• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.29-35
• /
• 1993

A guided-wave TE to TM mode converter was demonstrated by using of the off-diagonal electrooptic coefficients in LiTaO$_{3}$. The input mode is coupled to the other orthogonal mode by the electrooptically induced off-diagonal polarizability. Compared with LiNbO$_{3}$, LiTaO$_{3}$ provides a smaller birefringence and thus a larger phase match period and larger optical bnadwidth. A novel electrode structure allowed a first-order Bragg-coupling phase matching. TE/TM mode conversion efficiency of 90% at 25 [V] was demonstrated with ${\lambda}$=0.63$\mu$m He-Ne laser.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.1-7
• /
• 2016

본 논문에서는 Ku 밴드 전체 대역에 걸쳐 광대역 주파수 특성을 얻을 수 있는 원뿔형 주름 혼안테나의 설계방법을 제안하였다. 혼안테나의 이득, 정재파비, 주편파와 교차편파의 비와 광대역 특성을 개선시키기 위하여 두 종류의 모드정합 컨버터를 원뿔형 주름 혼안테나 내부에 구성하였다. 하나의 형태는 원형도파관 종단 내부에 또 다른 형태는 혼플레어 전단에 설치하였다. 제안된 모드정합 컨버터들의 위치에 따라 두 가지 형태의 안테나 구조는 시뮬레이션을 통해 비교하고 분석되었다. 그리고 Ku 밴드 전체 주파수 대역인 12-18 GHz에서 정재파비가 2보다 작고 교차편파와 주편파의 비가 30dB, 안테나 이득이 20dB 이상인 값에서 안테나의 성능을 비교한 결과, 원형도파관 내에 모드정합 컨버터를 설계한 원뿔형 주름 혼안테나의 구조가 혼플레어 내에 모드정합 컨버터를 설계한 안테나의 구조보다 제반 성능이 더욱 안정적이고, 동시에 송수신할 수 있는 신호 주파수 대역이 광대역 특성을 갖는다. 따라서 이득과 VSWR, 복사패턴, 대역폭 등을 감안했을 때, 원형도파관 내부에 모드정합 컨버터를 설계한 구조가 좀 더 뛰어난 성능을 보였다.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.265-271
• /
• 2018

DC-DC buck converter is a critical building block in the power management integrated circuit (PMIC) architecture for the portable devices such as cellular phone, personal digital assistance (PDA) because of its power efficiency over a wide range of conversion ratio. To ensure a safe operation, avoid unexpected damages and enhance the reliability of the converter, fully-integrated protection circuits such as over voltage protection (OVP), under voltage lock out (UVLO), startup, and thermal shutdown (TSD) blocks are designed. In this paper, these three fully-integrated protection circuit blocks are proposed for use in the DC-DC buck converter. The buck converter with proposed protection blocks is operated with a switching frequency of 1 MHz in continuous conduction mode (CCM). In order to verify the proposed scheme, the buck converter has been designed using a 180 nm CMOS technology. The UVLO circuit is designed to track the input voltage and turns on/off the buck converter when the input voltage is higher/lower than 2.6 V, respectively. The OVP circuit blocks the buck converter's operation when the input voltage is over 3.3 V, thereby preventing the destruction of the devices inside the controller IC. The TSD circuit shuts down the converter's operation when the temperature is over $85^{\circ}C$. In order to verify the proposed scheme, these protection circuits were firstly verified through the simulation in SPICE. The proposed protection circuits were then fabricated and the measured results showed a good matching with the simulation results.

• ETRI Journal
• /
• 제27권3호
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.146-158
• /
• 2007

A multi-pulse GTO based voltage source converter (VSC) topology together with a fundamental frequency switching mode of gate control is a mature technology being widely used in static synchronous compensators (STATCOMs). The present practice in utility/industry is to employ a high number of pulses in the STATCOM, preferably a 48-pulse along with matching components of magnetics for dynamic reactive power compensation, voltage regulation, etc. in electrical networks. With an increase in the pulse order, need of power electronic devices and inter-facing magnetic apparatus increases multi-fold to achieve a desired operating performance. In this paper, a competitive topology with a fewer number of devices and reduced magnetics is evolved to develop an 18-pulse, 2-level $\pm$ 100MVAR STATCOM in which a GTO-VSC device is operated at fundamental frequency switching gate control. The inter-facing magnetics topology is conceptualized in two stages and with this harmonics distortion in the network is minimized to permissible IEEE-519 standard limits. This compensator is modeled, designed and simulated by a SimPowerSystems tool box in MATLAB platform and is tested for voltage regulation and power factor correction in power systems. The operating characteristics corresponding to steady state and dynamic operating conditions show an acceptable performance.

• 한국광학회지
• /
• 제17권5호
• /
• pp.430-436
• /
• 2006

1550nm 파장대역에서 편광에 관계없이 동작하는 $Ti:LiNbO_3\;2{\times}2$ 삽입/분기 광 멀티플렉서를 구현하였다. 소자는 두 개의 입 출력 광도파로, 두 개의 편광모드분리기, 두 개의 편광모드 변환기 그리고 전기광학효과로 파장을 가변시킬 수 있는 전극으로 구성되었다. TE, TM 편광에 대해서 단일모드 특성을 갖는 채널 광도파로는 x-cut $LiNbO_3$에 Ti 확산 방법으로 제작하였으며, 채널 광도파로 위에 배열된 $SiO_2$ 패드의 전단 스트레인을 이용하여 위상정합 편광모드변환기를 구현하였다. 한편 전기광학효과를 이용하여 파장을 가변시키기 위해서 전압을 인가하여 광도파로의 복 굴절률을 변화시켰다. 0.094nm/V 파장가변률과 최대 17nm 파장을 가변시켰으며, 8.2dB 부 모드레벨과 3.72nm FWHM을 측정하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.115-122
• /
• 2015

Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

• 한국전자파학회논문지
• /
• 제21권10호
• /
• pp.1169-1176
• /
• 2010

본 논문에서는 L1/L2 이중-밴드 GPS(Global Positioning System) 수신기용 RF 전단부를 설계하였다. 수신기는 Low IF 구조이며, 인덕터를 사용하지 않는 광대역 저잡음 증폭기(Low Noise Amplifier: LNA)와 이미지 제거를 위하여 다상 여과기(poly-phase filter)를 포함하는 quadrature 하향 변환 주파수 혼합기(quadrature down-conversion mixer) 및 전류 모드 논리(Current Mode Logic: CML) 주파수 분배기로 구성되어 있다. 저잡음 증폭기와 이미지 제거 주파수 혼합기는 높은 이득과 헤드룸 문제를 해결하기 위하여 전류 블리딩 기술을 이용하였으며, 광대역 입력 정합을 구현하기 위하여 공통 드레인 피드백을 이용하였다. $0.18{\mu}m$ CMOS 공정을 이용해 제작된 RF 전단부는 L1 밴드에서 38 dB 그리고 L2 밴드에서 41 dB의 이득을 보이며, IIP3는 L1 밴드에서 -29 dBm, L2 밴드에서는 -33 dBm이다. 입력 정합은 50 MHz에서 3 GHz까지 -10 dB 이하를 만족하며, 잡음 지수(Noise Figure: NF)는 L1 밴드에서는 3.81dB, L2 밴드에서는 3.71 dB를 보인다. 이미지 주파수 제거율은 36.5 dB이다. 설계된 RF 전단부의 칩 사이즈는 $1.2{\times}1.35mm^2$이다.