• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.122-132
• /
• 1999

This study describes a dynamic model of the hydroforming process which is used for precision forming of sheet metals. To help the controller design for the control of the forming pressure needed for this process as well as to investigate the effect of system parameters on the dynamic behavior, dynamic modeling is performed with emphasis on hydraulic servo system which actuates the forming machine. Since the model contains several unknown parameters, these were estimated via a least square parameter identification method. Based upon the identified model, a series of simulations were performed for various operating conditions. The results were compared with those of the experiments to verify the validity of the proposed model. The comparison study shows that the proposed dynamic model can describe dynamic behavior of the forming pressure of the hydroforming process to desirable accuracy.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.204-214
• /
• 2016

Shipbuilding process takes a long time for producing final products, and needs many different resources. Because of these characteristics, it has been studied about shipyard simulation and virtual manufacturing that is able to implement the virtual manufacturing process. However, among the previous researches, it requires considerable time and effort to construct simulation model since the systematic methodology has not been used for simulation modeling. Also, reusability of constructed simulation model was low. Therefore, this research defines the method to construct shipyard simulation system using the process-centric simulation modeling methodology and shipyard simulation framework. This paper also validates the utility of this methodology through applying to construct simulation model for the shipyard master plan validation.

• 한국IT서비스학회지
• /
• 제11권sup호
• /
• pp.51-60
• /
• 2012

In this paper, we provide the analysis of device model and method between device models for compatible M&S V&V of the NetSPIN. First of all, we analysis features, structure, and classification of the NetSPIN. The second, as a part of reliable V&V process, we analysis network system modeling process, correlation between device modeling process for M&S of the NetSPIN. The third, we suggest making a kind of pool of reference model and module of devices for the increase factor of reuse between device model. We also, at the point view of M&S V&V, conclude that there is the validity of the fidelity in device modeling process. Through the analysis of the NetSPIN device model and suggestion of the method for higher compatibility between device modes, the development process of device model be clearly understood. Also we present the effective method of the development for reliable device mode as the point of V&V.

• 한국건축시공학회지
• /
• 제22권2호
• /
• pp.195-205
• /
• 2022

본 연구에서는 BIM(building information modeling)을 활용한 비용 기반 MEP(mechanical, electrical, and plumbing) 조율 프로세스를 제안하였다. 제안된 프로세스는 MEP 부재간 간섭 해결뿐만 아니라 MEP 조율 과정에서 의사결정에 따른 MEP 관련 비용 변화를 정확하고, 빠르게 분석하고, 참여자와 공유할 수 있도록 해준다. 이를 위하여 MEP BIM 모델로부터 추출된 물량 정보와 비용 데이터베이스, 시간 정보를 통합했다. 제안된 프로세스의 적용성을 평가하기 위하여 국내 건설 프로젝트 현장에 적용하였다. 적용 결과, 예상 비용 대비 약 1.6%의 MEP 관련 비용을 절감했다고 분석되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.237-238
• /
• 2012

As a way to improve productivity and integrated project delivery in construction industry, BIM(building Information Modeling) using IT technique is being studied and applied recently. S-BIM application Process was established that enable efficient work through Structural BIM detailed Model in consideration of the collaboration among relevant fields. This study has the objective applying S-BIM technique to enable effective Cost Analysis in initial design phase and presenting the method for practical works using Construction Cost Analysis Process based on S-BIM.

• 소성∙가공
• /
• 제16권2호
• /
• pp.107-112
• /
• 2007

In this study, the mechanical joining process for double sheet metals was investigated by using physical modeling method. Process parameters of mechanical joining such as friction coefficient, drawing depth, pouch radius, die radius and material thickness are preliminarily analyzed by finite element method. Referring to the finite element analysis results mechanical joining system is designed on the basis of physical similarities. From the physical modeling test, the effect of process parameters on the deformation for the mechanical joining are experimentally investigated and optimized joining shape that can provide strong joining strength is obtained.

• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.322-330
• /
• 1994

고도지능망의 개념모델에서는 총괄기능평면에서 다양한 지능망서비스 제공을 위하여 서비스에 독립적인 기능블럭인 SIB(service indenpendent building block)을 정의하고 있다. 본 논문은 이중에서 가장 근간이 되는 기본호처리 SIB를 위한 지능망교환기(SSP: service switching point)와 서비스제어시스템(SCP: service control point) 간의 프로토콜 모델링에 대하여 기술하였다. 모델링을 위하여 Petri Net를 이용하며, 도달성 트리(reachability tree)를 분석하여 모델에 대한 검증을 한다. 본 논문의 결과는 고도지능망 기본호처리 SIB 설계와 구현을 위하여 이용될 수 있을 것이다.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.40-47
• /
• 2005

Modeling and simulation for simultaneous saccharification and fermentation (SSF) process in bioconversion of paper mill sludge to lactic acid was carried out. The SSF process combined the enzymatic hydrolysis of paper mill sludge into glucose and the fermentation of glucose into lactic acid in one reactor. A mathematical modeling for cellulose hydrolysis was developed, based on the proposed mechanism of cellulase adsorption deactivation. Another model for simple lactic acid fermentation was also made. A whole mathematical model for SSF was developed by combining the above two models for cellulose hydrolysis and lactic acid fermentation. The characteristics of the SSF process were investigated using the mathematical model.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.803-808
• /
• 2018

Combining digital automation solutions throughout recent manufacturing process is essential. Advanced robot and mechanical techniques are required for design, manufacture, and distribution process. Manual design of repetitive similar mechanical components during the development phase of these advanced machines and robots can occur wasting time and money. Developed gear design module, which is the power transfer system mechanical component, was programmed in the Visual Basic language in CATIA V5 environment. Automation Process is Based on Parametric Modeling Method. and it was found to be effective in reducing design time compared to designers manual modeling.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.220-232
• /
• 2007

Current geometric modeling and analysis are commonly based on B-Rep modeling and a finite elements method respectively. Furthermore, it is difficult to represent an object whose material property is heterogeneous using the B-Rep method because the B-Rep is basically used for homogeneous models. In addition, meshes are required to analyze a property of a model when the finite elements method is applied. However, the process of generating meshes from B-Rep is cumbersome and sometimes difficult especially when the model is deformed as time goes by because the topology of deforming meshes are changed. To overcome those problems in modeling and analysis including homogeneous and heterogeneous materials, we suggest a unified modeling and analysis method based on implicit representation of the model using R-function which is suggested by Rvachev. For implicit modeling of an object a distance field is approximated and blended for a complex object. Using the implicit function mesh-free analysis is possible where meshes are not necessary. Generally mesh-free analysis requires heavy computational cost compared to a finite elements method. To improve the computing time of function evaluation, we utilize GPU programming. Finally, we give an example of a simple pipe design problem and show modeling and analysis process using our unified modeling and analysis method.