• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.725-730
• /
• 1998

Recently we extended the fuzzy model for rule based systems incorporating an importance factor for each rule. The model permits for both unrestricted as well as non-negative importance factors. We use this extended model to design a fuzzy rule based classifier system which uses both the firing strength of the rule and the importance factor to decide the class label. The effectiveness of the scheme is established using several data sets.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.566-569
• /
• 2009

In this paper, we propose a less conservative a linear matrix inequality (LMI) condition for the constrained robust model predictive control of systems with input constraints and polytopic uncertainty. Systems with input constraints are represented as perturbed systems with sector bounded conditions. For the infinite horizon control, closed-loop stability conditions are obtained by using a parameter dependent Lyapunov function. The effectiveness of the proposed method is shown by an example.

• 산업공학
• /
• 제11권3호
• /
• pp.227-240
• /
• 1998

This article presents a model for Intelligent Groupware Systems(IGS). The model is concerned not just with a future framework, but attempts to integrate many technologies into the framework. In order to do so, first of all it identifies essential technologies to improve the performance of the components in the model in terms of task-independent technologies(TIT) and task-dependent technologies(TDT). The former mainly consists of current technologies, which is under progress, being able to affect the groupware performance greatly. On the other hand, the latter is closely related to the knowledge depending on application systems. Fianlly, it presents these potential technologies which will be required for the IGS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.212-217
• /
• 1992

In this paper, a two ports machine(TPM) model for discrete event dynamic systems(DEDS) is proposed. The proposed model is a finite state machine which has two inputs and two outputs. Inputs and outputs have two components, events and informations. TPM is different from other state machine models, since TPM has symmetric input and output. This symmetry enables the block diagram representation of the DEDS with TPM blocks, summing points, multiplying points, branch points, and connections. The graphical representation of DEDS is analogous to that of control system theory. TPM has a matrix representation of its transition and information map. This matrix representation simplifies the analysis of the DEDS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.203-208
• /
• 1987

Design problem of output feedback controllers for discrete large scale systems using simplified model is investigated. It is shown that neglecting fast modes does not generally guarantee the stability of the closed loop system. In this paper, the design procedure is proposed to stabilize the system by minimizing a quadratic cost function for the simplified model and a measure of stability for the neglected fast model.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.208-211
• /
• 2007

In a recently proposed method of model reduction for discrete interval systems, the denominator polynomial of a reduced model is computed by applying interval arithmetic to dominant poles of the original system. However, the denominator polynomial obtained via interval arithmetic usually has poles with larger intervals than desired ones. Hence an unstable polynomial can be derived from the stable polynomial. In this paper a simple technique is presented to partially overcome such a stability problem by accurately preserving desired real dominant poles.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2000년도 추계공동학술대회논문집
• /
• pp.425-429
• /
• 2000

데이터 모델링 접근은 주로 순 공학을 사용하여 미래의 필요구조에 초점을 맞추고 있기 때문에 새로운 데이터베이스를 설계하기 위해서는 많은 시간과 노력, 개발비가 필요하다. 그러나 기존의 데이터베이스를 재사용 한다면 개발에 필요한 시간과 노력, 개발비를 줄일 수 있을 뿐 아니라 자료의 재활용면에서 효율적이다. 본 논문에서는 사용 가능한 데이터베이스 application을 재사용하기 위해 Form model을 이용하여 새로운 데이터베이스 설계의 바탕이 되는 개체-관계 스키마를 추출하는 방법에 대해 연구하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1114-1117
• /
• 1993

The paper presents an effective method for finding the propagation structure of the real origin of a system malfunction. It uses a combined system model consisting of Structural Model (SM) in the form of Fuzzy Directed Graph and Behavior Model (BM) as a set of Fuzzy Relational Equations $A\;{\circ}\;R\;=\;B$. Here a specially proposed fuzzy inference technique is checked and investigated. Finally a test example for fault diagnosis of an industrial system is given and analyzed.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.45-52
• /
• 2008

Daylighting systems can improve the luminous quality of indoor environment and reduce the building's electric lighting energy consumption. For designing good daylighting, place the light where it is desired and avoid excessive contrasts, glare and high light levels. Sun scoop, light scoop and sun catcher systems have been used for alternative systems compared to other natural lighting systems. This study aims to evaluate daylighting performance of sun scoop, light scoop and sun catcher systems using scale model experiments. For the purpose, the 1/10 scale models of the systems were made as the same areas of glazing(10 percent of floor area) on the top of the center roof. Totally 15 measuring points of illuminance on the horizontal work plane were monitored from 09:30 to 12:30 on October 29, 2007. Agilent data logger and photometric sensors Li-cor were used. As the results, the topside lighting systems can improve the illumination uniformity than side lighting and top lighting. However, the appropriated shading system should be integrated to prevent the direct sunlight.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.133-149
• /
• 1996

In order to reduce the trial-and-errors in design and production of injection molded plastic parts, there has been much research effort not only on CAE systems which simulate the injection molding process, but also on CAD systems which support initial design and re-design of plastic parts and their molds. The CAD systems and CAE systems have been developed independently with being built on different basis. That is, CAD systems manipulate the part shapes and the design features in a complete solid model, while CAE systems work on shell meshes generated on the abstract sheet model or medial surface of the part. Therefore, it is required to support the two types of geometric models and feature information in one environment to integrate CAD and CAE systems for accelerating the design speed. A feature-based non-manifold geometric modeling system has been developed to provide an integrated environment for design and analysis of injection molding products. In this system, the geometric models for CAD and CAE systems are represented by a non-manifold boundary representation and they are merged into a single geometric model. The suitable form of geometric model for any application can be extracted from this model. In addition, the feature deletion and interaction problem of the feature-based design system has been solved clearly by introducing the non-manifold Boolean operation based on 'merge and selection' algorithm. The sheet modeling capabilities were also developed for easy modeling of thin plastic parts.