• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.320-334
• /
• 1996

Dental cast and die materials are essential material using in almost dental prsthodontic procedure and it's most important requirement is accuracy for reqorducing the oral anatomical structures. In this study, 5 abutments A, B, C, D, E were fabricated on the metal master model to simulate the arch form and specimens were poured with 4 cast materials. Inter-abutment distances, A-B, A-C, A-D, A-E, B-C, B-D were calculated using the photo-scanning and the deviations from the metal master model were also evaluated. The results were as follows; 1. The distance between A-B, A-C, A-D, A-E, B-C, B-D of the abutments A, B, C, D, E of each cast material was calculated. And after comparing the deviations between the metal master model. $Fujirock^{(R)}$ showed the lowest value with $0.20{\pm}0.22mm$, and the deviation increased in the order of $Suprastone^{(R)}$, Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. 2. In each calculation area, the difference in measurements between cast material and metal master model showed singificant difference between A-B and Cross arch measure-ments of A-D, B-D, A-E(p<0.05). 3. The difference in measurements between cast material and metal master model in the A-B area showed $Fujirock^{(R)}$ to be the lowest with $0.05{\pm}0.04$mm and increased in the order of Die $Keen^{(R)}$, $Suprastone^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and $Suprastone^{(R)}$, Epoxy $Die^{(R)}$ (p<0.05). 4. The difference in measurements between cast material and metal master model in the B-C area showed $Fujirock^{(R)}$ to bo the lowest with $0.17{\pm}0.11$mm and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Die $Keen^{(R)}$, Epoxy $Die^{(R)}$(p<0.05). 5. The difference in measurements between cast material and metal master model in the B-D area showed $Fujirock^{(R)}$ to bo the lowest with $0.13{\pm}0.07$mm, Epoxy $Dies^{(R)}$and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fuji-rock^{(R)}$ and Die Keen(p<0.05). 6. In this experiment, Epoxy $Dies^{(R)}$ showed mean contraction in every calculation area. And when reconstruction cross arch restorations it is thought that distortion should be considered in every cast material.

• Environmental Mutagens and Carcinogens
• /
• v.21 no.1
• /
• pp.44-50
• /
• 2001

To identify nongenotoxic carcinogen determined as negative by ICH guideline-recommended standard genotoxicity test battery; Ames test, chromosome aberration assay, mouse lymphoma $tk^{+/-}$ assay, in vivo micronucleus assay, we picked bisphenol A as a model compound. In this study, we applied in vitro BalB/c 3T3 cell transformation assay and Syrian hamster embryo (SHE) cell transfarmation assay. Bisphenol A was treated upto $769.2 ug/m{\ell}$ in BalB/c 3T3 cells and upto $125 ug/m{\ell}$ in SHE cells. bisphenol A didn't induced morphological transformation both with one stage treatment protocol and with two stage treatment protocol. But, treated far 48 hr, Bisphenol A induced morphological transformation significantly in SHE cells.

• IMMUNE NETWORK
• /
• v.5 no.2
• /
• pp.68-77
• /
• 2005

Background: Costimulation is a critical process in Ag-specific immune responses. Both B7.1 and CD28 molecules have been reported to stimulate T cell responses during antigen presentation. Therefore, we tested whether Ag-specific immune responses as well as protective immunity are influenced by coinjecting with B7.1 and CD28 cDNAs in a mouse HSV-2 challenge model system. Methods: ELISA was used to detect levels of antibodies, cytokines and chemokines while thymidine incorporation assay was used to evaluate T cell proliferation levels. Results: Ag-specific antibody responses were enhanced by CD28 coinjection but not by B7.1 coinjection. Furthermore, CD28 coinjection increased IgG1 production to a significant level, as compared to pgD+pcDNA3, suggesting that CD28 drives Th2 type responses. In contrast, B7.1 coinjection showed the opposite, suggesting a Th1 bias. B7.1 coinjection also enhanced Ag-specific Th cell proliferative responses as well as production of Th1 type cytokines and chemokines significantly higher than pgD+pcDNA3. However, CD28 coinjection decreased Ag-specific Th cell proliferative responses as well as production of Th1 types of cytokines and chemokine significantly lower than pgD+pcDNA3. Only MCP-1 production was enhanced by CD28. B7.1 coimmunized animals exhibited an enhanced survival rate as well as decreased herpetic lesion formation, as compared to pgD+pcDNA3. In contrast, CD28 vaccinated animals exhibited decreased survival from lethal challenge. Conclusion: This study shows that B7.1 enhances protective Th1 type cellular immunity against HSV-2 challenge while CD28 drives a more detrimental Th2 type immunity against HSV-2 challenge, supporting an opposite role of B7.1 and CD28 in Ag-specific immune responses to a Th1 vs Th2 type.

• Knowledge Management Research
• /
• v.19 no.3
• /
• pp.89-112
• /
• 2018

Under exhibition circumstances, exhibition advertising by organizer is a mean to promote exhibition service to exhibitors and visitors while general advertising is to promote products and services to consumers. The objective of this research is to suggest advertising strategies by seeing differences in the impact of information quality and media credibility on visitor intention depending on the types of exhibition. This study adopted Elaboration Likelihood Model to measure the impact of central and peripheral cues on advertising attitude and its consequence on visitor intention. We further examined how these influence processes were moderated by exhibition types of B2B and B2C. We conducted survey from B2B and B2C exhibitions respectively, and analyzed structural equation model and moderator regression. We found that first, among factors of information quality as a central cue, argument strength has a positive impact on attitude towards advertising. Second, we also found among factors of media credibility as a peripheral cue, media trustworthiness has a positive impact on attitude towards advertising. Lastly, this study revealed that a type of exhibition moderates the central and peripheral routes towards advertising attitude, showing that B2C visitors are influenced by factors of information quality, and B2B visitors rather by media credibility. This study yields implications in that it gives marketers of organizer a background to set different marketing strategies depending on the types of exhibition.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2011

