• 상하수도학회지
• /
• 제19권1호
• /
• pp.38-46
• /
• 2005

In this research, we tried to combine the coagulation/sedimentation process as pre-treatment with UF membrane filtration to reduce the membrane fouling and to improve the permeate water quality. We used the Jet Mixed Separator (JMS) as coagulation/sedimentation process. We observed that the HPC and E.Coli can't be removed through the direct UF memebrane filtation of surface water. The removal efficiency of dissolved organic substances, indicated by E260 and DOC, was 40% and 15%, respectively. However, the removal efficiency of it increased two time as a result of combination of JMS process as coagulation/sedimentation pre-treatment. This was resulted from the formation of high molecular humic micro-floc through JMS process. The accumulation amount of irreversible cake layer which was not removed by backwashing was less than direct UF membrane filtration of surface water. Moreover, the loading rate of fouling induced substances, such as humic substances and suspended substances, on membrane surface decreased drastically through JMS process. As a result, the accumulation amount of irreversible cake on membrane surface was decreased.

• Nuclear Engineering and Technology
• /
• 제40권2호
• /
• pp.117-126
• /
• 2008

In this paper, a new reactor core design is proposed on the basis of a mixed core concept consisting of a thermal zone and a fast zone. The geometric structure of the fuel assembly of the thermal zone is similar to that of a conventional thermal supercritical water-cooled reactor(SCWR) core with two fuel pin rows between the moderator channels. In spite of the counter-current flow mode, the co-current flow mode is used to simplify the design of the reactor core and the fuel assembly. The water temperature at the exit of the thermal zone is much lower than the water temperature at the outlet of the pressure vessel. This lower temperature reduces the maximum cladding temperature of the thermal zone. Furthermore, due to the high velocity of the fast zone, a wider lattice can be used in the fuel assembly and the nonuniformity of the local heat transfer can be minimized. This mixed core, which combines the merits of some existing thermal SCWR cores and fast SCWR cores, is proposed for further detailed analysis.

• 한국지반공학회논문집
• /
• 제26권4호
• /
• pp.15-26
• /
• 2010

폐타이어 파우더 혼합에 따른 동상억제 메커니즘을 규명하기 위해, 부동수, 열전도율, 동상실험 등 3종류의 실내실험을 수행하였다. 본 연구에서는 폐타이어 혼합에 따른 투수계수 변화에 주목하여 먼저 마동결토의 불포화 투수계수를 계산하였고 ice-impeding factor, 혼합토내 토립자와 폐타이어 단면적을 고려하여 동결토frozen fringe내의 온도변화에 따른 투수계수 특성을 분석하였다. 그 결과 흡수속도와 투수계수 사이에는 비례관계가 존재함을 확인하였고, 동상성 저하의 주된 원인은 폐타이어 파우더 혼합에 따른 부동수분량과 투수계수의 감소임을 알 수 있었다. 또한 폐타이어 파우더 혼합토 구성성분의 체적비를 이용하여 흙과 폐타이어 간극내의 수분량을 정량적으로 산출하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.135-136
• /
• 2023

In this study, a concrete was prepared using an alkaline aqueous solution produced by electrolyzing potassium carbonate in order to improve the low initial strength of concrete using blast furnace slag. In order to confirm the increase in initial strength, the compressive strength of specimens was measured on the age of 7, 28 days. As a result, the blast furnace slag concrete using the electrolysis alkaline aqueous solution as the mixed water show high strength more than the blast furnace slag concrete using the general mixed water.

• 한국수자원학회논문집
• /
• 제53권3호
• /
• pp.167-179
• /
• 2020

최근 바이오폴리머 소재를 이용하여 자연 흙의 강도와 식생의 생장을 증진하는 새로운 제방 소재가 개발되었다. 본 연구에서는 바이오폴리머 혼합토를 친환경 제방 재료로 활용하기 위해 혼합토로 조성된 식생 매트의 한계 소류력을 평가하였다. 혼합토는 베타글루칸을 주재료로 모래와 황토를 혼합하여 조성하였다. 실규모 시험체를 제작하여 혼합토를 3 cm 도포하였으며 식생과 매트를 이용하여 4개의 시험체를 제작하였다. 실규모 실험에 의해 손상과 토양유실을 관측하여 한계 소류력을 결정하였다. 식생 호안의 특성상 식생의 피복도에 따라 영향을 받기는 하지만 식생이 활착된 경우 개략적으로 한계소류력 42 N/㎡, 한계유속 4 m/sec을 실험을 통해 확인하였다. 또한 매트공법이 적용된 경우에는 뿌리와 매트의 결합으로 침식저항성이 강화됨을 확인하였다.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2133-2141
• /
• 2011

