• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.219-224
• /
• 2006

In this paper, to verify the safety of railway vehicle structure, we describe the test methods of roof structure. The purpose of GM/RT 2100' missile protection article is to minimise the risk of injury which could result from the penetration into a vehicle body by missile such as stones and bricks. we carried out weight drop test on the roof structure in accordance with GM/RT 2100. The test results showed that the penetration did not occer.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.16-22
• /
• 2015

The pressure is generally lower than that of the freestream at the base of a missile body due to the energy loss by the flow separation around the edge of the base. The base pressure changes in the presence of the thrust jet due to the interaction between the base flow of the missile and the jet flow. In this study, behavior of the missile base pressure by the change of the jet exit pressure and the freestream condition is investigated using the CFD(Computational Fluid Dynamics) method. Effects of the grid type and the freestream condition are tested. The results are compared with the semi-empirical predictions and the flight test data. The CFD results agree well with the flight test data. The semi-empirical predictions overestimate the base pressure when jet thrust is strong for low freestream speed.

• 한국추진공학회지
• /
• 제25권3호
• /
• pp.81-88
• /
• 2021

아음속 순항 유도탄의 추진시스템은 소형 가스터빈 엔진을 중심으로 공기흡입관, 탄내 연료이송계통 등으로 구성된다. 이는 엔진의 수락시험으로부터 시작하여, 엔진의 여러 기능 및 보기류의 설계수정, 엔진과 연동되는 각종 탄내 장비들의 설계/개발 및 상호 인터페이스 확인을 위한 해석과 통합시험 등으로 완성된다. 여기서는 이와 같은 소형 가스터빈 엔진을 이용한 유도탄 추진시스템 체계통합기술의 구성과 각 단계별 요소기술의 개요를 서술한다.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.844-852
• /
• 2017

Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.623-629
• /
• 2018

The acceleration and the angular velocity that include natural frequencies of a missile detected by Inertial Measurement Unit(IMU) are transmitted to the control loop of a missile. The control loop command that is calculated using above signals can cause the resonance of the missile while it flies. Hence it is common to adapt the filter and the control loop for attenuating or eliminating the undesired signals such as natural frequencies. This paper introduces the new test technique using a floating system for performance evaluation of the designed filter and the control loop prior to a flight test. The proposed scheme can check out the degradation property of vibration in the filter and the control loop, while the conventional hardware-in-the-loop simulation(HILS) scheme cannot.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.337-344
• /
• 2017

In this paper, the optical axis alignment(OAA) of an infrared sensor(IRS) using a microwave sensor(MWS) was presented as a method of an axis alignment to minimize the problems that could be caused by the misalignment of the two sensors in the missile including the dual-mode sensor. The azimuth(AZ) and elevation(EL) angles of the two targets used for each sensor test were calculated by using the transformation equation and the test results of the MWS and IRS, and then the proposed OAA was verified by comparing the angles. Furthermore, the validity of the proposed OAA was demonstrated by confirming the abnormality of the OAA through the test results of the electro optical head(EOH) of the IRS which was equipped with a tilt on the missile fuselage.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.393-404
• /
• 2017

Side jet effect on the aerodynamic characteristics of a missile was investigated using experimental and computational methods. A couple of side jets were injected toward outward downstream at mid point of missile body. Cold air jet was used in the wind tunnel test, and cold and hot jet were used in the computation. Wind tunnel test was carried out with jet and without jet, and calculation was performed for three cases ; no jet, cold air jet, and hot mixture gas jet. From the comparison of measured and calculated data for all cases, two points could be deduced. Firstly, side jet made static stability to be unstable by increasing body normal force near the side jet exit and by decreasing tail normal force. Secondly, hot mixture gas had more significant effect on the static stability of a missile-type body than cold air jet.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.505-517
• /
• 2016

The structural integrity of a dual-purpose metal cask currently under development by the Korea Radioactive Waste Agency (KORAD) was evaluated, through numerical simulations and a model test, under high-speed missile impact reflecting targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from literature. In the impact scenario, a missile flying horizontally hits the top side of the cask, which is freestanding on a concrete pad, with a velocity of 150 m/s. A simplified missile simulating a commercial aircraft engine was designed from an impact loade-time function available in literature. In the analyses, the dynamic behavior of the metal cask and the integrity of the containment boundary were assessed. The simulation results were compared with the test results for a 1:3 scale model. Although the dynamic behavior of the cask in the model test did not match exactly with the prediction from the numerical simulation, other structural responses, such as the acceleration and strain history during the impact, showed very good agreement. Moreover, the containment function of the cask survived the missile impact as expected from the numerical simulation. Thus, the procedure and methodology adopted in the structural numerical analyses were successfully validated.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.213-221
• /
• 2024

Aircraft's operational effectiveness is reduced due to threats from enemy anti-aircraft weapons, which is a weak point. In particular, guided missiles, which pose a threat to aircraft, are rapidly developing due to technological advancements in seekers, and are classified as one of the important technologies in weapon systems. Missile approach warning equipment installed to ensure aircraft survivability detects guided missiles and provides relevant information to respond. Tests were conducted domestically to verify the detection level of missile approach warning equipment, and test results were presented under various test conditions.

• 한국항행학회논문지
• /
• 제26권1호
• /
• pp.9-14
• /
• 2022

종래 유도탄의 경우 대부분 유도탄의 전방부에 GPS (Global Positioning System) 안테나가 장착되는 경우가 많아 종말 유도단계에서 수직 낙하하는 유도탄의 경우 GPS 안테나가 전방부에 위치하면 동체에 의한 위성 신호 가림 현상이 생겨 GPS 성능이 떨어진다. 본 논문에서는 위성 신호에 대한 가시영역을 최대로 확보하기 위해 GPS 안테나를 유도탄의 후방 부에 기울임을 주어 배치하였으며 배열안테나의 패치를 기울여 설계하는 것을 제안하였다. 제안된 안테나 배치 형상에 대하여 GPS 신호의 신호 수신 범위를 분석하기 위해 LOS (Line Of Sight) 관점에서 가시영역을 분석하였고 실제 무반향 챔버에서 수신 신호 세기 측정을 통해 위성 신호의 유효 수신영역을 분석하였다. 또한 야외시험과 비행시험을 통해서 위성 신호의 음영지역이 줄어드는 것을 확인함으로써 GPS 안테나가 유도탄의 후방에 배치되었을 때 얻을 수 있는 장점을 확인하였다.