• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.37-43
• /
• 2014

Natural disasters such as earthquakes and tsunamis occur suddenly, so that they cause massive loss of lives and property. Especially earthquakes represent a particularly severe threat because of the extensive damage accompanied by them. In Korea, an earthquake-resistant design has been rarely applied to a design or construction of slope. However, in resent years, the researches for earthquake-resistance have been performed because the importance on the earthquake-resistance is perceived and highlighted. Soil nail method, one of the slope stability methods, is excellent for its constructability and cost effectiveness, as compared with other stability methods. Also, this method has been widely used for reinforced construction for slope stability. The studies of soil nail method have been performed on the interaction behavior between nails and slopes as well as the varied load condition such as static load, dynamic load and so on. Nevertheless, there has been minimal research regarding the constraint condition of nail head. In this study, the numerical analysis was performed for identifying effect on slope stability for the constrain condition of the soil nail. The result shows that the resistance of constrained the nail head on reinforced slope is larger compared to the one of unconstrained nail head.

• The Journal of Traditional Korean Medicine
• /
• v.15 no.1
• /
• pp.128-144
• /
• 2006

This Study aims at looking into the use of oriental medical services in treating hypertension. The first objective to be explored through this study is the morbidity caused by the disease, classifying them by age, gender, and occupation. The second is to determine the regular use of anti-hypertensive medicine and their efficacy in controlling blood-pressure. The third is to investigate the use-rate and satisfaction of oriental medical service. 838 households across the country, were asked to answer questionnaires for the period of time from Apr. to Jun. 2005. The conclusion from the survey can be summarized as following. The age of which the first medical diagnosis of hypertension were made showed lower in males, those with higher education and income. The study showed females were more active in blood-pressure control, with their frequent monitoring of blood-pressure for the past year. With age, people in under 50 age group proved to be less active. The management of high blood pressure was more effective in group with regular dosage compared to group with irregular use of anti-hypertensive medication, but their difference was minimal. Also, group with no medication showed signs of blood-pressure control. The use of oriental medical service for the past year, were more frequent in groups with lower education, either low or high income, old age, females and occupations in agriculture, forestry and fishing industry. Results were similar in both general population and high blood-pressure patient group. Females, people over 51 years old and with lower education showed more intentions in utilizing oriental medical services in the future. Results were similar in both general population and high blood-pressure patient group. It is necessary to offer a more accurate information on oriental medical treatments. Also, a systematic reform to reduce the patient's share of the treatment cost, as well as, heightening public awareness on the infirmity of present blood-pressure management system is crucial.

• Korea Real Estate Review
• /
• v.28 no.4
• /
• pp.53-62
• /
• 2018

When the contractor does not receive payment for his work due to the client's funding default, he can take various legal measures against the client, in addition to refusing to transfer the building under construction to the client. To claim top payment priority and to demand the equal enforcement of the law by applying for compulsory auction or auction by exercising the right of lien, the contractor should know the construction phase or the point in time when he could exercise a lien or apply for a forced auction of the unregistered building. This study was conducted to examine qualification for lien and auction of an unregistered building. First, the general criteria for qualification for lien from qualification for ownership were examined. This means that an unregistered building can be subject to lien from a certain point in time in the construction phase, where the ownership is qualified as an independent real estate with minimal pillars, roofs, and walls. Second, the contents of the narrow and broad auction qualification were analyzed. As the contractor can select the appropriate legal means to reimburse the construction cost for the unregistered building, the results of this study are expected to provide the bases for qualification for lien on and auction of unregistered buildings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.215-217
• /
• 2014

A system architecture design relying only on the experience of its designer varies in quality in line with the designer's personal experience and knowledge ability. Likewise, a wrong estimation of hardware capacity ends up in waste of resources. In practice, a range of post-hoc monitoring tools are in operation, without providing any method for estimating and reflecting the performance at an early stage of architecture design. Provided capacity requirement is estimated in advance with simulation at the stage of design, the system capacity ends up in waste of resources. In practice, a range of post-hoc monitoring tools are in operation, without providing any method for estimating and reflecting the performance at an early stage of architecture design. Provided capacity requirement is estimated in advance with simulation at the stage of design, the system performance requirement can be met with a minimal cost while the waste of resources can be reduced to a great extent. In this context, the present study develops a pilot simulation model for hardware architecture design and then verifies its validity in an experiment. If the error rate falls within a permissible range in the experiment, the simulation model may be considered to reflect well the characteristics of real-life information system architecture.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2022