세계적으로 건강기능식품의 주변 환경은 매우 빠르게 변하고 있다. 2012년 세계기능성 음료시장은 269억달러 규모, 아태지역 시장은 136억달러 규모가 될 것으로 전망하고 있다. 국내 먹는 샘물 시장은 2008년 4,400억원 규모를 형성하고 있고, 제주삼다수의 매출액은 891억원이다. 그러나 "제주삼다수"라는 브랜드는 한계성을 지니고 있다. 이에 대한 방안으로 제주물의 품질 우수성을 알리는 포괄적인 광고가 필요하며, 제주 물을 이용한 기능성 음료 및 혼합음료 개발의 성공 가능성을 높이기 위해서 제주워터(Jeju Water)라는 글로벌 통합브랜드 개발이 필요하다. 기능성 및 혼합음료 제품개발시 제주지역의 농산물의 기능성을 적극 활용해 물산업과 제주의 1차산업을 연계해 농산물의 과잉생산 처리와 고부가가치화를 촉진시킬 필요가 있다.

• 한국수자원학회논문집
• /
• 제32권5호
• /
• pp.525-535
• /
• 1999

유역내의 수력 에너지자원과 수자원의 효율적 관리를 위하여 통합혼합정수계획법(combined mixed integer proguamming)을 사용한 최적 발전기 운영계획 모형을 개발하였다. 통합혼합정수계획법 모형은 기왕에 개발된 혼합정수계획법 모형에서 발생할 수 있는 모순을 해결하기 위하여 개발되었다. 또한, 조건부 제약조건과 택일 제약조건들을 선형계획법 모형에서 사용 할 수 있도록 수정하는 기법을 제안하였다. 미국 콜로라도강 하부유역에 통합혼합정수계획법을 적용한 경우를, 최적화 모형을 사용하지 않은 경우 및 혼합정수계획법을 사용한 경우와 비교한 결과, 최적화 기법을 사용하지 않은 경우보다 유역효율이 0.67% 증가하였고, 혼합정수계획법을 사용한 경우보다 유역효율이 1.53% 감소하였다. 통합혼합정수게획모형의 효율이 감소한 이유는 혼합정수계획법모형보다 전력요구량과의 허용오차를 감소시켰기 때문인 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.247-255
• /
• 2004

The cooling characteristic of water-air mixed spray for high water mass flux is not well defined, compared to that of highly pressurized spray. A series of research program was planned to develop the boiling correlation for whole temperature range in case of water-air mixed spray with high water mass flux. The cooling experiments of hot steel surface with initial temperature of 820$^{\circ}C$ were conducted in unsteady state with relatively high water mass flux. A computer program was developed to calculate the heat flux inversely from measured data by three inserted thermocouples. Finally the effects of water and air mass flux on the averaged film boiling heat flux and wetting temperature were studied. In this 1st report, it is found that the boiling curve was similar to that of highly pressurized spray and the decreased slope of heat flux in film boiling region with respect to surface temperature became steep by increasing air mass flux. Also it is shown that, by increasing air mass flux, the averaged heat flux in film boiling region was increased, and then saturated and the wetting temperature was increased, and then decreased. Finally when the heat flux in film boiling region is compared with that of highly pressurized spray, it is known that the cooling is improved by introducing air up to 60%.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.118-125
• /
• 1997

Conventional sedimentation method has some limitations for turbidity removal in water treatment because drinking water sources are getting polluted. Removal rates of turbidity using DAF and sedimentation process were compared for various water conditions to know whether DAF is effective to improve sedimentation process. Water samples were clay(gravity 2.65) water 100mg/l, H raw water, mixed water of H raw water and clay 100mg/l, and mixed water of HA(Humic Acid) 5mg/l and clay 100mg/l. Other parameters were temperature, coagulants(Alum, $FeCl_3$), and treatment time. Water temperature greatly affected in removal rates of turbidity for sedimentation and DAF. Generally DAF was more effective in removal rates of turbidity than sedimentation at the same experimental condition. Removal rates of $UV_{254}$ were high to over 90%, and independent of temperature and coagulant.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.382-387
• /
• 1998

Triaxial compression tests were run to study on the undrained strength characteristics of fiber mixed kaolin clay(Hadong). The influence of various test parameters such as amount and aspect ratio(ratio of length to diameter) of fiber, confining stress was also investigated. Test results showed that the increase in aspect ratio was increased in deviator stress at failure, but no effect on pore water pressure at failure. Deviator stress at failure was also increased at 0.5％ mixing ratio(weight fraction of fiber to that of soil solid) of fiber but it was, thereafter, decreased and wits reached to constant after 2％ mixing ratio. On the contrary, Pore water pressure at failure was increased as mixing ratio of fiber was greater than 1%. Deviator stress and pore water pressure of both clay and fiber mixed clay(FMC) at failure were increased as confining stress was increased. Deviator stress of FMC at failure was about 10％ larger than that of clay, but pore water pressure of FMC at failure was almost similar to that of clay.