• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.227-232
• /
• 2006

In this paper, we propose a systematic method for intelligent digital redesign of a fuzzy-model-based controller for continuous-time nonlinear system which may also contain system uncertainties. The continuous-time uncertain TS fuzzy model is first contructed to represent the uncertain nonlinear system. A parallel distributed compensation(PDC) technique is then used to design a fuzzy-model-based controller for both stabilization. The designed continuous-time controller is then converted to an equivalent discrete-time controller by using a globally intelligent digital redesign method. This new technique is designed by a global matching of state variables between analog control system and digital control system. This new design technique provides a systematic and effective framework for integration of the fuzzy-model-based control theory and the advanced digital redesign technique for nonlinear systems with uncertainties. Finally, Chaotic Lorenz system is used as an illustrative example to show the effectiveness and the feasibility of the developed design method.

• 정보처리학회논문지D
• /
• 제16D권6호
• /
• pp.881-888
• /
• 2009

본 연구에서는 소프트웨어 기반으로 물품관리를 하기 위한 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 제안한다. 물품을 인력이 아닌 소프트웨어로 관리하기 위하여 여러 아키텍처들이 존재한다. MVC와 기존 아키텍처의 경우, 공통된 객체의 전달로 불필요한 데이터가 이동되는 문제점이 발생한다. 따라서 이와 같은 문제점을 해결하기 위하여 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 제시하고자 한다. VMDC(View, Model, Dispatcher, Controller) 아키텍처의 Dispatcher(사령부)는 각 Controller(컨트롤러)가 필요로 하는 데이터를 파악하고 그것을 기반으로 하여 객체를 재구성함으로서 효율적인 데이터 이동을 하도록 한다. 또한 VMDC(View, Model, Dispatcher, Controller) 아키텍처를 이용하여 개발된 식품관리 프로그램으로 사용사례를 보이고, 효율성을 제시 후 향후 연구방향 또한 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.15-17
• /
• 2001

This paper deals with a design problem of a switching-type fuzzy-model-based controller for a nonlinear system. Takagi-Sugeno(TS) fuzzy model and duffing forced-oscillation system are employed in designing the switching-type fuzzy controller. Finally, we analyze the stability of the global system controlled by the proposed controller.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.644-649
• /
• 2006

In this paper, a methodology for estimating the model parameters of a discrete-time system and tuning a digital PID controller based on the estimated model and a genetic algorithm is presented. To deal with optimization problems regarding parameter estimation and controller tuning, pseudo-parallel genetic algorithms(PPGAs) are used. The parameters of a discrete-time system are estimated using both the model adjustment technique and a PPGA. The digital PID controller is described by the pulse transfer function and then its three gains are tuned based on both the model reference technique and another PPGA. A set of experimental works on two processes are carried out to illustrate the performance of the proposed method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권3호
• /
• pp.220-226
• /
• 2002

In this paper, we develop the intelligent digitally redesigned fuzzy controller for nonlinear systems. Takagi-Sugeno (TS) fuzzy model is used to model the nonlinear systems and a continuous-time fuzzy-model-based controller is designed based on the extended parallel-distributed-compensation(EPDC) method . The digital controllers are determined from existing analogue controllers. The proposed method provides an accurate and effective method for digital control of continuous-time nonlinear systems and enables us to efficiently implement a digital controller via the pre-determined continuous-time 75 fuzzy-model-based controller. We have applied the proposed method to the duffing forced oscillation system to show the effectiveness and feasibility of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1086-1087
• /
• 2007

This paper presents a implementation of speed sensorless vector control algorithm of induction motor using MATLAB/SIMULINK. The proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. Estimated rotor speed, which is used to speed controller of induction motor, is based on estimated flux. The overall system consisted of speed controller with the most general PI controller, current controller, flux controller. Speed sensorless vector control algorithm is implemeted as block diagrams using MATLAB/SIMULINK. Realtime control is perform by dSPACE DS1104 control board and Real-Time-Interface(RTI).

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.15-24
• /
• 1997

The design and evaluation of a digital U-tube steam generator level controller of nuclear power plants, which uses model-based compensators to offset the inverse response behavior of water level, is described. Included is a review of steam generator level dynamics, a simulation model that replicates the effects of feedwater and steam flowrate as well as temperature on steam generator level, the design of both the compensators and the overall controller, and the results of simulation studies in which the performances of this model-based controller and existing analog ones were compared. The proposed digital steam generator level controller is stable and its use significantly improves the controllability of steam generator level.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.145-147
• /
• 2007

This paper presents an implementation of vector control for SMPMSM using model based controller design in MATLAB/SIMULINK. The model based controller design enables fast development of control system for motor by designing controllers and performing simulation on the GUI (Graphic User Interface) platform, converting program code directly into real-time programs, and then performing tests for the responses from controllers. The controller is designed as PI controller for speed and decoupling PI controller for current. And PWM used space vector modulation method using offset voltage and system stability is also secured by close magnitude overmodulation method, maintaining dynamics of load when it overmodulation. The validity of vector control implemented is verified through simulations and experiments.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.41-47
• /
• 2023

This paper presents the development of a controller that can control the temperature of an heating system based on a thermoelectric module. Temperature controller using Peltier has various external factors such as external temperature, characteristics of an aluminum plate, installation location of temperature sensors, and combination method between the aluminum plate and heating element. Therefore, it is difficult to apply the simulation and simulation results of heating system using Peltier at control algorithm. In general, almost temperature controller is using PID algorithm that finds control gain value heuristically. In this paper, it is proposed mathematical model that explain correlate between the temperature of the heating system and input voltage. And then, optimal parameter of estimated thermal model of the aluminum plate are searched by using genetic algorithm. In addition, based on this estimated model, the optimal PID control gain are inferred using a genetic algorithm. All of the sequence are simulated and verified with proposed real system.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2427-2433
• /
• 2015

This paper presents an observer-based robust controller for constant reference tracking of linear time invariant systems with polytopic model uncertainties. To this end, this paper not only designs a robust integral controller gain but also suggests how to determine the robust observer gain and the observer model used in the observer. Since the observer model selection is not obvious due to the polytopic uncertainties, particular attention needs to be paid to that. This paper computes the robust controller and observer gains first. Then, the observer model is selected in a way that the whole closedloop is stable and LMIs are used in the middle of choosing the gains and observer model. Simulation examples show that the proposed observer-based feedback control successfully achieves robust reference tracking.