This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.337-347
• /
• 2007

An embedded system is called a multi-mode embedded system if it performs multiple applications by dynamically reconfiguring the system functionality. Further, the embedded system is called a multi-mode multi-task embedded system if it additionally supports multiple tasks to be executed in a mode. In this Paper, we address a HW/SW partitioning problem, that is, HW/SW partitioning of multi-mode multi-task embedded applications with timing constraints of tasks. The objective of the optimization problem is to find a minimal total system cost of allocation/mapping of processing resources to functional modules in tasks together with a schedule that satisfies the timing constraints. The key success of solving the problem is closely related to the degree of the amount of utilization of the potential parallelism among the executions of modules. However, due to an inherently excessively large search space of the parallelism, and to make the task of schedulabilty analysis easy, the prior HW/SW partitioning methods have not been able to fully exploit the potential parallel execution of modules. To overcome the limitation, we propose a set of comprehensive HW/SW partitioning techniques which solve the three subproblems of the partitioning problem simultaneously: (1) allocation of processing resources, (2) mapping the processing resources to the modules in tasks, and (3) determining an execution schedule of modules. Specifically, based on a precise measurement on the parallel execution and schedulability of modules, we develop a stepwise refinement partitioning technique for single-mode multi-task applications. The proposed techniques is then extended to solve the HW/SW partitioning problem of multi-mode multi-task applications. From experiments with a set of real-life applications, it is shown that the proposed techniques are able to reduce the implementation cost by 19.0% and 17.0% for single- and multi-mode multi-task applications over that by the conventional method, respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Journal of agricultural medicine and community health
• /
• v.13 no.1
• /
• pp.3-18
• /
• 1988

The general objective of this research is to study behavioral pattern of health care utilization and to measure the level of utilization of the traditional medicine. The specific objective is to study utilization pattern and content of folk medicine which is the indegenous medical technology recognized part of traditional medicine. This research was under taken to generate valid information that will provide basis data for formulating general direction for health education activities and for designing service package for general population. A social survey method was employed to obtain required information for the research activities, The survey field team consisted of 20 surveyors who all participated is an intensive 2 day training course. A total of 3091 households were visited and interviewed by the field team during the period 7 September to 6 October 1987. The major findings obtained from the information collected by the field survey are as follows ; 1) General characteristics of the study households 2562 households out of 3091 households visited were selected for final data process, 80.2 of the selected households were nuclear families ; 17.4%, extended families ; others 2.4%. Only 4.3 percent of the study population in the urban households indicated "no schooling" whereas 14.2% of the rural household members falls within this category. Study population in the urban areas are more protected against diseases by the national medical insurance system than those in rural areas. In their self appraisal of living standard, those who responded with low group are 39.6% and 50.3% respectively by urban and rural households. 2) Morbidity status Period prevalence rate for all diseases during the preceding 15 days before the date of the household interview v as 243,0 per 1,000 study population. For cases with the illness duration of within 15 days, the initial points of medical entry were diversied ; 56.9%, drug stores ; 30.9%, clinics and hospitals ; 4.6% folk medicine ; 1.7% clinics of Korean oriental medicine. Among the chronic case; with illness duration of over 90 days, 34.6% of these people utilized clinics and hospitals of modern medicine ; 31.6%, drug stores ; 18.6% clinics of Korean oriental medicine ; 6.8% folk medical techniques. Noticeable is the almost ten fold increase from the mere 0.9% in the utilization of Korean oriental medicine, whereas in the utilization of folk medicine, it is short of two-fold increase. 3) Folk medicine and its utilization Households that use folk medicine for relief and care of signs and symptoms commonly encountered in daily life, number 1969 households, which accounts for 76.9% of all the study households. This rather high level use of folk medicine is not different from rural to urban areas. The order of frequency of utilizing folk medicine among the study people are : the highest 14.3% for the relief of indigestion ; 8.6% for burns ; 5.1% for common cold ; 4.7% for hiccough ; and 4.2% for hordeolum. A present various procedures of folk medicine is being used to relieve all kinds of symptoms. 192 symptoms are identified at present. The most frequently used procedures of folk medicine appear to be based either on principles of the Korean oriental medicine or of scientific knowledge. Based on these survey findings, proposals for utilizing folk medicine are as follows First, this survey's findings will be feed back to both on the job training and on the spot guidance of community health practitioners, public health nurses and other peripheral work force in the health field, who are in daily contacts with community. This feed back will assure that the health personnel carry out their health education and information activities that are based on the utilization pattern of folk medicine as found in the survey result. Second, studies will be soon implemented that are designed to measure the efficiency and potency of these procedures and to improve these procedures of folk medicine were most frequently used by the community. Third, studies will continue to systematize medicinal plants and skills of Korean oriental medicine that are easily available at minimal cost in daily life for the prevention of diseases and management of emergency cases.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.646-650
• /
• 2003

