• 품질경영학회지
• /
• 제18권2호
• /
• pp.33-42
• /
• 1990

This paper proposes the maintenance model of multi-component system when the failure characteristics and types of components are considered. In this model, it is assumed that a system is composed of a critical component, a major component and a minor component. Also, failure types is classified into major failure and minor failure. If major failure occurs to critical component before system age replacement time, the system is renewed. If major failure does not occur until its age replacement time, preventive maintenance is performed at age replacement time T. Minimal repairs are carried out after each minor failure. Major component is minimal-repaired if any failure is discovered during operation. Minor component should be replaced as soon as any failure is found. This paper determines the optimal replacement time of the system which minimizes total maintenance cost. Numerical example illustrates these results.

• 음성과학
• /
• 제12권2호
• /
• pp.153-170
• /
• 2005

The sub-Nyquist nonuniform sampling (SNNS) and the perfect reconstruction (PR) formula are proposed for the development of a systematic method to obtain minimal representation of a speech signal. In the proposed method, the instantaneous sampling frequency (ISF) varies, depending on the least upper boundary of spectral support of a speech signal in time-frequency domain (TFD). The definition of the instantaneous bandwidth (IB), which determines the ISF and is used for generating the set of samples that represent continuous-time signals perfectly, is given. Also, the spectral characteristics of the sampled data generated by the sub-Nyquist nonuniform sampling method is analyzed. The proposed method doesn't generate the redundant samples due to the time-varying property of the instantaneous bandwidth of a speech signal.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권2호
• /
• pp.167-176
• /
• 2011

This paper introduces models for preventive maintenance policies and considers periodic preventive maintenance policy with minimal repair when the failure of system occurs. It is assumed that minimal repairs do not change the failure rate of the system. The failure rate under prevention maintenance received an effect by a previously prevention maintenance and the slope of failure rate increases the model where it considered. Also the start point of failure rate under prevention maintenance considers the degradation of system and that it increases quotient, it assumed. Per unit time it bought an expectation cost from under this prevention maintenance policy. We obtain the optimal periodic time and the number for the periodic preventive maintenance by using Nakagawa's Algorithm, which minimizes the expected cost per unit time.

• 미생물학회지
• /
• 제27권3호
• /
• pp.310-315
• /
• 1989

식물의 잎에 세균성 정무늬병을 야기시키는 식울 병원성균인 Pseudomonas syringae pv. tuhaci는 tabtoxin 이라는 phytotoxin 을 생성하는데 이 toxin을 미생물학적으로 간편하게 검색하는 방법플 여러가지 지시균주를 사용하여 각족 배지에서 검토하였다. Minimal A agar medium에서는 tabtoxin 검색에 Agrobactcrium tumefaces가 가장 유용한 균주였으며 minimal glucose agar m$\varepsilon$dium 에서도 역시 마찬가시의 견과를 얻였다 Complex agar medium 에서는 사용된 모든 지시균주에 대해 증식저지환이 형성되지 않아, tabtoxin이 생성되지 않음알수 있었다. 배양온도에 따른 tabtox의 생성능은 $20^{\circ}C$ 빛 $30^{\circ}C$ 에서 최적이였으며 배양시간이 경과함에 따라 tabtoxin 생성량이 증가 하였다. Glutamine을 minimal glucose agar medium에 첨가하여 tabtoxin 에 대한 지시 균주의 반응은 첨 가한 glutamine 의 양이 증가할수록 tabtoxin에 의한 생육억제가 감소함을 알 수 있었다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.221-233
• /
• 2007

본 논문에서는 고성능 단축 선형전동기에 적용할 수 있는 최단시간 위치 패턴 알고리즘에 대하여 논한다. 근래 들어 LCD/PDP 및 반도체 산업이 발달함에 따라 대형의 고성능 위치제어 시스템에 대한 요구가 높아지고 있으며 이러한 시스템에서는 공정 주기의 단축을 위하여 시간요소를 최소화시킨 최적 위치 패턴이 반드시 필요하다. 특히 반도체 산업 분야에서는 공작기계 분야와 달리 3차원 입체 위치 패턴보다는 단축 패턴에 대한 수요가 비교적 많은 편이다. 본 연구에서는 가속도가 사다리형인 위치 패턴을 기본으로 하여 연구를 진행하였으며 위치 및 시간을 변수로 고려한 패턴 분석을 통하여 최단시간에 목적하는 위치에 도달하기 위한 패턴을 비교적 간단히 구현할 수 있음을 보이고 이를 시뮬레이션 및 간이 실험으로 구현 가능성을 입증하였다.