It is necessary to describe the hysteresis characteristics of magnetic material precisely for the analysis or design of system with ferromagnetic materials. Although Preisach model is regarded as the most accurate method to describe the hysteresis characteristics, it is not widely applied to the real systems because of some difficulties. The conventional Preisach model shows the numerical instabilities during the iterative computations because the density distribution obtained from the sets of M-H curves are strongly localized. To remove such numerical instabilities, M-B instead of M-H is adopted as an implementation variable in normal Preisach modeling. The two dimensional computations with hysteresis characteristics by using normal Preisach modeling are tested and the result showed that the modeling by using M-B variables showed better stabilities than M-H variables.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1197-1209
• /
• 1999

Twenty-one dogs(male 11 heads, female 10 heads) which were about 16 months ($16.3{\pm}3.5$) old and 10kg($10.1{\pm}2.0$) body weight, were allotted randomly into four groups as follows. Group I consisted of five dogs whose muscles were operated for sham muscle injuries. Group II consisted of seven dogs treated for cystic duct obstruction. Group III consisted of five dogs treated for the union fracture model. Group IV consisted of five dogs treated for the non-union fracture model. Radiographical and histological observations were carried out to determine bone alkaline phosphatase(BALP) and total alkaline phosphatase(TALP) values of each group for 20 weeks after the treatments with the condition of new bone formation. And also the applicability of percentage of BALP values to TALP (B/T) was studied after BALP was compared respectively with TALP. The level of TALP was increased without any relation to bone formation in group II, and all levels of BALP and B/T were increased in group III. The mean of B/T was high in statistical significance, due to varied levels of B/T and BALP. The changes of rates of B/T were significantly increased only in the case of the active new bone formation in group III, union fracture model. It was recognized that the mean values of B/T were statistical significant of the high applicability of the B/T ratio as an index of bone formation.

• Journal of the Korean housing association
• /
• v.17 no.5
• /
• pp.47-54
• /
• 2006

This study aims to evaluate the sound insulation performance of Korean traditional paper(Hanji) windows as a material of environmental friendly building. Six types of traditional windows with 4 types of traditional window positions, were installed in l/2.5 scale model house. And then according to KS F 2235, comparative sound level differences between outdoor and indoor were measured. The main results are as follows; 1) TL(Transmission Loss) of Korean traditional paper windows, which cover one eighth of total balcony window, are ranged from 15 to 19 dB(A) in the living room and from 8 to 11 dB(A) in the balcony space. 2) TL of Korean traditional paper windows, which cover one fourth of total balcony window, are ranged from 10 to 19 dB(A) in the living room and from 8 to 10 dB(A) in the balcony space. 3) TL of Korean traditional windows with one side-one layer paper is ranged from 10 to 21 dB(A) and two side-one layer paper is 15 to 23 dB(A) and two side-two layer paper is 19 to 23 dB(A) respectively.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.190-196
• /
• 2002

This paper presents millimeter wave monolithic microwave integrated circuit (MMIC) low noise amplifiers using a $0.15{\mu}m$ commercial pHEMT process. After carefully investigating design considerations for millimeter-wave applications, with emphasis on the active device model and electomagnetic (EM) simulation, we designed two single-ended low noise amplifiers, one for Q-band and one for V-band. The Q-band two stage amplifier showed an average noise figure of 2.2 dB with an 18.3 dB average gain at 44 GHz. The V-band two stage amplifier showed an average noise figure of 2.9 dB with a 14.7 dB average gain at 65 GHz. Our design technique and model demonstrates good agreement between measured and predicted results. Compared with the published data, this work also presents state-of-the-art performance in terms of the gain and noise figure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.116-130
• /
• 2019

This study investigates passenger-authored online reviews of airline services using social network analysis to compare the differences in customer perceptions between full service carriers (FSCs) and low cost carriers (LCCs). While deriving words with high frequency and weight matrix based on the text analysis for FSCs and LCCs respectively, we analyze the semantic network (betweenness centrality, eigenvector centrality, degree centrality) to compare the degree of connection between words in online reviews of each airline types using the social network analysis. Then we compare the words with high frequency and the connection degree to gauge their influences in the network. Moreover, we group eight clusters for FSCs and LCCs using the convergence of iterated correlations (CONCOR) analysis. Using the resultant clusters, we match the clusters to dimensions of two types of service quality models ($Gr{\ddot{o}}nroos$, Brady & Cronin (B&C)) to compare the airline service quality and determine which model fits better. From the semantic network analysis, FSCs are mainly related to inflight service words and LCCs are primarily related to the ground service words. The CONCOR analysis reveals that FSCs are mainly related to the dimension of outcome quality in $Gr{\ddot{o}}nroos$ model, but evenly distributed to the dimensions in B&C model. On the other hand, LCCs are primarily related to the dimensions of process quality in both $Gr{\ddot{o}}nroos$ and B&C models. From the CONCOR analysis, we also observe that B&C model fits better than $Gr{\ddot{o}}nroos$ model for the airline service because the former model can capture passenger perceptions more specifically than the latter model can.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.352-361
• /
• 2000

The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluate the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model, interference to carrier Ratio, I/C, ranges from -4 dB to 4dB, and at each 2 dB interval, 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. From the results, the third model(i.e. perfect power control) shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.