Many surgical techniques for ischemic mitral regurgitation (IMR) have been used with their excellent results and advantages. Here, we report our simple posterior annuloplasty techniques using vascular graft strip with their early results. Material and Method: Twenty two patients (13 male) underwent the operations for IMR (excluding the papillary muscle rupture) from December 2001 to January 2003. Preoperative risk factors were low ejection fraction (<35％, n=9), hypertension (n=13), diabetes (n=9), and renal failure (Cr>2.5, n=4). The wide dissection beneath the both vena cavae and interatrial groove after bicaval cannulation enabled the easy exposure of mitral valve even in the small left atrium. After eight or nine interrupted sutures in posterior annulus for anchoring the 6 mm width vascular graft strip, symmetric (n=8) or asymmetric (n=14) annuloplasty were done. Combined surgeries were CABG (n=21), Dor procedures (n=3), tricuspid valve annuloplasty (n=1), Maze operation (n=1), and aorto-right subclavian artery bypass (n=1). Result: Except for one surgical mortality, all the patients were doing well and the mean grade of regurgitation was decreased from 2.95 to 0.88, however the ejection fraction had not changed significantly just before discharge. Post-operative valve function evaluated before discharge revealed no residual regurgitation in 8 (including 1 patient with mild stenosis due to over reduction), minimal in 11, mild in 2, and mild to moderate regurgitation in 1. One patient who had ischemic cardiomyopathy and renal failure died of the arrhythmia during the hemodialysis. Conclusion: These observations suggest that the annuloplasty with vascular graft strip could be a safe and cost effective techniques for ischemic mitral regurgitation. However, the long term evaluation for the mitral valve function should be defined for the final conclusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.682-690
• /
• 2016

In order to present a realistic alternative to agricultural product brands which achieve quantitative growth but minimal qualitative growth, this study attempted to identify the structural factors that affect the agricultural product brand equity and quantitatively analyze the effects of the structural factors on the brand equity. For the quantitative analysis, a survey was conducted among customers with a structured questionnaire. The major results of the analysis are as follows. First, the structural factors of the agriculture product brand equity were theoretically reviewed through many preceding studies in regard to the brand and brand equity. Awareness, quality and loyalty were selected as the structural factors of the agriculture brand equity. Second, when the sub-structural factors of the agriculture product brand equity were analyzed, it was found that awareness includes familiarity, first reminding level, general awareness, sub-awareness, frequency of reference and level of people's logo recollection. Quality includes quality consistence, quality reliability, quality stability, general quality and quality for price. Loyalty includes recommendation, purchase intention, cost premium and repurchase intention. Third, in the analysis of the factors of awareness, quality and loyalty were found to be statistically significant at the 1% level of significance, and it turned out that the higher the awareness, quality and loyalty, the higher the brand equity. Fourth, the factors most influencing the brand equity differed from those obtained using the standardized coefficients. The highest standardized coefficients of the factors on rice and condiment vegetables were those for quality with values of 0.486 and 0.581, respectively, and the highest standardized coefficients of the factors on fruits and fruit vegetables were those for loyalty with values of 0.536 and 0.490, respectively. Finally, it was found to be more effective to develop brand policies using an approach based on awareness, quality and loyalty by item. Also, focusing on enhancing the quality when developing brand policies for rice and vegetables, or focusing on enhancing loyalty when developing brand policies for fruit and vegetables was found to be more efficient using the limited resources.