• 대한족부족관절학회지
• /
• 제11권2호
• /
• pp.160-165
• /
• 2007

Purpose: Good results using minimal invasive hallux valgus surgery has been reported recently. We evaluate the usefulness of linear distal metatarsal osteotomy with minimal skin incision in mild and moderate hallux valgus deformity. Materials and Methods: Twenty-eight patients (thirty-one cases) who had mild to moderate hallux valgus deformity and underwent linear distal metatarsal osteotomy using minimal skin incision were evaluated between February 2005 and February 2006. Hallux-metatarsophalangeal-interphalangeal scale of AOFAS (American Orthopaedic Foot and Ankle Society) score was used as clinical evaluation. Preoperative, postoperative, after pin removal, and final follow up plain radiographs were used as radiologic evaluation. Results: Twenty-six cases (83%) among thirty-one cases showed more than average satisfaction, Average AOFAS score were improved from 63.2 points (range 45-74 points) to 86.4 points (range 67-93 points). Preoperative radiologic index of IMA $14.0^{\circ}$ (range $10-18^{\circ}$), HVA $30.2^{\circ}$ (range $19-39^{\circ}$), DMAA $13.8^{\circ}$ (range $5-23^{\circ}$) were improved postoperatively as IMA $8.3^{\circ}$ (range $5-10^{\circ}$), HVA $10.5^{\circ}$ (range $2-20^{\circ}$), DMAA $7.2^{\circ}$ (range $0-14^{\circ}$) correctively. Mean operative time was 15.5 minutes (range 11-18 minutes) and mean operative time was 5.6 days (range 2-8 days). Conclusion: Despite small skin incision and short operative time and admission period, linear distal metatarsal osteotomy with minimal skin incision showed similar results with conventional distal metatarsal osteotomy. Thus, it was thought to be useful operation in mild and moderate hallux valgus deformity.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.201-214
• /
• 2020

Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.

• 한국정보처리학회논문지
• /
• 제5권9호
• /
• pp.2415-2420
• /
• 1998

주어진 문자열을 환형 이동한 문자열들 중에서 사전적 순서로 가장 작은 것을 찾는 선형 시간 알고리즘을 제시한다. 이 문제는 등방성의 셀룰러 오토마타의 상태전이함수의 효율적인 구현에서 생긴다. 이 문제에 대한 단순한 알고리즘은 이차시간을 필요로 한다. 본 논문에서 제안하는 알고리즘은 부분스트링들의 비교 결과를 저장하고 나중에 같은 계산이 필요한 경우에 저장한 결과를 다시 사용함으로서 선형시간에 문제를 해결한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.229-239
• /
• 2013

This paper reports a manner to use a Bayesian approach to derive the optimal replacement policy. In order to produce a system with minimal repair warranty, a replacement model with the extended warranty is considered. Within the warranty period, the failed system is minimally repaired by the manufacturer at no cost to the end-user. The failure time is assumed to follow a Weibull distribution with unknown parameters. The expected cost rate per unit time, from the end-user's viewpoints, is induced by the Bayesian approach, and the optimal replacement policy to minimize the cost rate is proposed. Finally, a numerical example illustrating to derive the optimal replacement policy based on the Bayesian approach is described.

• Journal of the Korean Data and Information Science Society
• /
• 제17권3호
• /
• pp.743-752
• /
• 2006

This paper considers a Bayesian approach to replacement policy model with minimal repair. We use the criterion based on the expected cost and the expected downtime to determine the optimal replacement period. To do so, we obtain the expected cost rate per unit time and the expected downtime per unit time, respectively. When the failure time is Weibull distribution with uncertain parameters, a Bayesian approach is established to formally express and update the uncertain parameters for determining an optimal maintenance policy. Especially, the overall value function suggested by Jiagn and Ji(2002) is applied to obtain the optimal replacement period. The numerical examples are presented for illustrative purpose.