• Journal of the Korean Vacuum Society
• /
• v.13 no.4
• /
• pp.145-149
• /
• 2004

We have grown piezoelectric oxide films by RF magnetron sputtering using miscut substrates. Films were Brown on(001) $SrTiO_3$ substrates with miscut angles from 0 to 8 degrees toward the (100) direction. Films on high miscut substrates (>$4^{\circ}$) showed almost the pure perovskite phase in x-ray diffraction and were nearly stoichiometric. In contrast, films on exact (001) $SrTiO_3$ contained a high volume fraction of pyrochlore phases. A film on an $8^{\circ}$ miscut substrate exhibits a polarization hysteresis loop with a remnent polarization of 20$\mu$C/$\textrm{cm}^2$ at room temperature.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.04a
• /
• pp.38-39
• /
• 1999

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.115-118
• /
• 2007

This study investigated the effects of different kinds of seed crystals with miscut angles and pretreatment on the characteristics of a RE-123 superconductor processed by a top-seeded melt-growth (TSMG) method. When the seed crystal was heat-treated in an oxygen atmosphere, the surface structure was cleaned removing hydroxide. When the seed crystal had a miscut angle, in addition, the surface structure showed a well defined hill-and-valley structure after heat-treatment. A better microstructure, with a well-distributed small RE-123 phase, was obtained using a high miscut angle after heat-treatment in an oxygen atmosphere. As a result of the microstructure improvement, the magnetic characteristics also improved. The experimental result can be explained by reduction of nucleation activation energy.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.168-172
• /
• 2016

$BiMnO_3$ has been a promising candidate as a magnetoelectric multiferroic while there have been many controversial reports on its ferroelectricity. The detailed analysis of its film growth, especially the growth of thin film having monoclinic symmetry has not been reported. We studied the effect of miscut angle, the substrate surface, and film thickness on the symmetry of $BiMnO_3$ thin film. A flat $SrTiO_3$ (110) substrate resulted in a thin film with three domains of $BiMnO_3$ and 1 degree miscut in the $SrTiO_3$ (110) substrate resulted in dominant domain preference in the $BiMnO_3$ thin film. The larger miscut resulted in a nearly perfect detwinned $BiMnO_3$ film with a monoclinic phase. This strong power of domain selection due to the step edge of the substrate was efficient even for the thicker film which showed a rather relaxed growth behavior along the $SrTiO_3$ [1-10] direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.314.1-314.1
• /
• 2014

The properties of Ni/Au Ohmic contacts formed on nonpolar a-plane GaN grown on r-plane sapphire substrate with different tilt angles are investigated using current-voltage (I-V) measurements. To investigate the effects of pattern direction and size on Ohmic contact properties of a-plane GaN, transmission line method (TLM) patterns are formed either along c-axis and m-axis on nonpolar GaN surface with different size. I-V measurement results show that the size of TLM pattern and formation direction of electrode have an effect on the electrical properties of a-plane GaN. The large sized patterns show the relatively lower sheet resistance compared to the small sized patterns. In addition, the sheet resistance of a-plane GaN along m-axis shows lower values than that along the c-axis. Finally, the effects of miscut angle of r-sapphire substrate ($0.2^{\circ}$, 0.4oand $0.6^{\circ}$) on electrical properties of a-plane GaN will be discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.300-300
• /
• 2011

Si oxidation is a key process in developing silicon devices, such as highly integrated metal-oxide-semiconductor (MOS) transistors and antireflection-coating (ARC) on solar cell substrate. Many experimental and theoritical studies have been carried out for elucidating oxidation processes and adsorption structure using ab initio total energy and electronic structure calcultaions. However, the initial oxidation processes at step edge on vicinal Si surface have not been studied using the ReaxFF reactive force field. In this work, strucutural change, charge distribution of oxidized Si throughout the depth from Si surface were observed during oxidation processes on vicinal Si(001) surface inclined by $10.5^{\circ}$ of miscut angle toward [100]. Adsorption energys of step edge and flat terrace were calculated to compare the oxidation reaction at step edge and flat terrace on Si surface.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.519-523
• /
• 1999

Epitaxial thickness $t_e(T_s)$ of Si films grown at the substrate temperature $T_s$=80~30$0^{\circ}C$ by ultra-high vacuum ion-beam sputter deposition onto nominally-singular, [100]-miscut Si(001) was measured. $t_e(T_s)$ values of films grown on vicinal Si(001) substrates were decreases compared to those of films grown on nominally-singular Si(001). Evolution of surface roughness measured by atomic force microscopy of films grown at $300^{\circ}C$ showed that the increases step density in vicinal substrates increases the tendency toward unstable growth resulting in larger surface roughness, which in turn decreases te.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.16-20
• /
• 2015

We investigated optical properties of an electron-doped copper oxide high temperature superconductor, $Pr_{0.85}LaCe_{0.15}CuO_4$ (PLCCO) single crystal. We obtained the optical conductivity from measured reflectance at various temperatures. We found our data contained c-axis longitudinal optical (LO) phonon modes due to miscut and intrinsic lattice distortion. We applied an extended Drude model to study the correlations between charge carriers in the system. The LO phonons appear as strong sharp peaks in the optical scattering rate. We tried to remove the LO phonon modes by using the energy loss function, which also shows the LO phonons as peaks, and could not remove them completely. We extracted the electron-boson spectral density function using a generalized Allen's formula. We observed that the resulting electron-boson density show similar temperature dependence as hole-doped cuprates.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.479-482
• /
• 2007

InN nanograins were directly grown on $0.3^{\circ}$-miscut (toward M-plane) c-plane sapphire substrates by hydride vapor phase epitaxy (HVPE) and their growth characteristics were investigated by utilizing x-ray scattering. Depending on the various growth parameters, the formation of InN was sensitively influenced. Six samples were grown by changing HCl flow rate, the substrate temperature and Ga/In source zone temperature. All the samples were grown on unintentionally $NH_3-pretreated$ sapphire substrates. By increasing the flow rate of HCl from 10 sccm to 20 sccm, the formation of GaN grains with different orientations was observed. On the other hand, when the substrate temperature was raised from $680^{\circ}C$ to $760^{\circ}C$, the increased substrate temperature dramatically suppressed the formation of InN. A similar behavior was observed for the samples grown with different source zone temperatures. By decreasing the source zone temperature from $460^{\circ}C$ to $420^{\circ}C$, a similar behavior was observed.