 25% performance improvement compared to the specimen (S2) containing only metal oxides. Lastly, the development and performance evaluation of wedge-shaped socketing and pressing wheels, which are part of the pipe fixing accessories, were conducted to prevent surface coating damage on the completed pipes.