DOI QR코드

DOI QR Code

Effect of Constrain Condition of Soil Nail Head on Slope Stability

쏘일 네일 두부 구속조건이 사면 안정성에 미치는 영향

  • Kim, Yongeung (HONG-IK Engineering & Consultants Co., Ltd.) ;
  • Ahn, Kwangkuk (School of Civil Engineering, Chungbuk National University)
  • Received : 2013.11.02
  • Accepted : 2013.12.20
  • Published : 2014.02.01

Abstract

Natural disasters such as earthquakes and tsunamis occur suddenly, so that they cause massive loss of lives and property. Especially earthquakes represent a particularly severe threat because of the extensive damage accompanied by them. In Korea, an earthquake-resistant design has been rarely applied to a design or construction of slope. However, in resent years, the researches for earthquake-resistance have been performed because the importance on the earthquake-resistance is perceived and highlighted. Soil nail method, one of the slope stability methods, is excellent for its constructability and cost effectiveness, as compared with other stability methods. Also, this method has been widely used for reinforced construction for slope stability. The studies of soil nail method have been performed on the interaction behavior between nails and slopes as well as the varied load condition such as static load, dynamic load and so on. Nevertheless, there has been minimal research regarding the constraint condition of nail head. In this study, the numerical analysis was performed for identifying effect on slope stability for the constrain condition of the soil nail. The result shows that the resistance of constrained the nail head on reinforced slope is larger compared to the one of unconstrained nail head.

지진 및 해일과 같은 자연재해는 갑작스럽게 발생하므로 막대한 인명 피해 및 재산피해를 야기한다. 특히 지진은 이에 동반된 광범위한 피해로 인하여 특히 심각한 위협이 된다. 국내의 경우 비탈면 설계 및 시공 시 내진설계가 거의 적용되지 않고 있다. 하지만 점차적으로 내진에 대하여 중요성을 인지하고 이에 대한 연구가 이루어지고 있다. 비탈면의 안정화를 위한 공법 중 쏘일 네일 공법은 타 공법에 비해 시공성, 경제성이 우수한 공법으로 비탈면 안정을 위한 보강공사에도 광범위하게 이용되고 있다. 이러한 공법에 대한 연구는 네일과 주변지반의 상호거동에 대한 연구가 진행되고 있으며, 정하중 및 동하중 등의 다양한 하중조건에서의 안정성에 대한 연구가 활발히 진행되고 있다. 그럼에도 불구하고, 네일 두부의 구속조건에 따른 네일과 비탈면과의 상호거동에 대한 연구는 미비한 실정이다. 이에 본 연구에서는 네일 두부 구속조건에 따른 보강 비탈면의 안정성에 미치는 영향을 확인하기 위해 수치해석을 수행하였다. 그 결과 지진하중에 대하여 네일 두부가 구속된 경우가 비구속된 경우에 비해 지진하중에 대하여 저항이 큰 것으로 나타났다.

Keywords

References

  1. Ahn, J. K. (2008), A study on the analysis methods of seismic slope stability, Master's thesis, Hanyang University, pp. 45-66 (in Korean).
  2. Chun, B. S., Kim, W. C. and Yoon, C. K. (2004), The effects of nail inclination in soil nailing by finite element analysis, Journal of Korean Geotechnical Society, Vol, 20, No. 6, pp. 19-27 (in Korean).
  3. Gassler, G. (1988), Theory and practice of earth reinforcement, Proceedings of the International Geotechnical Symposium, A. A Balkema, pp. 283-288.
  4. Han, J. T., Cho, J. S., Yoo, M. T. and Lee, S. H. (2011), A study on seismic retrofit design of the stabilized piles by 1g shaking table tests and pseudo-static analysis, Journal of Korean Society of Hazard Mitigation, Vol. 11, No. 2, pp. 93-101 (in Korean).
  5. Hong, W. P. and Song, Y. S. (2005), An experimental study on the stabilizing effect of piles against sliding, Journal of Korean Geotechnical Society, Vol. 21, No. 1, pp. 69-80 (in Korean).
  6. Hong, Y. S., Wu, C. S., Chen, R. H. and Chen. J. R. (2005), Shaking table tests and stability analysis of steep nailed slopes, Canadian Geotechnical Journal, NRC Canada, Vol. 42, No. 6, pp. 1264-1279. https://doi.org/10.1139/t05-055
  7. Lee, G. S. (2006), Behavior of tailrace-slope using shaking table test, Master's thesis, Chungnam National University, pp. 13-63 (in Korean).
  8. Oh, J. K. (2013), Characteristics of dynamic behavior of slope by constrined soil nail head, Ph D. dissertation, Chungbuk National University, pp. 1-117 (in Korean).
  9. Stocker, M. F. (1979), Soil nailing, Proceedings of the International Conference on Soil Reinforcement, Paris, Vol. 2, pp. 469-474.
  10. Shen, C. K., Bang, S., Herrmann, L. R. and Rornstad, K. M. (1978), A reinforced lateral earth support system, Symposium on Earth Rrinforcement, ASCE, Unites States, pp. 764-793.